Past exam question: 2071 Chaitra, Q3
Open in the Padhaiko appDefine Linear, Stable, Time Invariant and Causal system with suitable examples.
Solution
1. Linear System: A system is linear if it satisfies the principle of superposition (both additivity and homogeneity):
- Example: An ideal resistor or scaling amplifier: .
- Non-linear Example: .
2. Stable System (BIBO Stability): A system is Bounded-Input Bounded-Output (BIBO) stable if every bounded input produces a bounded output:
For an LTI system, this requires absolute integrability of impulse response: .
- Example: An RC lowpass filter: is stable because .
- Unstable Example: An ideal integrator: (bounded step input produces unbounded ramp).
3. Time-Invariant System: A system is time-invariant if a time delay or advance in the input signal produces an identical time shift in the output signal:
- Example: Fixed parameter filter: .
- Time-Variant Example: Amplitude modulation by carrier: .
4. Causal System: A system is causal (non-anticipative) if its output at any present time depends only on current and past values of the input (), and is independent of future inputs ():
- Example: Resistor-capacitor circuit response: .
- Non-causal Example: An ideal interpolator or anticipator: .
- Linear: Obeys superposition (), e.g., .
- Stable (BIBO): Bounded input gives bounded output, e.g., .
- Time-Invariant: Input shift causes identical output shift, e.g., .
- Causal: Output depends only on present and past inputs, e.g., .