Past exam question: 2071 Shrawan, Q1(a)
Open in the Padhaiko appQuestion
Explain digital communication system with general block diagram.
Solution
Block Diagram of Digital Communication System: A digital communication system transfers information from an information source to a sink destination across a physical transmission channel in digital form.
+---------------+ +---------------+ +---------------+
| Information | --> | Source | --> | Channel | --\
| Source | | Encoder | | Encoder | |
+---------------+ +---------------+ +---------------+ |
v
+---------------+ +---------------+ +---------------+ +-----------+
| Destination | <-- | Source | <-- | Channel | | Digital |
| / Sink | | Decoder | | Decoder | | Modulator |
+---------------+ +---------------+ +---------------+ +-----------+
|
v
+---------------+ +-----------+
| Physical | <================== | Tx Link / |
| Channel | | Up-conv |
| (Noise/Loss) | ==================> | Rx Link / |
+---------------+ | Down-conv |
+-----------+
|
v
+-----------+
| Digital |
| Demod |
+-----------+Functional Description of Building Blocks:
- Information Source: Generates the input message signal, which may be analog (voice, sensor telemetry) or digital (text file, binary database).
- Source Encoder: Compresses the message to eliminate statistical redundancy, converting the information into a minimal sequence of binary digits (e.g., Huffman coding, MPEG, JPEG).
- Channel Encoder: Introduces controlled redundancy (parity bits, CRC, Hamming codes, Reed-Solomon codes) into the bitstream to enable error detection and forward error correction (FEC) against channel impairments.
- Digital Modulator: Maps binary bits to analog waveforms (ASK, FSK, PSK, QAM) suitable for transmission over the frequency band of the physical channel.
- Physical Communication Channel: The physical transmission medium (guided cable or unguided wireless atmosphere) that carries the signal. It introduces attenuation, delay distortion, and additive noise.
- Digital Demodulator: Processes the received corrupted RF waveform to reconstruct estimates of the transmitted symbols or bits.
- Channel Decoder: Uses the received parity bits and decoding algorithms (syndrome decoding, Viterbi) to detect and correct errors introduced by the channel.
- Source Decoder & Sink: Decompresses the bitstream to reconstruct the original message and presents it to the destination user.
Answer:
A general digital communication system consists of: Information Source Source Encoder (compression) Channel Encoder (error control) Digital Modulator Channel Demodulator Channel Decoder Source Decoder Destination.