Past exam question: 2071 Shrawan, Q7(b)
Open in the Padhaiko appQuestion
Define Time Division multiplexing (TDM) and explain it briefly.
Solution
Definition of TDM: Time Division Multiplexing (TDM) is a digital multiplexing technique in which multiple low-speed digital channels share a single high-speed transmission medium by interleaving their data in discrete, non-overlapping time intervals called time slots.
- The entire frequency bandwidth of the physical link is dedicated exclusively to one user channel during its designated time slot.
Channel 1 [A1, A2] ---\
Channel 2 [B1, B2] ----> [ Multiplexer Commutator ] ===> Frame: [A1 | B1 | C1] [A2 | B2 | C2] ===> Link
Channel 3 [C1, C2] ---/Operating Mechanism:
- Time Slots and Frames:
- Each input source is assigned a fixed-duration time slot.
- One complete cycle of slots covering all input channels constitutes a TDM frame.
- If there are input channels each operating at bit rate , the multiplexed aggregate link must operate at bit rate:
- Interleaving Methods:
- Bit Interleaving: Each time slot carries exactly one bit from an input line (common in high-speed hardware multiplexers).
- Byte (Character) Interleaving: Each slot carries one byte (8 bits) from an input buffer (common in telecommunication T1/E1 systems).
- Frame Synchronization:
- Framing bits (predefined synchronization bit patterns like alternating
1s and0s) are added to the beginning of each frame. - This enables the demultiplexer to maintain clock synchronization and correctly route slots to their intended destination channels.
- Framing bits (predefined synchronization bit patterns like alternating
- Classification:
- Synchronous TDM: Slots are permanently pre-allocated to channels; idle sources result in empty, wasted slots.
- Statistical (Asynchronous) TDM: Slots are allocated dynamically on-demand only to channels currently holding active data.
Answer:
Time Division Multiplexing (TDM) shares a single high-speed link by assigning recurring time slots within frames to multiple digital input streams—either as fixed dedicated slots (Synchronous TDM) or dynamically to active sources only (Statistical TDM).