PadhaikoAll subjects

Past exam question: 2071 Shrawan, Q8(a)

Data Communication · 4 marks

Open in the Padhaiko app

Topic: Intro switched communication network, connection oriented and…

Question

Define switching. Compare circuit and pocket switching.

Solution

Definition of Switching: Switching is the process of dynamically establishing temporary communication links and routing information from an input port of a network node (switch) to an appropriate output port, connecting arbitrary source and destination end-systems across an interconnected mesh topology.

Comparison: Circuit Switching vs Packet Switching:

ParameterCircuit SwitchingPacket Switching
Dedicated PathDedicated end-to-end physical communication circuit established prior to data transfer.No dedicated path; packets are forwarded independently along dynamic paths using store-and-forward routing.
Connection SetupMandatory setup phase (dialing/signaling) which introduces initial call setup delay.No connection setup required for connectionless datagram mode; immediate transmission.
Bandwidth UtilizationInefficient; reserved channel bandwidth remains blocked even during periods of silence.Highly efficient; dynamic statistical multiplexing allows multiple packet streams to share channel bandwidth.
Transmission LatencyConstant propagation and transmission delay with zero intermediate queuing delay.Variable delay due to intermediate router queuing and store-and-forward packet processing.
Overload BehaviorCalls blocked at connection setup time (busy tone); active calls experience zero degradation.Packets experience increased queuing delay or packet discard when buffers overflow.
Typical UsageTraditional telephone voice networks (PSTN).Computer data networks, the Internet (TCP/IP).
Answer:

Switching dynamically routes data across shared intermediate network nodes. Circuit switching reserves a dedicated physical path for the entire session (constant delay, wastes idle bandwidth), whereas packet switching sends addressed packets over shared links via store-and-forward routing (high utilization, variable queuing delay).

All past exam questions for Data Communication