Past exam question: 2072 Chaitra, Q1
Open in the Padhaiko appDescribe the Transmission Impairments of Data Communication system with suitable examples.
Solution
Attenuation and Attenuation Distortion: Transmission impairments are the degradations that analog or digital signals experience as they propagate through physical transmission media. These impairments alter signal amplitude, phase, and frequency, causing reception errors or data loss.
Transmitted Signal ---> [ Attenuation + Distortion + Noise ] ---> Received Signal (Impaired)
The three primary categories of transmission impairments are attenuation, distortion, and noise.
Attenuation is the progressive loss of signal energy (decrease in amplitude and power) as the signal travels over distance through a transmission medium.
- Physical Cause: Electrical resistance in conductive media (twisted pair, coaxial cable) dissipates energy as heat; absorption and scattering attenuate optical signals in fiber.
- Decibel Measurement: Signal power loss is expressed in decibels:
where is the input power and is the output power at distance .
- Attenuation Distortion: Signals composed of multiple frequency components experience non-uniform attenuation across different frequencies. High-frequency components attenuate faster than lower-frequency components, altering the overall waveform shape.
- Remedy: Amplifiers (for analog signals) or regenerator repeaters (for digital signals) are placed at periodic intervals along the transmission line.
Delay Distortion: Delay distortion occurs because different frequency components of a signal travel at slightly different propagation speeds through guided transmission media.
- Mechanism: In guided media, phase velocity varies with frequency:
As a consequence, frequency components at the edge of the bandwidth arrive at the receiver with different phase shifts relative to components at the center frequency.
- Inter-Symbol Interference (ISI): When harmonics arrive shifted in time, signal pulses spread into adjacent time slots, leading to inter-symbol interference.
- Remedy: Equalizers are installed at receivers to equalize delay across the operational bandwidth.
Noise and Types of Noise: Noise consists of extraneous, unwanted electrical or electromagnetic signals that couple into the transmission medium from external sources or internal thermal activity.
- Thermal Noise (Johnson-Nyquist): Caused by thermal agitation of electrons inside conductors. Power density is uniform across all frequencies (). It cannot be eliminated.
- Intermodulation Noise: Produced when signals of different frequencies share a non-linear transmission medium, creating spurious sum and difference frequencies ().
- Crosstalk: Unwanted inductive or capacitive coupling between adjacent physical channels (e.g., adjacent wire pairs in telephone cables).
- Impulse Noise: Sudden, non-continuous spikes of high amplitude caused by lightning, electromagnetic induction, or power switches. It is the primary cause of bit-burst errors in digital transmission.
The three primary transmission impairments are attenuation (loss of signal strength with distance, e.g., signal fading along long twisted-pair cable), distortion (phase/delay distortion where different frequency components travel at different velocities, causing intersymbol interference), and noise (unwanted random energy—thermal, intermodulation, crosstalk, and impulse noise—superimposed on the signal).