PadhaikoAll subjects

Past exam question: 2072 Chaitra, Q4

Data Communication · 8 marks

Open in the Padhaiko app

Topic: Data Communication Fundamentals

Question

State and explain Shannon-Hartley channel capacity theorem. Briefly discuss about the measures that are used to characterize the performance of a channel.

Solution

Shannon-Hartley Channel Capacity Theorem: The Shannon-Hartley theorem defines the maximum theoretical rate at which information can be transmitted error-free over a continuous communication channel of bandwidth (Hz) perturbed by additive white Gaussian noise (AWGN):

where:

Implications of the Theorem:

  1. Trade-off between Bandwidth and SNR: Channel capacity increases linearly with bandwidth and logarithmically with SNR. A narrow channel with very high SNR can carry the same data rate as a wide channel with low SNR.
  2. Infinite Bandwidth Limit: If bandwidth while signal power and noise spectral density remain fixed ():

Capacity reaches a finite upper asymptote due to thermal noise accumulating proportionally with bandwidth.

Measures Used to Characterize Channel Performance: Channel performance is evaluated through several interrelated metrics:

  1. Bandwidth (): The range of frequencies (in Hz) that the channel can pass with acceptable attenuation. It defines the maximum signaling rate through Nyquist's theorem ().
  2. Throughput: The actual rate of successful data delivery over the channel (in bps), excluding protocol overhead, retransmissions, and idle periods. Throughput is always less than or equal to channel capacity ().
  3. Latency (Propagation and Transmission Delay): The total time required for a packet or bit to travel from source to destination:
  1. Bit Error Rate (BER): The ratio of incorrectly received bits to the total number of transferred bits:
  1. Signal-to-Noise Ratio (SNR): The ratio of signal power to noise power (). High SNR indicates a clean transmission link with lower bit errors.
Answer:

The Shannon-Hartley theorem states the maximum error-free data rate of a noisy channel of bandwidth Hz and linear signal-to-noise ratio is bps. Key channel performance measures are bandwidth, throughput, latency (propagation + transmission + queuing + processing delay), jitter, and SNR.

All past exam questions for Data Communication