Past exam question: 2072 Chaitra, Q6
Open in the Padhaiko appWhat do you mean by multiplexing? Explain about working mechanism of FDM and TDM.
Solution
Definition and Purpose of Multiplexing: Multiplexing is the set of techniques that allows the simultaneous transmission of multiple information signals across a single high-capacity data link or physical transmission medium.
- Goal: To maximize the utilization of expensive transmission infrastructure by combining low-bandwidth channels into one aggregate high-bandwidth transmission path.
- Key Devices:
- Multiplexer (MUX): Combines individual input channels into a single composite link at the transmitting end.
- Demultiplexer (DEMUX): Separates the composite signal back into its constituent individual channels at the receiving end.
Frequency Division Multiplexing (FDM): FDM is an analog multiplexing technique used when the bandwidth of the transmission link is greater than the combined bandwidths of the signals to be transmitted.
Channel 1 (f1) ---[Modulator 1 (fc1)]---\
Channel 2 (f2) ---[Modulator 2 (fc2)]----> [ Summer ] === Composite Link ===> [ Bandpass Filters ] ---> Demodulators
Channel 3 (f3) ---[Modulator 3 (fc3)]---/
- Working Mechanism:
- Each input channel modulates a separate subcarrier frequency ().
- Carrier frequencies are spaced sufficiently far apart so that the modulated signal spectra do not overlap.
- Guard Bands: Narrow unused frequency slots (guard bands) are inserted between adjacent channels to prevent channel overlap and crosstalk caused by non-ideal filter roll-off.
- The modulated carriers are summed and transmitted simultaneously across the shared medium.
- At the receiver, banks of tuned bandpass filters separate each channel, which are then demodulated to recover original baseband signals.
Time Division Multiplexing (TDM): TDM is a digital multiplexing technique that combines multiple digital data streams by interleaving them in the time domain rather than the frequency domain.
Source A [A1, A2, A3] ---\
Source B [B1, B2, B3] ----> [ Rotating Commutator ] === Frame: [A1|B1|C1] [A2|B2|C2] ===> Decommutator
Source C [C1, C2, C3] ---/
- Working Mechanism:
- The total available transmission bandwidth is dedicated to a single user for a brief duration called a time slot.
- One round of time slots for all sources forms a TDM frame.
- Data is multiplexed bit-by-bit (bit interleaving) or byte-by-byte (character/byte interleaving).
- Synchronous TDM: Each connected device is allocated a fixed time slot in every frame, even if it has no data to transmit (unused slots carry null data).
- Framing Bits: Synchronization bits are added to each frame header to ensure the demultiplexer's clock remains synchronized with the incoming slot boundaries.
Multiplexing combines multiple independent signals onto a single shared transmission medium.
- FDM divides channel bandwidth into non-overlapping frequency sub-bands separated by guard bands (analog signals).
- TDM divides transmission time into recurring frames of fixed time slots assigned to each input channel in round-robin order (digital signals).