PadhaikoAll subjects

Past exam question: 2072 Kartik, Q7(b)

Data Communication · 6 marks

Open in the Padhaiko app

Topic: Access introduction to multiplexing, application of multiplexing ·…

Question

Draw block diagram of Frequency Hopping Spread Spectrum transmitter and receiver and explain briefly.

Solution

FHSS Concept: In Frequency Hopping Spread Spectrum (FHSS), the carrier frequency of the modulated data signal hops pseudo-randomly among a wide set of discrete frequency channels within a wide spread spectrum band. The hopping pattern is controlled by a shared Pseudo-Noise (PN) sequence generator.

Transmitter and Receiver Block Diagrams:

FHSS Transmitter:
Binary Data ---> [ FSK Modulator ] ---> [ Mixer / Multiplier ] ---> [ Bandpass Filter ] ---> RF Antenna
                                               ^
                                               |
                                     [ Frequency Synthesizer ]
                                               ^
                                               |
                                     [ PN Code Generator ]

FHSS Receiver:
RF Antenna ---> [ Bandpass Filter ] ---> [ Mixer / Multiplier ] ---> [ FSK Demodulator ] ---> Recovered Data
                                               ^
                                               |
                                     [ Frequency Synthesizer ]
                                               ^
                                               |
                                     [ PN Code Generator ] (Synchronized)

Working Mechanism:

  1. Transmitter Operation:
    • Baseband digital data modulates an intermediate carrier using Frequency Shift Keying (FSK) or BPSK.
    • The PN code generator outputs a pseudo-random binary sequence that directs the frequency synthesizer to emit a carrier frequency that changes periodically every hop interval .
    • The mixer modulates the FSK signal onto the hopping carrier, spreading the transmitted signal power over the wide total bandwidth .
  2. Receiver Operation:
    • The receiver contains an identical PN code generator synchronized in phase with the transmitter.
    • The receiver's synthesizer generates the identical hopping frequency sequence .
    • Mixing the incoming spread signal with the locally generated hopping carrier de-hops the signal, collapsing it back to the original fixed intermediate frequency (IF) band.
    • The standard FSK demodulator subsequently recovers the original data stream.
  3. Classification:
    • Fast FHSS: Multiple frequency hops occur within the duration of a single data bit ().
    • Slow FHSS: Multiple data bits are transmitted during each frequency hop ().
  4. Key Advantages: Robust resistance to narrowband jamming, multipath fading mitigation, and low probability of intercept.
Answer:

In FHSS, the transmitter modulates data with an M-FSK modulator and shifts its carrier frequency across many channels driven by a PN sequence and frequency synthesizer; the receiver uses a synchronized PN generator and synthesizer to de-hop the signal back to a fixed IF for demodulation, mitigating narrowband jamming and multipath fading.

All past exam questions for Data Communication