Past exam question: 2073 Shrawan, Q4(b)
Open in the Padhaiko appQuestion
How synchronous transmission differs from asynchronous transmission?
Solution
Comparison Between Synchronous and Asynchronous Transmission:
| Dimension | Synchronous Transmission | Asynchronous Transmission |
|---|---|---|
| Data Framing | Transmitted as continuous, large blocks or frames of bits | Transmitted one character/byte at a time (typically 8 bits) |
| Start/Stop Bits | Zero start/stop framing bits per character | Each byte is framed by a Start bit (0) and 1 or 2 Stop bits (1) |
| Clocking / Timing | Strict common clock shared or recovered continuously from line code transitions | Sender and receiver clocks operate independently; synchronized on each start bit |
| Gaps Between Data | No idle gaps; continuous bitstream (fill characters transmitted during idle) | Variable-duration, irregular idle gaps between characters |
| Efficiency | High efficiency (minimal protocol framing overhead, typically ) | Low efficiency ( overhead consumed by start/stop bits) |
| Transmission Speed | High speed (, Ethernet, SONET, SDH) | Low to moderate speed (RS-232, legacy modems, keyboards) |
Answer:
- Synchronous transmission sends continuous, clocked frames of bits without start/stop bits per byte, achieving high speed and high spectral efficiency using shared clock recovery.
- Asynchronous transmission frames each individual byte with explicit start (
0) and stop (1) bits, accommodating irregular, bursty character arrivals at lower speeds with higher framing overhead.