Past exam question: 2074 Ashwin, Q6(a)
Open in the Padhaiko appQuestion
Define multiplexing with example. Compare synchronous and asynchronous TDM.
Solution
Definition of Multiplexing: Multiplexing is the technique of transmitting multiple independent information signals simultaneously over a single physical transmission link.
- Example: A standard T1 digital telephone trunk multiplexes 24 separate digital voice channels onto a single wire pair using Time Division Multiplexing.
Comparison: Synchronous TDM vs. Asynchronous (Statistical) TDM:
| Parameter | Synchronous TDM | Asynchronous (Statistical) TDM |
|---|---|---|
| Time Slot Allocation | Fixed, dedicated time slots pre-allocated to each connected input line in every frame | Dynamic allocation on-demand; slots granted only to lines with active data |
| Idle Capacity | Wasted; empty time slots are transmitted if a source has no data | High efficiency; idle sources consume no channel slots |
| Addressing | Zero overhead; slot position implicitly identifies the transmitting channel | Requires address header in each slot to identify the source channel |
| Aggregate Rate | Trunk speed must equal or exceed the sum of peak channel rates | Trunk speed can be significantly lower than sum of peak channel rates |
| Buffering | Minimal | Requires input queues/buffers to manage bursty traffic |
Answer:
Multiplexing combines multiple channels over one physical line (e.g., T1 multiplexing 24 voice calls onto one line).
- Synchronous TDM assigns dedicated, unchanging time slots to each channel (wasting bandwidth during silence, but requiring no addressing).
- Asynchronous TDM (Statistical TDM) dynamically allocates slots only to active lines, achieving superior bandwidth utilization for bursty data at the expense of addressing overhead and queuing delays.