Past exam question: 2075 Ashwin, Q1
Open in the Padhaiko appQuestion
Describe the transmission impairments of data communication system with suitable example.
Solution
Overview of Transmission Impairments: In any physical communication channel, the signal received at the destination is never an exact replica of the signal transmitted. It experiences physical degradation known as transmission impairments, classified into three fundamental categories:
- Attenuation:
- The progressive reduction in signal energy/amplitude as the signal traverses the physical medium over distance.
- Cause: Electrical resistance in copper cables and scattering/absorption in optical fibers.
- Example: A pulse transmitted over unshielded twisted pair (UTP) drops to after , requiring an amplifier or regenerative repeater to restore its signal level.
- Distortion:
- The alteration of the waveform shape that occurs when different frequency components of a composite signal travel at different velocities (delay distortion) or experience unequal attenuation (amplitude distortion).
- Cause: Non-linear phase/frequency characteristics of guided media.
- Example: In high-speed data transmission over telephone lines, high frequencies arrive slower than low frequencies, causing pulses to spread out and spill into adjacent time slots, generating Inter-Symbol Interference (ISI).
- Noise:
- Unwanted extraneous electrical energy that combines additively with the transmitted signal.
- Types: Thermal noise (random electron motion, ), intermodulation noise (harmonic mixing in non-linear components), crosstalk (electromagnetic coupling between adjacent wire pairs), and impulse noise (sharp voltage spikes from lightning, motor switches, or power surges).
- Example: A lightning flash induces a brief millivolt pulse onto a telephone wire, flipping a
0into a1and corrupting a data packet.
Answer:
The three primary transmission impairments are:
- Attenuation: Loss of signal strength over distance due to medium resistance (e.g., amplitude drop in long copper lines requiring repeaters).
- Distortion: Waveform deformation due to frequency-dependent velocity or attenuation (e.g., delay distortion causing ISI).
- Noise: Unwanted additive interference (thermal noise, crosstalk between adjacent wires, and impulse noise from lightning surges).