Past exam question: 2075 Ashwin, Q6(a)
Open in the Padhaiko appQuestion
Explain, how spread spectrum techniques like FHSS and DSSS work?
Solution
How Direct Sequence Spread Spectrum (DSSS) Works:
- Spreading Process:
- The narrowband baseband digital data stream with bit rate is directly multiplied by a high-rate pseudorandom noise (PN) sequence with chipping rate .
- This multiplication spreads the baseband signal power over a wide RF bandwidth . The ratio is the Processing Gain.
- Modulation & Transmission: The wideband product modulates an RF carrier using BPSK/QPSK and is transmitted across the channel.
- Despreading at Receiver:
- The receiver multiplies the received signal by an identical, locally synchronized PN code sequence.
- Because , the desired signal is collapsed (despread) back to its original narrowband information bandwidth.
- Any narrowband interference or jamming signal is multiplied by only once, spreading its power across , allowing a narrow low-pass filter to reject the overwhelming majority of noise.
How Frequency Hopping Spread Spectrum (FHSS) Works:
- Hopping Mechanism:
- The total available wideband transmission bandwidth is divided into distinct frequency channels (bins) of equal width.
- Data bits first modulate an intermediate carrier via M-ary FSK.
- A Pseudorandom Noise (PN) generator outputs a pseudo-random sequence of channel addresses, controlling a fast frequency synthesizer.
- The carrier frequency hops pseudo-randomly among the channels at regular intervals of hop time .
- De-hopping at Receiver:
- The receiver uses an identical synchronized PN generator and synthesizer to produce matching carrier frequencies.
- Mixing the incoming hopped RF signal with the matching local carrier de-hops the signal back to a fixed intermediate frequency, where a standard demodulator recovers the data.
- A jammer transmitting on any single frequency disrupts only occasional hops without breaking the overall communication link.
Answer:
- DSSS directly multiplies each data bit by a high-rate pseudorandom noise (PN) chip sequence (), spreading the signal over a wide bandwidth. The synchronized receiver correlates with the same PN sequence to despread the signal while suppressing noise.
- FHSS rapidly switches the transmission carrier frequency among discrete frequency channels according to a PN sequence. The receiver hops synchronously, avoiding narrowband jammers and multipath fading.