Past exam question: 2075 Chaitra, Q1
Open in the Padhaiko appQuestion
Sketch a generic block diagram of digital data communication system for full duplex mode.
Solution
Architecture of a Full-Duplex Digital Communication System: In a full-duplex (FDX) digital communication system, two communicating stations (Node A and Node B) can transmit and receive information simultaneously in both directions over a shared transmission medium:
+---------------------------------------------------------------------------------------------------------+
| STATION A |
| |
| [ Data Source ] ---> [ Source Encoder ] ---> [ Channel Encoder ] ---> [ Modulator ] ---> [ Tx Filter ] |
| | |
| v |
| [ Duplexer / |
| Hybrid ] |
| ^ |
| | |
| [ Data Sink ] <--- [ Source Decoder ] <--- [ Channel Decoder ] <--- [ Demodulator ] <--- [ Rx Filter ] |
+--------------------------------------------------------------------------------------------------|------+
|
=======================
Physical Channel
(FDD / TDD / 4-Wire)
=======================
|
+--------------------------------------------------------------------------------------------------|------+
| STATION B v |
| [ Duplexer / |
| Hybrid ] |
| | ^ |
| [ Rx Filter ] ---> [ Demodulator ] ---> [ Channel Decoder ] ---> [ Source Decoder ] ---> [ Data Sink] |
| | |
| [ Data Source ] ---> [ Source Encoder ] ---> [ Channel Encoder ] ---> [ Modulator ] ---> [ Tx Filter ] |
| |
| |
+---------------------------------------------------------------------------------------------------------+Key Components and Duplexing Mechanism:
- Transmitter Branch (Forward Path):
- Source Encoder: Compresses data and removes natural redundancy (e.g., Huffman, PCM).
- Channel Encoder: Injects forward error correction (FEC) parity bits (e.g., CRC, Hamming).
- Digital Modulator: Maps binary symbols into physical waveforms (e.g., QPSK, QAM, line codes).
- Transmit Filter: Restricts signal spectrum to prevent adjacent-channel interference.
- Receiver Branch (Reverse Path):
- Receive Filter / Equalizer: Rejects out-of-band noise and corrects channel dispersion.
- Demodulator: Reconstructs the digital symbol sequence via matched filtering and threshold detection.
- Channel Decoder: Detects and corrects transmission bit errors.
- Source Decoder: Decompresses data to recover original user information.
- Duplexing Mechanism (Simultaneous Two-Way Isolation):
- Frequency Division Duplexing (FDD): Separates forward and reverse paths onto distinct uplink () and downlink () carrier frequencies using a Duplexer filter.
- Time Division Duplexing (TDD): Rapidly alternates transmission directions over small time frames on the same frequency.
- Four-Wire / Echo Cancellation: Two dedicated conductor pairs or digital echo cancellers isolate concurrent transmit and receive streams on wired lines.
Answer:
A full-duplex digital communication block diagram features identical dual transmitter and receiver chains at both communicating nodes:
- Each node houses a Source Encoder, Channel Encoder, and Modulator on the transmit path, and a Demodulator, Channel Decoder, and Source Decoder on the receive path.
- A Duplexer / Hybrid circuit connects both paths to the shared medium, maintaining simultaneous bidirectional transmission through Frequency Division Duplexing (FDD) or Time Division Duplexing (TDD).