Past exam question: 2075 Chaitra, Q4(b)
Open in the Padhaiko appQuestion
Explain in detail Bipolar 8-zero substitution and High Density 3-zero substitution techniques.
Solution
Motivation for Scrambling Techniques in Bipolar AMI: Standard Bipolar AMI (where bit 0 is and bit 1 alternates between and ) guarantees zero DC bias. However, when a long sequence of consecutive zeros occurs, the line stays at with zero voltage transitions. This causes receiver Phase-Locked Loops (PLLs) to lose clock synchronization. To solve this without adding DC bias, scrambling techniques deliberately substitute long runs of zeros with special patterns containing controlled AMI violations ().
B8ZS (Bipolar 8-Zero Substitution) Technique:
- Standard: Used widely in North American T1 carrier systems ().
- Rule: Whenever a block of 8 consecutive zeros (
00000000) occurs, it is substituted with the 8-pulse code:
where:
- is a Violation pulse: has the same polarity as the preceding non-zero pulse, violating the AMI alternation rule.
- is a Bipolar pulse: alternates polarity according to normal AMI rules relative to the previous pulse.
- Polarity Assignment:
- If previous non-zero pulse was positive (): substitution is .
- If previous non-zero pulse was negative () substitution is .
- Receiver Operation: The receiver observes two intentional violations with alternating polarities ( followed by with opposite sign), recognizes the B8ZS signature, replaces the pattern with 8 zeros, and restores the original data without corrupting clock timing.
HDB3 (High Density Bipolar 3-Zero) Technique:
- Standard: Adopted widely in European and ITU-T E1 carrier systems ().
- Rule: Limits consecutive zeros to at most 3. Whenever 4 consecutive zeros (
0000) occur, they are replaced by either:- if the number of non-zero pulses () since the last violation is odd.
- if the number of non-zero pulses () since the last violation is even.
- Maintaining Zero DC Bias: Successive violation pulses () must alternate in polarity (e.g., , then , then ). If using would cause two successive violations to have the same polarity, the rule is invoked instead to maintain perfect DC balance.
Answer:
- B8ZS (North America, T1): Replaces every run of 8 consecutive zeros with . Two deliberate AMI violations () of opposite polarities force clock transitions while maintaining zero net DC bias.
- HDB3 (Europe/ITU-T, E1): Replaces every run of 4 consecutive zeros with (if non-zero pulse count since last violation is odd) or (if even), ensuring at least one voltage transition every 4 bit intervals with alternating violations to preserve DC neutrality.