PadhaikoAll subjects

Past exam question: 2075 Chaitra, Q9(a)

Data Communication · 2 marks

Open in the Padhaiko app

Topic: Wireless propagation (Introduction to groundwave propagation, sky…

Question

Explain why channel coding is required in data communication.

Solution

The Need for Channel Coding: In physical data transmission channels, signals are inevitably impaired by thermal noise, impulse noise, crosstalk, multipath fading, and distortion. These impairments cause transmitted bits ( or ) to flip polarity, leading to packet corruption. Channel coding is required to:

  1. Detect and Correct Transmission Errors: By adding controlled mathematical parity bits (redundancy) to the message stream (e.g., CRC, Hamming codes, Reed-Solomon), the receiver can detect and autonomously correct bit errors without demanding slow retransmissions.
  2. Lower Transmission Power Requirements (Coding Gain): Channel coding allows communication systems to achieve a desired low Bit Error Rate (BER) at significantly lower Signal-to-Noise Ratios (), enabling extended transmission range and battery life in mobile devices.
Answer:

Channel coding is required to protect digital data against errors caused by physical transmission impairments (noise, fading, and interference). By adding controlled mathematical redundancy, it enables receivers to detect and correct bit errors autonomously (Forward Error Correction), achieving low Bit Error Rates (BER) at reduced transmission power.

All past exam questions for Data Communication