PadhaikoAll subjects

Past exam question: 2076 Ashwin, Q6

Data Communication · 8 marks

Open in the Padhaiko app

Topic: Access introduction to multiplexing, application of multiplexing ·…

Question

Define Frequency division Multiplexing. Explain the FDM Multiplexing and demultiplexing process with neat diagrams.

Solution

Definition of Frequency Division Multiplexing (FDM): Frequency Division Multiplexing (FDM) is an analog multiplexing technique where the total usable bandwidth of a transmission medium is partitioned into multiple non-overlapping frequency sub-bands (channels). Each sub-band carries an independent baseband signal modulated onto a distinct RF carrier frequency. To avoid spectral overlap and inter-channel crosstalk, narrow unused frequency intervals called guard bands are inserted between adjacent channel bands.

FDM Multiplexing Process (Transmitter):

  1. Multiple baseband analog signals enter the multiplexer.
  2. Each baseband signal modulates a unique carrier frequency () using AM, SSB, or FM.
  3. The modulated signals are passed through bandpass filters (BPFs) to restrict out-of-band harmonics and establish guard bands.
  4. A linear summing amplifier combines all filtered bandpass signals into a single composite aggregate waveform for transmission over the wideband medium.
Multiplexing Process:
m1(t) ---> [ Modulator fc1 ] ---> [ BPF 1 ] ---\
m2(t) ---> [ Modulator fc2 ] ---> [ BPF 2 ] ----+---> [ Summing Amp ] ---> Channel
mn(t) ---> [ Modulator fcn ] ---> [ BPF n ] ---/

FDM Demultiplexing Process (Receiver):

  1. The composite signal arrives at the receiver from the shared transmission medium.
  2. A parallel bank of narrow Bandpass Filters (BPFs), each tuned precisely to carrier center frequencies , separates the individual modulated sub-channels.
  3. Each separated bandpass signal is delivered to its corresponding demodulator, which extracts the original baseband signal () via envelope or coherent detection.
  4. Low-pass filters smooth the recovered baseband signals.
Demultiplexing Process:
           /---> [ BPF 1 (fc1) ] ---> [ Demodulator 1 ] ---> m1(t)
Channel --+----> [ BPF 2 (fc2) ] ---> [ Demodulator 2 ] ---> m2(t)
           \---> [ BPF n (fcn) ] ---> [ Demodulator n ] ---> mn(t)
Answer:

FDM subdivides a wideband medium into separate frequency channels separated by guard bands.

All past exam questions for Data Communication