Past exam question: 2076 Ashwin, Q9(a)
Open in the Padhaiko appQuestion
Write short note on: Analog versus digital mux hierarchy
Solution
Architectural Concepts of Multiplexing Hierarchies: To handle massive telecommunication trunk traffic, carriers group low-capacity channels hierarchically into progressively higher-bandwidth multiplexed transmission streams:
- Analog Multiplexing Hierarchy (FDM): Uses single-sideband (SSB-AM) modulation and analog bandpass filters to stack analog voice channels in the frequency domain.
- Digital Multiplexing Hierarchy (TDM): Digitizes voice into PCM channels (DS0) and interleaves octets/frames in the time domain using synchronous TDM.
Comparison of Hierarchical Levels:
- Analog (AT&T FDM Hierarchy):
- Group: 12 voice channels ( bandwidth, )
- Supergroup: 5 groups = 60 voice channels ()
- Mastergroup: 10 supergroups = 600 voice channels ()
- Jumbogroup: 6 mastergroups = 3600 voice channels
- Digital (Plesiochronous Digital Hierarchy - PDH / T-Carrier & E-Carrier):
- DS0: 1 voice channel =
- T1 / DS1 (North America): 24 DS0 channels =
- E1 (Europe/ITU-T standard in Nepal): 30 voice channels + 2 control channels = 32 slots =
- Higher levels: T3 (), E3 (), leading into SONET/SDH optical backbones.
Answer:
The analog hierarchy uses FDM to combine voice channels into Groups (12 ch), Supergroups (60 ch), and Mastergroups (600 ch) via SSB-AM. The digital hierarchy uses TDM to combine DS0 channels into T1 (24 ch, ) or E1 (32 ch, ) frames, providing higher reliability, superior noise immunity, and compatibility with optical transmission (SDH/SONET).