PadhaikoAll subjects

Past exam question: 2076 Chaitra, Q1(a)

Data Communication · 6 marks

Open in the Padhaiko app

Topic: Introduction

Question

Draw a generic block diagram of a digital communication system used in mobile telephony and explain each block.

Solution

Block Diagram of Digital Communication System in Mobile Telephony:

[ User Speech ] ---> [ Microphone / ADC ] ---> [ Source Encoder (Speech Codec) ]
                                                            |
[ Channel / RF Medium ] <--- [ RF Upconverter / PA ] <--- [ Digital Modulator ] <--- [ Channel Encoder (FEC / Interleaver) ]

In modern cellular mobile systems (e.g., GSM / LTE), the link comprises specialized transmitter blocks matched with complementary receiver processing stages.

Detailed Functional Explanation of Each Block:

  1. Source Transducer & ADC (Analog-to-Digital Converter):
    • Captures continuous acoustic speech pressure waves via microphone and converts them into an uncompressed digital PCM bitstream (e.g., 8000 samples/sec at 13 bits/sample).
  2. Source Encoder (Speech Codec):
    • Compresses raw digital speech by exploiting vocal tract redundancy (e.g., GSM RPE-LTP codec compresses down to ), drastically conserving radio bandwidth.
  3. Channel Encoder (Forward Error Correction - FEC & Interleaver):
    • Adds controlled mathematical redundancy (e.g., convolutional coding or turbo/LDPC coding) to detect and correct bit errors induced by wireless multipath fading and interference.
    • The Interleaver permutes code bits over time to break burst errors caused by deep fading dips into manageable random single-bit errors.
  4. Digital Modulator:
    • Maps encoded binary bits onto radio frequency carrier waveforms (e.g., GMSK in GSM, QPSK/QAM in 4G/5G) to prepare the signal for electromagnetic radiation.
  5. RF Front-End & Antenna (Power Amplifier - PA & Upconverter):
    • Up-converts baseband modulated signals to the operational cellular band (e.g., , , ) and amplifies transmission power.
  6. Receiver Blocks (Reverse Chain):
    • Low Noise Amplifier (LNA), Down-converter, Demodulator/Equalizer, De-interleaver, Channel Decoder, Source Decoder, and DAC/Speaker to reconstruct audible analog speech.
Answer:

The generic digital communication block diagram for mobile telephony consists of:

  1. ADC: Converts analog voice to raw digital bits.
  2. Source Encoder: Compresses speech to minimize bit rate.
  3. Channel Encoder & Interleaver: Introduces FEC redundancy and scrambles bit order to protect against fading and burst errors.
  4. Digital Modulator: Modulates the bitstream onto RF carrier phases/frequencies (e.g., GMSK, QAM).
  5. RF Power Amplifier & Antenna: Transmits electromagnetic radio waves over the cellular channel.

All past exam questions for Data Communication