Past exam question: 2076 Chaitra, Q6(a)
Open in the Padhaiko appQuestion
What is multiplexing? Compare synchronous and statistical TDM.
Solution
Definition and Objective of Multiplexing: Multiplexing is the set of techniques that allows the simultaneous transmission of multiple independent information signals across a single shared high-capacity physical transmission medium (link). Its primary engineering goal is to maximize transmission channel utilization and reduce infrastructure cost by aggregating low-speed data streams into a single high-speed aggregate trunk.
Detailed Comparison: Synchronous TDM vs. Statistical TDM:
| Dimension | Synchronous TDM (STDM) | Statistical TDM (ATDM / Dynamic TDM) |
|---|---|---|
| Time Slot Allocation | Pre-assigned, fixed, and dedicated time slots for each input channel in every frame | Dynamic allocation on-demand; slots allocated only to channels currently having data |
| Idle Channel Handling | Empty time slots are transmitted if a source is idle, wasting channel capacity | No slots wasted; idle channels get no bandwidth |
| Aggregate Line Capacity | Sum of maximum peak capacities of all input channels () | Can be significantly less than the sum of peak rates () |
| Addressing Overhead | Zero addressing overhead (slot position implicitly identifies the source) | Requires addressing header in each slot to identify channel/source ID |
| Framing & Buffering | Simple framing; minimal memory buffering needed | Requires input memory buffers and queuing management |
| Traffic Suitability | Continuous, constant-bit-rate (CBR) traffic (e.g., PCM voice trunks like T1/E1) | Bursty, variable-bit-rate (VBR) data traffic (e.g., LAN/Internet traffic) |
Answer:
Multiplexing is the simultaneous transmission of multiple independent signals across a single shared physical link.
- Synchronous TDM assigns fixed, dedicated time slots to each input line regardless of activity, leading to wasted bandwidth during idle periods but requiring zero addressing overhead.
- Statistical TDM dynamically allocates slots only to active lines transmitting data, dramatically improving channel utilization for bursty traffic at the cost of slot addressing overhead and buffering.