Past exam question: 2076 Chaitra, Q6(b)
Open in the Padhaiko appDescribe Frequency hopping spread spectrum and direct sequence spread spectrum with its block diagram.
Solution
Operating Principle of DSSS (Direct Sequence Spread Spectrum): In DSSS, the incoming narrowband baseband data bitstream (bit rate ) is multiplied directly by a high-rate pseudorandom noise (PN) chipping sequence (chip rate ). This multiplication expands the signal bandwidth by the factor of Processing Gain:
The spread signal is then carrier-modulated (via BPSK/QPSK). At the receiver, multiplying the received signal by the identical synchronized PN code despreads the desired signal back to baseband while spreading and rejecting any narrowband jammer.
DSSS Block Diagram:
Data d(t) ---> [ Multiplier (XOR) ] ---> [ BPSK Modulator ] ---> RF Out
^ ^
| |
PN Generator Carrier OscillatorOperating Principle of FHSS (Frequency Hopping Spread Spectrum): In FHSS, the modulated carrier frequency is rapidly shifted among a set of discrete frequency bins across a broad frequency band according to a pseudo-random sequence.
FHSS Block Diagram:
Data In ---> [ FSK Modulator ] ---> [ Frequency Mixer ] ---> RF Out
^
|
[ Frequency Synthesizer ]
^
|
[ PN Generator ]
The frequency synthesizer hops carrier frequencies under the control of the PN code. The receiver tracks these hops synchronously, filtering out jamming and interference present on unselected channels.
- DSSS directly multiplies each data bit by a high-rate PN chip sequence (), spreading the signal across a wide bandwidth and providing high processing gain against noise and jamming.
- FHSS rapidly switches the transmission carrier among discrete frequency channels according to a PN sequence, avoiding narrowband interference and eavesdropping.