Past exam question: 2078 Bhadra, Q2
Open in the Padhaiko appQuestion
List and describe all data communication parameters that describe the performance of the system.
Solution
Key Data Communication Performance Parameters: System performance in data communications evaluates how swiftly, reliably, and accurately information traverses from source to destination. The primary metrics are:
- Bandwidth
- Throughput
- Latency (Delay)
- Jitter (Delay Variation)
- Bit Error Rate (BER) & Packet Loss Rate
- Signal-to-Noise Ratio (SNR)
Detailed Descriptions of Each Metric:
- Bandwidth (Hz and bps):
- Hertz (Analog Bandwidth): The width of the frequency band () passed by the channel with acceptable attenuation.
- Bits per second (Digital Bandwidth): The maximum theoretical capacity or bit-carrying potential of a network link (e.g., Ethernet).
- Throughput:
- The actual rate of successful data delivery over a communication channel in practice, measured in bits per second (bps).
- Throughput is always less than bandwidth due to protocol framing overhead, medium contention, retransmissions, processing bottlenecks, and flow control throttling.
- Latency (One-Way Delay):
- The total time required for an entire message or packet to travel from the sender to the destination. Latency is the sum of four discrete components:
where (distance over velocity) and (packet length over link data rate).
- Jitter (Delay Variation):
- The statistical variance or irregularity in packet arrival times. High jitter causes packet buffering issues, speech distortion in VoIP, and choppy streaming video.
- Bit Error Rate (BER) and Packet Loss:
- . Packet loss measures the percentage of packets dropped due to buffer overflow or uncorrectable checksum errors.
- Signal-to-Noise Ratio (SNR):
- The ratio of signal power to background noise power (), determining maximum channel capacity via Shannon's law.
Answer:
The key performance parameters are:
- Bandwidth: Theoretical maximum channel frequency width (Hz) or link bit rate capacity (bps).
- Throughput: Actual measured rate of successful data transfer (bps).
- Latency: Total end-to-end delay (propagation, transmission, queuing, processing).
- Jitter: Variation in packet arrival delays, critical for real-time traffic.
- Bit Error Rate (BER) / Packet Loss: Fraction of bits/packets corrupted or dropped during transit.
- Signal-to-Noise Ratio (SNR): Measure of signal strength relative to channel noise floor.