Past exam question: 2078 Kartik, Q3(a)
Open in the Padhaiko appHow Nyquist theorem applied for a noiseless channel?
Solution
Nyquist Formulation for Noiseless Channel Data Rate: In 1928, Harry Nyquist established that if an arbitrary signal is passed through an ideal low-pass filter of bandwidth Hertz, the maximum rate at which independent signal pulses (symbols) can be transmitted without Inter-Symbol Interference (ISI) is pulses per second (baud):
If each transmitted pulse carries a binary symbol ( discrete voltage levels), each pulse represents bit (), yielding a maximum bit rate of:
Extension to Multilevel Signaling (-ary Modulation): When each signal pulse is permitted to take on distinct discrete amplitude or phase levels (), each symbol conveys:
Applying this to the maximum symbol rate yields Nyquist's Channel Capacity Formula:
where:
- is the theoretical maximum data rate (channel capacity) in bps,
- is the channel bandwidth in Hertz,
- is the number of discrete signal voltage/phase levels.
Practical Application and Physical Limitations:
- Noiseless Assumption: Nyquist's formula assumes an ideal noiseless medium where an arbitrarily high data rate can theoretically be achieved by continuously increasing the number of signaling levels .
- Receiver Detection Resolution: In real transmission systems, thermal noise imposes a fundamental upper limit on how closely spaced levels can be before the receiver misclassifies adjacent levels, leading to Claude Shannon's capacity limit.
For a noiseless channel of bandwidth , the Nyquist theorem defines the maximum theoretical bit rate as:
where is the maximum symbol rate without inter-symbol interference and is the number of discrete signaling levels, allowing each symbol to convey bits.