Past exam question: 2078 Kartik, Q5(c)
Open in the Padhaiko appQuestion
Explain bipolar AMI line coding scheme with example and compare it with polar RZ.
Solution
Operating Principle of Bipolar AMI (Alternate Mark Inversion): Bipolar AMI uses three signaling levels: , , and :
- Binary 0: Always represented by zero voltage () for the full bit duration .
- Binary 1: Represented by alternating positive and negative pulses ( and ) of full bit duration . The first
1is , the second1is , the third is , and so forth.
Example for Bitstream 1 0 1 1 0:
- Bit 1 (
1): - Bit 2 (
0): - Bit 3 (
1): (inverted polarity from previous1) - Bit 4 (
1): (inverted polarity from previous1) - Bit 5 (
0):
Comparison Between Polar RZ and Bipolar AMI:
| Technical Parameter | Polar RZ | Bipolar AMI |
|---|---|---|
| Voltage Levels | 3 levels () | 3 levels () |
| Representation of 0 | transitioning to | Flat for entire bit duration |
| Representation of 1 | transitioning to | Alternating and pulses |
| DC Component | Zero only if equal 0s and 1s | Strictly zero DC component regardless of bit sequence |
| Bandwidth Requirement | High (, due to half-bit pulse) | Low (, matches NRZ) |
| Clock Synchronization | Continuous (transitions in every bit) | Fails during long runs of consecutive 0s |
| Error Detection | None built-in | Built-in (two consecutive same-polarity pulses indicate a violation) |
Answer:
In Bipolar AMI, bit 0 is and bit 1 alternates between and . Compared to Polar RZ:
- Bipolar AMI requires half the bandwidth of Polar RZ.
- Bipolar AMI guarantees zero DC component and provides error-detection through AMI violation detection.
- Polar RZ provides superior clock synchronization during long runs of zeros, whereas AMI loses synchronization during long zero strings.