Past exam question: 2078 Kartik, Q8(b)
Open in the Padhaiko appExplain the "near-far problem" in CDMA. How can it be solved?
Solution
The Near-Far Problem in CDMA Systems: In Code Division Multiple Access (CDMA), all mobile stations transmit simultaneously over the exact same frequency band using orthogonal or quasi-orthogonal spreading codes (e.g., Walsh codes or Gold codes).
- The receiver at the base station detects a desired user's signal by correlating the composite incoming signal with that user's specific spreading code.
- If a mobile transmitter is located very near the base station, its signal arrives with very high power.
- Conversely, a mobile transmitter located far away on the cell boundary suffers heavy path loss (), arriving with minuscule power.
- Although the spreading codes are designed to be orthogonal, cross-correlation in asynchronous uplink channels is non-zero. The strong near transmitter's cross-correlation sidelobes overwhelm and drown out the faint far transmitter, causing severe desensitization or complete loss of reception.
Solutions to the Near-Far Problem:
- Fast Closed-Loop Transmission Power Control (TPC):
- The base station constantly monitors the received Signal-to-Interference Ratio (SIR) of each mobile station (e.g., 1,500 times per second in UMTS/WCDMA).
- If a mobile's signal is too strong, the base station commands it to reduce transmission power; if too weak, it commands an increase.
- This ensures all mobile signals arrive at the base station with approximately equal power levels.
- Multi-User Detection (MUD) and Interference Cancellation:
- Advanced DSP receivers estimate and subtract the interference contributed by strong near users before decoding weaker signals.
The near-far problem occurs in CDMA when an uncoordinated transmitter close to the base station transmits with high power, swamping the weak signals of distant transmitters due to non-zero code cross-correlation. It is primarily solved using rapid closed-loop power control, where the base station dynamically commands each mobile to adjust its transmit power so all signals arrive at the receiver with equal power.