Past exam question: 2079 Baishakh (Back), Q2(a)
Open in the Padhaiko appA system's output is given as:
where is its input. Determine whether the system is LTI or not.
Solution
Testing the Linearity Property (Superposition Principle): A system is linear if and only if it satisfies the principle of superposition, comprising both additivity and homogeneity (scaling):
- Additivity Test: Let and be the system responses to arbitrary inputs and respectively:
Consider a composite input . The output for is:
Now, sum the individual responses and :
Comparing and :
The additivity property is violated due to the constant additive offset .
- Zero-Input Verification: A necessary condition for any linear system is that a zero input produces a zero output ():
Because the system produces a non-zero output for zero input, it is definitively non-linear.
Testing the Time-Invariance Property: A system is time-invariant if a time shift in the input signal causes an identical time shift in the output signal:
- Response to Time-Shifted Input: Let the input be delayed by an arbitrary time :
The system response to this delayed input is:
- Delayed Original Output: Now, evaluate the original output delayed by :
Comparing both expressions:
Therefore, the system is time-invariant.
Conclusion on LTI Classification: For a system to be classified as an LTI (Linear Time-Invariant) system, it must satisfy both linearity and time-invariance simultaneously.
- Linearity: Violated (Non-linear).
- Time-Invariance: Satisfied (Time-invariant).
Since the system fails the linearity requirement, the system is not an LTI system.
The system is time-invariant but non-linear (additivity fails: , and zero-input yields ).
Because it fails the linearity condition, the system is not an LTI system.