Past exam question: 2079 Baishakh (Back), Q5(c)
Open in the Padhaiko appQuestion
Explain the operation of FDM clearly with diagram.
Solution
Operating Principle of Frequency-Division Multiplexing (FDM): Frequency-Division Multiplexing (FDM) is an analog multiplexing technique applied when the total usable bandwidth of a transmission medium significantly exceeds the individual bandwidths of the signals to be transmitted:
- Modulation and Carrier Frequency Translation:
- Multiple input baseband signals , each having limited bandwidth , modulate distinct, non-overlapping analog subcarrier frequencies using AM, SSB, or FM modulation.
- This shifts the spectrum of each message signal into an exclusive frequency band across the spectrum.
- Composite Summation and Guard Bands:
- The modulated subcarrier signals are combined by a linear summing circuit into a single composite broadband signal.
- Small unused frequency intervals called Guard Bands are placed between adjacent modulated channels. Guard bands prevent spectral overlap, inter-channel crosstalk, and relax the cutoff sharpness requirements of receiver bandpass filters.
- Demultiplexing and Detection:
- At the receiver, the composite signal passes through a bank of parallel Bandpass Filters (BPFs), each tuned to pass only one subcarrier band while rejecting all others.
- Demodulators recover the original baseband messages .
Block Diagram and Frequency Spectrum Layout:
TRANSMITTER ARCHITECTURE:
[Message 1: B] ---> [Modulator fc1] ---+
|
[Message 2: B] ---> [Modulator fc2] ---+--> [Linear Summer] ===> [Shared Wideband Medium]
|
[Message N: B] ---> [Modulator fcN] ---+
RECEIVER ARCHITECTURE:
+---> [BPF fc1] ---> [Demodulator 1] ---> [Message 1 Out]
|
====== [Composite Signal] ===+---> [BPF fc2] ---> [Demodulator 2] ---> [Message 2 Out]
|
+---> [BPF fcN] ---> [Demodulator N] ---> [Message N Out]
COMPOSITE FREQUENCY SPECTRUM:
Magnitude
^
| Ch 1 Guard Band Ch 2 Guard Band Ch 3
| /\ /\ |--| /\ /\ |--| /\ /\
| / \/ \ | | / \/ \ | | / \/ \
+----+----+-------+--+----+----+----+-------+--+----+----+----+-----> Frequency (f)
fc1 fc2 fc3Answer:
FDM Operation Summary:
- Baseband signals modulate separate, non-overlapping subcarrier frequencies ().
- Modulated signals are linearly summed into a composite broadband signal with intervening guard bands to eliminate crosstalk.
- At the receiving end, tuned bandpass filters isolate each carrier channel before individual demodulators extract the original messages.