PadhaikoAll subjects

Past exam question: 2079 Baishakh (Back), Q6(b)

Data Communication · 6 marks

Open in the Padhaiko app

Topic: Access introduction to multiplexing, application of multiplexing ·…

Question

Explain frequency hopping spread spectrum and direct sequence spread spectrum with its block diagram.

Solution

Direct Sequence Spread Spectrum (DSSS) Operation and Block Diagram: In Direct Sequence Spread Spectrum (DSSS), the baseband data stream of bit duration is directly multiplied by a high-rate pseudorandom noise (PN) bit sequence consisting of pulses called chips of duration ():

  1. Transmission Mechanism:
    • The chip rate is much greater than the data bit rate .
    • Multiplying by produces a composite signal whose spectral bandwidth is expanded by the spreading factor:
  1. Reception Mechanism (Despreading):
    • The receiver multiplies the incoming signal by a locally generated, phase-synchronized replica of the identical PN code .
    • Since for polar signaling (), the data is restored: .
    • Concurrently, any narrowband jammer or noise entering the receiver is multiplied by , spreading its energy across the wide bandwidth, which is then removed by a low-pass data filter.
DSSS TRANSMITTER:
Data d(t) ----+
              |
              v (Multiplier)
             [ x ] ------------> [ BPSK Modulator ] ===> RF Output
              ^                        ^
              |                        |
     [ PN Code Generator ]        [ Local Oscillator fc ]

DSSS RECEIVER:
RF Input ===> [ BPSK Demodulator ] ---> [ x ] ---> [ Integrator / LPF ] ---> Data Out
                                         ^
                                         |
                              [ Synchronized PN Gen ]

Frequency Hopping Spread Spectrum (FHSS) Operation and Block Diagram: In Frequency Hopping Spread Spectrum (FHSS), the total allocated bandwidth is divided into contiguous frequency channels. The carrier frequency of the transmitted signal does not remain constant; instead, it rapidly hops from one channel to another in a pseudorandom sequence:

  1. Transmission Mechanism:
    • Baseband digital data modulates a fixed intermediate frequency (IF) carrier using standard M-ary FSK or BPSK.
    • A PN code generator periodically outputs -bit words ( channels) that drive a Frequency Synthesizer.
    • The synthesizer generates a hopping carrier frequency , which upconverts the modulated data signal into one of the frequency slots for a duration called the dwell time .
    • Fast FHSS: The carrier hops multiple times during a single data bit period ().
    • Slow FHSS: Multiple data bits are transmitted per frequency hop ().
  2. Reception Mechanism (Dehopping):
    • The receiver utilizes an identical, synchronized PN generator and frequency synthesizer to produce the matching hopping carrier, dehopping the received signal back down to the fixed IF stage for demodulation.
FHSS TRANSMITTER:
Data in ---> [ FSK Modulator ] ---> [ Mixer ] ==========================> RF Output
                                       ^
                                       | (Hopping Carrier f_hop)
                             [ Frequency Synthesizer ]
                                       ^
                                       |
                             [ PN Code Generator ]

FHSS RECEIVER:
RF In =====> [ Mixer ] -----------> [ Bandpass Filter / Demodulator ] ---> Data Out
               ^
               | (Synchronized Hopping Carrier)
     [ Frequency Synthesizer ]
               ^
               |
     [ Synchronized PN Gen ]
Answer:

All past exam questions for Data Communication