PadhaikoAll subjects

Digital data, analog signal: ASK, FSK, PSK, QPSK, QAM

Data Communication (ENCT 253)

Open in the Padhaiko app

4.3 Digital Data, Analog Signal: ASK, FSK, PSK, QPSK, QAM

Digital-to-analog modulation—traditionally referred to as keying—is the technique of representing discrete digital data (bits) by modulating the parameters of a continuous sinusoidal carrier wave. Keying is essential whenever digital data must be transmitted over analog bandpass media, including telephone subscriber lines, wireless radio channels, satellite transponders, and cable television networks.

Definition

Keying, Baud Rate, and Bit Rate

Keying modulates a sinusoidal carrier by selecting discrete values of amplitude , frequency , or phase in response to digital input symbols:

Amplitude Shift Keying (ASK)

Definition

Amplitude Shift Keying (ASK / OOK)

In Amplitude Shift Keying (ASK), the amplitude of the high-frequency carrier varies between discrete levels proportional to the digital data, while carrier frequency and phase remain fixed.

In the simplest form, Binary ASK (BASK) or On-Off Keying (OOK), a binary 1 is represented by the presence of the carrier and a binary 0 by the absence of the carrier:

Generation and Constellation of ASK

Digital Bit Stream  ---+
(Unipolar NRZ)         |
                       v
                 [ Multiplier ] ---> BASK Output Signal
                       ^
                       |
Carrier Oscillator ----+
A cos(2*pi*fc*t)
  1. Modulator Circuit: An incoming unipolar NRZ bit stream ( for bit 1, for bit 0) is directly multiplied by an analog carrier wave using a balanced product modulator or analog gate switch.
  2. Constellation Diagram: The constellation diagram plots the signal elements on the In-phase () and Quadrature () axes. In BASK, both points lie entirely on the -axis: one point at representing bit 0, and one point at representing bit 1.
  3. Bandwidth: The transmission bandwidth is:
  1. Characteristics: ASK circuitry is simple and inexpensive. However, because additive channel noise directly distorts signal amplitude, ASK exhibits poor noise immunity and is highly vulnerable to channel fading.

Frequency Shift Keying (FSK)

Definition

Frequency Shift Keying (FSK)

In Frequency Shift Keying (FSK), the frequency of the carrier is switched between discrete predefined values according to the digital data, while amplitude and phase remain constant.

In Binary FSK (BFSK), two distinct frequencies (mark frequency) and (space frequency) represent bit 1 and bit 0 respectively:

where and , with carrier separation .

Generation and Constellation of FSK

                  +---> [ BPF at f1 ] ---+
                  |                      |
Bit Stream ---> [ VCO ]                  +---> BFSK Output
                  |                      |
                  +---> [ BPF at f2 ] ---+
  1. Modulator Circuit: BFSK is generated either by feeding the digital data into a Voltage-Controlled Oscillator (VCO) to shift frequency continuously (Continuous-Phase FSK), or by switching between two independent crystal oscillator sources at frequencies and .
  2. Bandwidth: BFSK requires wider bandwidth than ASK or BPSK because it accommodates two distinct carrier frequencies separated by :
  1. Constellation Diagram: Because BFSK signals at frequencies and are orthogonal over the bit interval , they are represented on two orthogonal coordinate axes in a two-dimensional signal space.
  2. Characteristics: Because the envelope is strictly constant (), amplitude limiters in the receiver remove amplitude noise before detection, providing superior noise immunity compared to ASK.

Phase Shift Keying (PSK)

Definition

Binary Phase Shift Keying (BPSK)

In Phase Shift Keying (PSK), the phase of the carrier is shifted between discrete values to represent digital bits, while amplitude and frequency remain constant.

In Binary PSK (BPSK), two opposite phases separated by () represent bits 1 and 0:

Generation and Constellation of BPSK

Bipolar NRZ Data     ---+
(+1 V for 1, -1 V for 0)|
                        v
                  [ Balanced Modulator ] ---> BPSK Output
                        ^
                        |
Carrier Oscillator -----+
A cos(2*pi*fc*t)
  1. Modulator Circuit: The incoming binary bit stream is converted into a bipolar NRZ voltage waveform . This bipolar stream is multiplied with carrier using a balanced product modulator.
  2. Constellation Diagram: The BPSK constellation consists of two points on the -axis symmetrically spaced about the origin: for bit 1 and for bit 0. The distance between the points is , providing maximum noise margin.
  3. Bandwidth: The transmission bandwidth of BPSK is identical to ASK:

Differential PSK (DPSK)

Standard BPSK requires coherent carrier recovery; an inverted phase lock at the receiver inverts all received data bits. Differential Phase Shift Keying (DPSK) overcomes this ambiguity by encoding data into phase transitions rather than absolute phase levels:

Quadrature Phase Shift Keying (QPSK)

Definition

Quadrature Phase Shift Keying (QPSK)

Quadrature Phase Shift Keying (QPSK) is a 4-ary digital modulation technique where two successive bits (a dibit) are grouped to form one transmission symbol (, ).

Each of the four possible dibit combinations (00, 01, 11, 10) selects one of four orthogonal carrier phase shifts spaced by ():

Expanding using the cosine angle-sum formula:

where is the In-Phase component and is the Quadrature component.

QPSK Modulator Block Diagram

                 +---> [ In-Phase Bipolar I(t) ] ---> [ Multiplier ] ---+
                 |                                          ^            |
                 |                                          |            v
Bit Stream ---> [ S/P ]                                cos(2*pi*fc*t)  [ + ] ---> QPSK Output
(Rate Rb)        |                                          |            ^
                 |                                    [-90° Shift]       |
                 |                                          v            |
                 +---> [ Quadrature Bipolar Q(t) ] -> [ Multiplier ] ---+
                                                            ^
                                                            |
                                                       sin(2*pi*fc*t)
  1. Serial-to-Parallel Converter (S/P): Splits the input serial bit stream of rate into two parallel streams: the in-phase channel (even bits) and the quadrature channel (odd bits), each operating at half the bit rate ().
  2. Quadrature Carriers: The carrier oscillator supplies to the -multiplier and passes through a phase shifter to supply to the -multiplier.
  3. Summer: The two modulated subcarriers are summed to generate the composite QPSK signal.
  4. Constellation Diagram: The four points lie symmetrically in the four quadrants of the - plane at coordinates :
    • 00: at
    • 01: at
    • 11: at
    • 10: at
  5. Bandwidth Advantage: Because the baud rate is halved (), the required transmission bandwidth is:

QPSK transmits twice as much data as BPSK in the exact same channel bandwidth, achieving a spectral efficiency of up to .

Quadrature Amplitude Modulation (QAM)

Definition

Quadrature Amplitude Modulation (QAM)

Quadrature Amplitude Modulation (QAM) is a hybrid modulation scheme that simultaneously modulates both the amplitude and the phase of two orthogonal carrier waves ( and ).

The general continuous-time waveform of a QAM signal is:

where and are multi-level discrete amplitude signals derived from the input data stream.

QAM Transmitter Block Diagram

                 +---> [ 2-to-L D/A Conv ] ---> [ Multiplier ] ---+
                 |            d_I(t)                  ^            |
                 |                                    |            v
Data Bits -----> [ S/P ]                         cos(2*pi*fc*t)  [ + ] ---> QAM Output
(k bits/symbol)  |                                    |            ^
                 |                              [-90° Shift]       |
                 |                                    v            |
                 +---> [ 2-to-L D/A Conv ] ---> [ Multiplier ] ---+
                              d_Q(t)                  ^
                                                      |
                                                 sin(2*pi*fc*t)

Signal Constellation Diagrams for QAM

A constellation diagram plots the valid complex envelope coordinates for each symbol in the alphabet:

  1. 8-QAM (, ): Encodes 3 bits per baud. Can be arranged as two concentric circles with 4 phase points each, or on a rectangular grid. Baud rate is .
  2. 16-QAM (, ): A symmetric square lattice of points. Both and take one of four discrete voltage levels: .
    • Quadrant I contains 4 points: normalized to .
    • Quadrants II, III, and IV contain the symmetric reflections.
    • Baud rate is , achieving high spectral efficiency ().
  3. 64-QAM (, ): An grid of 64 points with coordinate levels along both axes. Widely deployed in Wi-Fi (802.11n/ac) and cable modems (DOCSIS). Baud rate is .
Constellation Size, Symbol Rate, and Spectral Efficiency
Modulation SchemeBits / Symbol ()Constellation Size ()Baud Rate ()Bandwidth ()Peak Spectral Efficiency
BASK / BPSK12
QPSK24
8-QAM / 8-PSK38
16-QAM416
64-QAM664

Eye Diagram

Definition

Eye Diagram (Eye Pattern)

An Eye Diagram (or eye pattern) is an experimental oscilloscope display used to evaluate the signal integrity and transmission quality of a digital transmission link. It is generated by feeding the demodulated received baseband pulse stream to the vertical input of an oscilloscope while triggering the horizontal sweep with the master symbol clock at the symbol rate .

The persistence of the display superimposes all possible symbol transitions (0-to-0, 0-to-1, 1-to-0, 1-to-1), creating the visual appearance of an open human eye.

Diagnostic Parameters of an Eye Diagram

Voltage
   ^           +-------------------------------+   <-- Peak Signal Level (+Vp)
   |          / \                             / \
   |         /   \     Eye Opening Width     /   \
   |        /     +-------------------------+     \
   |       /      |                         |      \
   |      /       |    Eye Opening Height   |       \
   |     /        |    (Noise Margin)       |        \
   0 ----X--------+-------------------------+---------X---> Time
   |      \                                          /     (Zero-Crossing Jitter)
   |       \                                        /
   |        \                                      /
   v         +------------------------------------+   <-- Negative Peak (-Vp)
  1. Eye Opening Height: The vertical opening at the optimal decision sampling instant measures the noise margin of the system. An open height of indicates the maximum additive noise voltage that the signal can tolerate before bit errors occur. If inter-symbol interference (ISI) is severe, the eye closes completely vertically.
  2. Eye Opening Width: The horizontal interval over which the eye remains open indicates the timing margin. It shows the time window during which the receiver can sample the waveform without incurring errors due to timing offsets.
  3. Slope of the Eye (Sensitivity to Timing Jitter): The rate of closure of the eye (slope of the signal traces passing through the decision boundary) measures how sensitively the noise margin degrades as sampling time deviates from the ideal instant. A steeper slope implies high vulnerability to timing jitter.
  4. Zero-Crossing Jitter: The horizontal thickness of the trace bundle crossing the zero-voltage decision threshold quantifies clock jitter and phase noise in the transmission medium.
  5. Top/Bottom Trace Thickness: The width of the signal boundary at the sampling instant indicates the degree of Inter-Symbol Interference (ISI) introduced by channel bandlimiting.
Comparison of Digital Modulation Techniques
CharacteristicASKFSKBPSKQPSK16-QAM
Bits / Symbol ()11124
Baud Rate ()
Bandwidth EfficiencyLow ()Lowest ()Low ()Moderate ()High ()
Noise ImmunityPoorGoodExcellentExcellentModerate (points closer)
Constant Envelope?NoYesYesYes (filtered: minor)No (multi-amplitude)
Transceiver ComplexityVery simpleSimpleModerateModerateHigh

Worked Examples

Example 4.5

4.5

A digital communication system transmits data at a bit rate of . The transmission filter has a raised-cosine roll-off factor of . Calculate the required transmission bandwidth for:

  1. Binary Amplitude Shift Keying (BASK).
  2. Binary Phase Shift Keying (BPSK).
  3. Quadrature Phase Shift Keying (QPSK).
  4. Binary Frequency Shift Keying (BFSK) with tone separation of .

Evaluating BASK and BPSK Bandwidths: For BASK and BPSK, each symbol conveys bit (). The signaling rate is:

Applying the transmission bandwidth formula:

Evaluating QPSK Bandwidth: For QPSK, each symbol conveys bits (). The signaling rate is halved:

Applying the bandwidth formula:

Notice that QPSK occupies exactly half the bandwidth of BPSK at identical bit rate.

Evaluating BFSK Bandwidth: For BFSK with tone spacing :

Answer:

Bandwidths: BASK , BPSK , QPSK , and BFSK .

Example 4.6

4.6

A high-speed digital microwave link must support a bit rate of . The channel uses raised-cosine pulse shaping with roll-off factor .

  1. If 16-QAM modulation is used, compute the baud rate , the required channel bandwidth , and the spectral efficiency in .
  2. If the modulation is upgraded to 64-QAM, calculate the new baud rate , the new required bandwidth , and the percentage bandwidth savings.

Analyzing 16-QAM System: In 16-QAM, each constellation point encodes bits per symbol. The signaling rate is:

The required transmission bandwidth is:

The spectral efficiency is:

Analyzing 64-QAM System: In 64-QAM, each constellation point encodes bits per symbol. The new signaling rate is:

The new required channel bandwidth is:

Calculating Bandwidth Savings: The reduction in required bandwidth by upgrading to 64-QAM is:

Answer:

For 16-QAM: baud rate , bandwidth , spectral efficiency . For 64-QAM: baud rate , bandwidth , achieving a bandwidth saving.

Example 4.7

4.7

An oscilloscope monitoring the eye diagram of a baseband binary data stream with nominal peak voltage and bit period reveals:

Calculate:

  1. The noise margin percentage relative to peak signal voltage.
  2. The timing jitter width and timing jitter percentage relative to the bit interval.
  3. The transmission bit rate .

Calculating Noise Margin: The eye opening height measures the maximum noise voltage amplitude tolerated before threshold decision errors occur:

This indicates that the signal retains of its nominal amplitude margin against additive noise, with degraded by intersymbol interference.

Calculating Timing Jitter: The horizontal narrowing of the eye opening is caused by clock and zero-crossing jitter:

Expressed as a percentage of the bit interval:

Determining Bit Rate: With bit period :

Answer:

Noise margin , timing jitter ( of bit period), and transmission bit rate .

Exercises

Exercises

Question 1

Define baud rate and bit rate. Contrast the two terms mathematically and explain why QPSK achieves twice the bit rate of BPSK for a given channel bandwidth.

Mathematical Distinction:

  • Bit Rate (): The rate of binary data transfer across the physical channel in bits per second (bps). It quantifies the net information throughput.
  • Baud Rate (): The signaling rate of discrete symbol transitions per second (symbols/s or baud). It quantifies the physical switching speed of the modulated carrier.

The fundamental relationship is , where is the alphabet size.

Comparison Between BPSK and QPSK:

  • For BPSK, each symbol represents states, so . Hence, .
  • For QPSK, each symbol represents states (a dibit: 00, 01, 11, 10), so . Hence, .

Because channel transmission bandwidth is proportional to the baud rate (), QPSK halves the symbol rate for a fixed bit rate . Conversely, within a fixed channel bandwidth , QPSK can transmit at twice the bit rate of BPSK ().

Answer:

Bit rate (, bps) measures information transfer rate, while baud rate (, baud) measures physical symbol transition rate (). QPSK encodes 2 bits per symbol (), halving the baud rate relative to BPSK and thus transmitting twice the bit rate within identical channel bandwidth.

Question 2

Explain the working principle of Quadrature Phase Shift Keying (QPSK). Draw its transmitter block diagram and write the mathematical expressions for the in-phase and quadrature components.

Working Principle of QPSK: QPSK divides an input serial binary bit stream of rate into pairs of bits called dibits (00, 01, 11, 10). Each dibit modulates one of four carrier phases separated by :

where and .

Modulator Block Diagram:

  1. A serial-to-parallel converter demultiplexes the input bit stream into an in-phase stream and a quadrature stream at rate .
  2. The stream multiplies an in-phase carrier .
  3. The stream multiplies a quadrature carrier obtained via a phase shift network.
  4. The outputs are summed together to generate the composite QPSK bandpass signal.
Answer:

QPSK groups bits into dibits to modulate two orthogonal carriers ( and ). The transmitter consists of a serial-to-parallel converter, a local oscillator with a phase shifter, two balanced product modulators, and an analog summer. Output: .

Question 3

Draw and describe the signal constellation diagrams for BPSK, QPSK, and 16-QAM. State the number of bits encoded per symbol and the coordinate positions for each.

BPSK Constellation:

  • Encodes ().
  • Two points located on the In-phase axis: representing bit 1 and representing bit 0. Angle separation is .

QPSK Constellation:

  • Encodes ().
  • Four points distributed symmetrically in the four quadrants of the - plane at coordinates : 00 at (), 01 at (), 11 at (), and 10 at ().

16-QAM Constellation:

  • Encodes ().
  • A rectangular grid of 16 constellation points. With step size , coordinates take values . This configuration provides 3 distinct amplitude levels and 12 distinct phase angles.
Answer:

BPSK: 1 bit/symbol, 2 points on -axis at . QPSK: 2 bits/symbol, 4 points at . 16-QAM: 4 bits/symbol, a square grid of 16 points at normalized coordinates.

Question 4

A telephone bandpass channel spanning from to (bandwidth ) is used to transmit digital data using 16-QAM. The pulse shaping filter has a roll-off factor of . Calculate:

  1. Maximum permissible baud rate .
  2. Maximum bit rate that can be supported by the channel.

Evaluating Permissible Baud Rate: Given available transmission bandwidth and roll-off factor :

Calculating Maximum Supported Bit Rate: In 16-QAM, , which yields . The maximum supported bit rate is:

Answer:

Maximum permissible baud rate . Maximum supported bit rate .

Question 5

What is an eye diagram? Describe how it is obtained on an oscilloscope, and explain what each of the following indicates: (1) eye height, (2) eye width, (3) slope of eye closure, and (4) zero-crossing jitter.

Principle and Generation of Eye Diagram: An eye diagram is an experimental tool for evaluating digital transmission line quality and ISI. It is generated by applying the received baseband signal to the vertical deflecting plates of an oscilloscope while triggering the horizontal sweep with the recovered symbol clock at the symbol period . The persistence of the oscilloscope screen superimposes all possible symbol transitions (0-0, 0-1, 1-0, 1-1) over one or two symbol intervals, forming an eye shape.

Interpretation of Diagnostic Metrics:

  1. Eye Height: Vertical opening at the optimal decision sampling instant measures the system's noise margin. The higher the opening, the greater the immunity to additive channel noise.
  2. Eye Width: Horizontal open interval indicates the timing margin over which the signal can be sampled without errors caused by inter-symbol interference.
  3. Slope of Eye Closure: The steepness of the signal trajectories passing through the threshold level reveals sensitivity to timing error; steeper slopes mean small timing jitters cause rapid degradation of the noise margin.
  4. Zero-Crossing Jitter: The horizontal spread of the waveform transitions across the zero-crossing boundary quantifies clock and phase jitter.
Answer:

An eye diagram is formed by superimposing synchronized baseband symbol transitions on an oscilloscope. Eye height measures noise margin, eye width measures timing error margin without ISI, slope indicates sensitivity to timing error, and horizontal thickness at zero-crossing indicates clock jitter.

Question 6

Compare ASK, FSK, BPSK, QPSK, and 16-QAM in terms of power efficiency (noise immunity), bandwidth efficiency, and receiver implementation complexity.

Power Efficiency (Noise Immunity):

  • BPSK and QPSK: Offer the highest power efficiency. Their antipodal/quadrature signal geometries maximize the Euclidean distance between constellation points for a given average signal energy (), delivering the lowest bit error rate (BER).
  • BFSK: Good noise immunity because the envelope is constant, enabling amplitude limiting. However, it requires higher than BPSK for identical BER.
  • 16-QAM: Moderate power efficiency. Because 16 points are packed into the same peak power space, Euclidean distance between adjacent points shrinks, requiring higher than QPSK to prevent errors.
  • ASK: Poorest power efficiency because additive noise directly distorts the amplitude decision threshold.

Bandwidth Efficiency and Hardware Complexity:

  • Bandwidth Efficiency: 16-QAM () QPSK () BPSK/ASK () FSK ().
  • Hardware Complexity: ASK is simplest (envelope diode detector). FSK is low-to-moderate. BPSK/QPSK require coherent carrier recovery (Costas loop or squaring loop). 16-QAM is the most complex, requiring multi-level D/A and A/D converters, linear RF power amplifiers, and precise adaptive channel equalization.
Answer:

BPSK and QPSK provide the best noise immunity; 16-QAM provides the highest bandwidth efficiency () at the expense of requiring higher SNR; ASK has poorest noise immunity; and transceiver complexity increases from ASK (simplest) to 16-QAM (most complex).

Past exam questions for Data Communication

← Analog data, analog signals: Modulation and its need, AM, FM, PM ·…Digital data, digital signal: RZ, NRZ, AMI, Manchester, differential… →