PadhaikoAll subjects

Past exam question: Assignment 3, Q4(a)

Instrumentation · 2 marks

Open in the Padhaiko app

Topic: Microprocessor and microcontroller and their selection criteria, and…

Question

8255 PPI is mapped at base address of 7F00H using memory mapped I/O is used to control operation of lathe. The microcomputer reads instruction code from tape reader on handshake basis and sends appropriate control words to lathe. a) What are the address captured by 8255?

Solution

Register Selection with Base Address 7F00H: In memory-mapped I/O, the 8085 uses 16-bit memory addresses () with . The base address 7F00H corresponds to:

The lowest two address lines and connect directly to pins and of the 8255 PPI to select its four internal locations:

Internal RegisterHex Address
Port A7F00H
Port B7F01H
Port C7F02H
Control Word Register (CWR)7F03H
Answer:

With full 16-bit memory-mapped decoding at base address 7F00H, the four addresses captured by the 8255 PPI are:

All past exam questions for Instrumentation