PadhaikoAll subjects

Electric Field (part 2: 2.7–2.11)

Electromagnetics (ENEX 254)

Open in the Padhaiko app

2.7 Energy density in electrostatic field

Assembling a distribution of stationary electric charges requires work against the mutual repulsive electrostatic forces between like charges. This expenditure of mechanical work is stored in the surrounding electric field as electrostatic potential energy ().

Energy of Discrete and Continuous Charge Distributions

Definition

Electrostatic Potential Energy and Energy Density

  1. Discrete Point Charges: The total work required to bring point charges from infinity to their respective positions is:

where is the total electric potential at the position of produced by all other charges except .

  1. Continuous Volume Charge Distribution:
  1. Field Formulation of Stored Energy: Using and vector identity , and applying the divergence theorem over all space:
  1. Electrostatic Energy Density (): The electrostatic energy stored per unit volume of the field is:

2.8 Electric properties of material medium

Under the influence of an applied electric field, physical materials exhibit distinct macroscopic electromagnetic behaviors based on the availability and mobility of charge carriers:

Classification of Electrical Materials
Material ClassCharge Carrier NatureTypical Conductivity ()Response to Electrostatic Field
Conductors (e.g., Cu, Al, Ag, Au)Abundant free conduction electrons ()High ()In static equilibrium, and inside; all excess charge resides strictly on the outer surface.
Dielectrics / Insulators (e.g., Mica, Glass, Teflon, Quartz)Bound valence electrons tightly held to atomic nucleiExtremely low ()Undergoes molecular/electronic polarization; electric field penetrates throughout the volume.
Semiconductors (e.g., Si, Ge, GaAs)Moderate electron-hole pairs governed by thermal energy and dopingIntermediate ()Field behavior depends on carrier injection, depletion regions, and temperature.

2.9 Free and bound charges, polarization, relative permittivity, electric dipole electric boundary conditions

Electric Dipole

Definition

Electric Dipole and Dipole Moment

An electric dipole consists of two equal and opposite point charges and separated by a small vector distance directed from to :

Polarization and Bound Charges

When an external electric field is applied to a dielectric material, the positive nuclei shift slightly along and the electron clouds shift opposite to , creating microscopic induced dipoles.

Definition

Polarization Vector and Bound Charges

  1. Polarization Vector (): The dipole moment per unit volume of the dielectric:
  1. Bound (Polarization) Charge Densities:
    • Bound Volume Charge Density ():

where is the outward unit normal to the dielectric boundary.

  1. Electric Susceptibility and Relative Permittivity: For a linear, isotropic dielectric:

where is the electric susceptibility and is the relative permittivity (dielectric constant).

Electrostatic Boundary Conditions

At an interface between two different media, the Maxwell field equations impose boundary conditions:

Theorem

Electrostatic Boundary Conditions

Let be the unit normal directed from medium 1 into medium 2:

  1. Tangential Electric Field Condition (from ): The tangential component of electric field intensity is continuous across any interface:

In terms of displacement: .

  1. Normal Displacement Flux Condition (from ): The normal component of electric flux density is discontinuous by the free surface charge density :
  1. Law of Refraction for Field Lines (for ):
  1. Conductor–Dielectric Boundary: Inside a static perfect conductor: , . At the outer surface:

2.10 Current, current density, conservation of charge, continuity equation, relaxation time

Conduction and Convection Currents

Electric current represents the time rate of flow of electric charge:

Definition

Current Density and Point Form of Ohm's Law

where is the electrical conductivity of the conductor in Siemens per meter ().

Conservation of Charge and Continuity Equation

Theorem

Continuity Equation (Law of Conservation of Charge)

Because electric charge can neither be created nor destroyed, the net outward current leaving a closed boundary surface must equal the rate of decrease of the charge enclosed within volume :

Applying the divergence theorem to the left-hand side:

For steady (direct current, DC) conditions, charge distribution is time-invariant ():

Relaxation Time ()

In a homogeneous, isotropic conductor of conductivity and permittivity :

Substituting into the continuity equation:

Solving this first-order differential equation yields:

Definition

Relaxation Time ()

The relaxation time is the time required for any initial internal charge imbalance placed inside a conductor to decay to () of its initial value by migrating to the exterior boundary surface.

The charge relocation to the surface is virtually instantaneous.


2.11 Boundary value problems, Laplace and Poisson equations and their solutions, uniqueness theorem

When charge distributions are not known in advance (such as in electrodes held at fixed potentials), we solve second-order partial differential equations for the potential .

Poisson's and Laplace's Equations

Starting from Gauss's law in differential form:

Substituting into an isotropic, homogeneous medium where is spatially constant:

In a charge-free dielectric region ():

Theorem

Uniqueness Theorem

The Uniqueness Theorem states that if a solution to Poisson's (or Laplace's) equation satisfies the prescribed boundary conditions over a closed boundary surface, then that solution is the unique (only) possible solution.

One-Dimensional Solutions to Laplace's Equation

Solutions to Laplace's Equation in Symmetric 1D Systems
System GeometryGoverning EquationGeneral Solution Electric Field
Parallel Plates (variation with )
Coaxial Cylinders (variation with )
Concentric Spheres (variation with )

Worked Examples

Example 2.4

2.4

The plane separates two dielectric media. Region 1 () has and Region 2 () has . The interface is charge-free (). If the electric field in Region 1 is :

  1. Find and its magnitude in Region 2.
  2. Determine the angles and that the fields make with the interface normal .
  3. Compute the polarization vector in Region 1.

Decomposing into normal and tangential components: The unit normal pointing from Region 2 into Region 1 is .

Applying boundary conditions at :

  1. Tangential continuity:
  1. Normal displacement continuity ():

Thus:

Its magnitude is:

Evaluating the refraction angles: The tangential magnitude in both media is .

Notice that , confirming the law of refraction.

Evaluating polarization vector :

Using :

Answer:
  1. , with magnitude .
  2. Refraction angles: and .
  3. .
Example 2.5

2.5

A coaxial cable consists of an inner conductor of radius at potential and an outer conductor of inner radius grounded at . The intervening space is filled with a dielectric of relative permittivity .

  1. Solve Laplace's equation to obtain the potential distribution and electric field .
  2. Calculate the maximum electric field in the dielectric.
  3. Compute the capacitance per unit length and the stored electrostatic energy per meter.

Solving Laplace's equation in cylindrical coordinates: Because depends solely on radius :

Integrating once:

Integrating a second time:

Applying boundary conditions: At outer grounded conductor :

At inner conductor :

Thus:

Evaluating electric field and maximum field intensity:

The electric field is inversely proportional to , so its maximum occurs at the inner conductor surface :

Computing capacitance and stored energy per meter: The capacitance per unit length of a coaxial cable is:

The electrostatic energy stored per meter is:

Answer:
  1. and .
  2. Maximum field: .
  3. Capacitance: ; stored energy: .
Example 2.6

2.6

  1. Compute the relaxation time for (a) copper (, ) and (b) sea water (, ).
  2. A direct current of flows through a cylindrical copper wire of radius . Find the current density , the internal electric field , and the ohmic power dissipated per meter length of the wire.

Calculating relaxation times:

  • Copper:
  • Sea Water:

Evaluating current density and electric field in the copper wire: Cross-sectional area of the wire:

The current density is:

By Ohm's law :

Evaluating power dissipated per unit length: Resistance per meter:

Power dissipated per meter:

Answer:
  1. Relaxation times: copper ; sea water .
  2. Wire parameters: , , and power dissipated .

Exercises

Exercise — Dielectric Materials, Boundary Conditions, and Laplace's Equation

Question 1

The plane forms the boundary between Medium 1 (, ) and Medium 2 (, ). The interface is charge-free (). In Medium 1, the electric flux density is .

  1. Find and its magnitude in Medium 2.
  2. Determine the angle that makes with the interface normal .

Decomposing into normal and tangential components: The normal direction is :

Applying boundary conditions at :

  1. Normal continuity ():
  1. Tangential electric field continuity:

Thus:

Its magnitude is:

Calculating angle with normal : The tangential magnitude is .

Answer:
  1. , with magnitude .
  2. Angle .
Question 2

A 1D semiconductor junction between and carries a space charge density . Using Poisson's equation, determine the potential distribution and electric field subject to the boundary conditions and .

Setting up and integrating Poisson's equation:

Integrating once:

Integrating a second time:

Applying boundary conditions to determine constants and : At :

At :

Adding (1) and (2):

Subtracting (2) from (1):

Writing final expressions for and :

Answer:
Question 3

A cylindrical capacitor of length has inner radius and outer radius . The space between cylinders is filled with a dielectric of relative permittivity . If a potential difference of is applied:

  1. Calculate the total capacitance of the structure.
  2. Determine the total stored electrostatic energy .

Evaluating the capacitance : The capacitance of a coaxial cylinder of length is:

Substituting , , , and :

Evaluating total stored electrostatic energy :

Answer:
  1. Capacitance: .
  2. Stored energy: ().
Question 4

A dielectric material with relative permittivity and conductivity has an initial charge distribution with volume charge density introduced into its interior at time .

  1. Calculate the relaxation time of the material.
  2. Determine the volume charge density remaining in the interior at time .

Evaluating relaxation time :

Calculating remaining charge density at : By the charge relaxation law:

At :

Answer:
  1. Relaxation time: .
  2. Charge density at : ().
Question 5

State and prove the Uniqueness Theorem for electrostatic boundary value problems governed by Poisson's equation with Dirichlet boundary conditions.

Statement and hypothesis of two distinct solutions:

  • Statement: The solution to Poisson's equation inside a closed volume bounded by surface , with potential specified on the boundary ( on ), is unique.
  • Proof: Suppose for the sake of contradiction that two different potential functions and both satisfy Poisson's equation throughout and satisfy identical boundary conditions on :

Defining the difference potential : Define the difference function . Then, in volume :

Thus satisfies Laplace's equation throughout . On the boundary surface :

Applying vector identity and divergence theorem: Consider the vector identity:

Because , this simplifies to:

Integrating both sides over the volume and applying the divergence theorem:

Because on the entire boundary surface , the surface integral is identically zero:

Conclusion of uniqueness: The integrand is strictly non-negative. An integral of a non-negative continuous function can equal zero if and only if the integrand vanishes everywhere:

This implies throughout . Because on the boundary , the constant must be zero:

Therefore, the solution is strictly unique.

Answer:

The Uniqueness Theorem is proven: if two potentials satisfy Poisson's equation with identical Dirichlet boundary values , their difference must be identically zero throughout , proving .

← Electric Field (part 1: 2.1–2.6)Magnetic Field (part 1: 3.1–3.5) →