PadhaikoAll subjects

Optics (part 2: 4.4–4.6)

Engineering Physics (ENSH 102)

Open in the Padhaiko app

4.4 Polarization

Light is a transverse electromagnetic wave. In unpolarized light the electric vector vibrates in all directions perpendicular to the ray; in plane polarized light it vibrates in a single plane. A polarizer transmits only one component, and by Malus's law an analyser at angle to the polarizer transmits

Unpolarized light passing through an ideal polarizer loses half its intensity ().

4.4.1 Introduction: double refraction and the Nicol prism (construction and uses)

Definition

Double Refraction (Birefringence)

When a ray enters a calcite crystal it splits into two plane-polarized rays with mutually perpendicular vibrations:

For calcite and (negative crystal, ) at . The optic axis is the direction along which both rays travel at the same speed.

Nicol prism. A calcite crystal about three times as long as it is wide is cut into two halves along a diagonal plane, whose faces are polished and cemented with a thin layer of Canada balsam (, between and ). The end faces are cut so the angle is instead of .

Uses: to produce and analyse plane polarized light (two Nicols, polarizer and analyser), in polarimeters and saccharimeters, and in petrographic microscopes.

Limitations of the Nicol Prism
LimitationReason
Small field of viewRays must hit the balsam at angles near the critical angle
Cannot be used for ultravioletCanada balsam absorbs ultraviolet
Expensive and bulkyNeeds a large, flawless calcite crystal

4.4.2 Retardation plates; plane, circular and elliptical polarization

A retardation plate is a thin slice of a birefringent crystal cut parallel to the optic axis. Plane polarized light entering normally splits into an O- and an E-component that travel in the same direction at different speeds, so a phase difference builds up.

Definition

Quarter and Half Wave Plates

For thickness the optical path difference is and the phase difference is

Mathematical treatment. Let plane polarized light of amplitude make angle with the optic axis. After entering the plate, the components are

Eliminating gives the general ellipse

Polarization Produced for Different Phase Differences
ConditionResult
or Plane polarized light (line )
and ()Circularly polarized light ()
and Elliptically polarized light with axes along the optic axis
Any other Elliptically polarized light, tilted ellipse

A half-wave plate rotates the plane of polarization through ; a quarter-wave plate converts plane polarized light at to circular light, and circular to plane.

4.4.3 Optical activity and specific rotation

A substance is optically active if it rotates the plane of polarization of light passing through it: dextrorotatory if the rotation is clockwise looking towards the source, laevorotatory if anticlockwise. Examples are quartz, sugar solution and turpentine.

Definition

Specific Rotation

The specific rotation at a given temperature and wavelength is the rotation produced by a tube long containing of the active substance:

with the observed rotation (degrees), the length in decimetres and the concentration in . The unknown concentration of a sugar solution is found by measuring with a polarimeter.

Example 4.5

4.5

(a) Calculate the minimum thickness of a calcite quarter-wave plate and half-wave plate for (, ). (b) A tube containing of sugar per of solution rotates the plane of polarization by . Find the specific rotation.

(a) Wave plates: .

(b) Specific rotation: .

Answer:

(a) and ; (b) .


4.5 Laser

4.5.1 Introduction: laser and ordinary light; properties of laser

LASER stands for Light Amplification by Stimulated Emission of Radiation.

AspectOrdinary lightLaser light
CoherenceIncoherent (random phases)Highly coherent in time and space
MonochromaticityMany wavelengthsAlmost single wavelength
DirectionalitySpreads in all directionsNarrow beam, very small divergence
IntensityFalls quickly with distanceVery high, concentrated in a tiny spot
EmissionMostly spontaneousStimulated

4.5.2 Absorption, spontaneous and stimulated emission, active medium, population inversion, metastable state

Consider two energy levels with .

Definition

Absorption and Emission Processes

At thermal equilibrium the populations follow the Boltzmann law

so absorption beats stimulated emission and light is attenuated, not amplified.

An optical resonator (two mirrors, one partly transmitting) feeds the stimulated photons back through the medium so the beam grows until it leaves through the partial mirror.

4.5.3 Pumping

Pumping is the process that raises atoms to the excited levels to achieve population inversion.

Types of Pumping
TypeMechanismExample
OpticalAbsorbing light from a flash lampRuby laser
ElectricalElectron collisions in an electric dischargeHe-Ne, argon-ion laser
ChemicalEnergy released in an exothermic chemical reactionHF chemical laser
ThermalHeating the medium to a high temperatureGas-dynamic laser

4.5.4 He-Ne laser and semiconductor laser

He-Ne laser. A glass tube holds helium and neon in the ratio about at a pressure of about , with two mirrors forming the resonator.

Semiconductor (diode) laser. A heavily doped - junction (for example GaAs) is forward biased. Electrons injected into the conduction band and holes in the valence band recombine in the junction region, which acts as the active medium with population inversion at high current. Cleaved faces form the resonator. The wavelength is set by the band gap:

It is compact, efficient and directly modulated by the current.

4.5.5 Uses of laser

Example 4.6

4.6

(a) Find the energy of a photon of the He-Ne laser line () in eV and the ratio at . (b) Find the wavelength emitted by a GaAs diode laser with .

(a) Photon energy and Boltzmann ratio:

This is why the population inversion is impossible at thermal equilibrium and must be produced by pumping.

(b) GaAs diode laser:

Answer:

(a) ; . (b) .


4.6 Fiber optics

4.6.1 Introduction: propagation of light waves

An optical fibre is a thin glass or plastic strand with a core of refractive index surrounded by a cladding of slightly lower index , covered by a protective jacket. Light entering the core at a small angle strikes the core-cladding boundary at an angle larger than the critical angle and undergoes total internal reflection repeatedly, so it propagates along the fibre with very little loss.

4.6.2 Types of optical fiber: step index and graded index

AspectStep-index fibreGraded-index fibre
Core indexUniform, drops abruptly at claddingDecreases gradually from axis to cladding
Ray pathZig-zag by total internal reflectionSmooth curves (refraction)
Pulse dispersionLarger (modal dispersion)Much smaller
BandwidthLowerHigher
Typical core size to (multimode) or (single mode) to (multimode)

4.6.3 Fiber transmission: single and multimode, self-focusing, acceptance angle and numerical aperture

Definition

Acceptance Angle and Numerical Aperture

A ray from air () entering the core at angle is guided only if it meets the boundary at or beyond the critical angle. The maximum such angle is the acceptance angle, and its sine times is the numerical aperture:

Rays within the cone of half-angle are guided.

4.6.4 Applications

Example 4.7

4.7

A step-index fibre has core index , cladding index and core radius . Find (a) the numerical aperture and acceptance angle, (b) the fractional index difference , and (c) the V number and approximate number of modes at .

(a) Numerical aperture and acceptance angle:

(b) Fractional index difference:

(c) V number and modes:

Answer:

, acceptance angle ; ; with about modes.


Exercises

Practice Exercises — Polarization, Laser and Fibre Optics

Question 1

Describe the construction and working of a Nicol prism. Unpolarized light of intensity passes through two polaroids whose axes are at to each other. Find the transmitted intensity.

Construction and working: A calcite crystal is cut diagonally and the two halves are cemented with Canada balsam (). The ordinary ray () is totally reflected at the balsam layer and absorbed by the blackened face; the extraordinary ray () is transmitted and emerges plane polarized.

Transmitted intensity: The first polaroid passes . By Malus's law the second passes

Answer:

The ordinary ray is eliminated by total internal reflection at the balsam; transmitted intensity .

Question 2

Explain how plane, circular and elliptical polarized light are produced using a retardation plate. State Brewster's law and find the angle of polarization for glass of refractive index .

Polarized light from a retardation plate: Plane polarized light at angle to the optic axis splits into E and O components of amplitudes and with phase difference . A half-wave plate () gives plane polarized light rotated by . A quarter-wave plate () gives circular light if and elliptical light for other .

Brewster's law: Reflected light is completely plane polarized when (reflected and refracted rays are perpendicular).

Answer:

, so .

Question 3

Define specific rotation. A sugar solution of concentration rotates the plane of polarization by in a tube. A second solution in a tube rotates it by . Find the concentration of the second solution.

Specific rotation from the first solution: .

Second concentration:

Answer:

(about per ).

Question 4

Explain spontaneous and stimulated emission, population inversion and pumping. With a neat energy-level description, explain the working of the He-Ne laser and state three uses of lasers.

Emission and inversion: In spontaneous emission an excited atom radiates randomly; in stimulated emission an incident photon induces an identical photon (same phase, frequency, direction). Because at equilibrium, amplification requires population inversion , produced by pumping the atoms to a long-lived metastable level.

He-Ne laser: An electric discharge excites He to metastable levels. By resonant collisions He transfers its energy to the nearly equal level of Ne, creating a population inversion relative to the level. Stimulated emission in the resonator of two mirrors gives red light at .

Uses: Optical-fibre communication, cutting and welding, and eye surgery (also holography and rangefinding).

Answer:

Population inversion by pumping through the He metastable level gives stimulated emission of light in the Ne atoms. Uses: communication, industry, medicine.

Question 5

A fibre has a core of index and cladding of index . Find the numerical aperture, the acceptance angle and the critical angle at the core-cladding boundary. Distinguish between step-index and graded-index fibres.

Numerical aperture and acceptance angle:

Critical angle:

Comparison: In a step-index fibre the core index is uniform and the rays zig-zag by total internal reflection, giving more modal dispersion. In a graded-index fibre the core index falls gradually from the axis, rays follow curved paths and refocus, giving much lower dispersion and higher bandwidth.

Answer:

, acceptance angle , critical angle .

← Optics (part 1: 4.1–4.3)Electrostatics →