PadhaikoAll subjects

Electromagnetism

Engineering Physics (ENSH 102)

Open in the Padhaiko app

6.1 Electromagnetic induction

6.1.1 Faraday's laws

Definition

Faraday's and Lenz's Laws

The magnetic flux through a surface is (unit weber, ).

A conducting rod of length moving with speed perpendicular to a uniform field has motional emf .

6.1.2 Induction and energy transformation

Lenz's law means that mechanical work must be done against the magnetic force to induce a current. If a rod of resistance moves at constant speed in a rail circuit, the current is , the opposing force is , and the power supplied by the agent equals the power dissipated:

Mechanical energy is converted to electrical energy and then to thermal energy. A generator and a transformer are applications.

6.1.3 Induced electric field

A changing magnetic flux also produces an electric field even where there is no conductor. This induced electric field is non-conservative (its field lines close on themselves), and Faraday's law takes the general form

For a long solenoid of circular cross-section with changing at rate in a region of radius , the induced field at distance from the axis is

and the field lines are circles around the axis.

6.1.4 Self-induction and mutual induction

Definition

Self and Mutual Inductance

6.1.5 LR circuit

A coil of inductance and resistance is connected to a battery of emf . Kirchhoff's loop law gives

The time constant is the time for the current to reach of its final value . On removing the battery (shorting the coil) the current decays as .

6.1.6 Energy stored in a magnetic field and energy density

Building up the current from to requires work , which is stored in the magnetic field:

For a solenoid, and , so and the energy density is

a result true for every magnetic field. Compare .

6.1.7 Induced magnetic field: modified Ampere's law and displacement current

Ampere's law fails when charging a capacitor: the surface through the wire and the surface passing between the plates give different results. Maxwell resolved this by adding the displacement current , due to the changing electric flux between the plates.

Theorem

Ampere-Maxwell Law

A changing electric field therefore induces a magnetic field, as a changing magnetic field induces an electric field. For a circular parallel-plate capacitor of radius the induced field at is and at is . The displacement current in the gap equals the conduction current in the wires, so current is continuous.

Example 6.1

6.1

(a) A coil of turns and area is placed with its axis along a field that rises uniformly from to in . Find the emf. (b) A solenoid has turns, length and cross-section . Find its self-inductance. (c) A coil of and is connected to . Find the time constant, the current after and the final energy stored.

(a) Induced emf:

(b) Solenoid inductance:

(c) LR circuit: and .

Answer:

(a) ; (b) ; (c) , , .


6.2 Eddy current

6.2.1 Introduction

When a bulk conductor sits in a changing magnetic field (or moves through a field), circulating currents are induced in the metal. These are eddy currents (Foucault currents). By Lenz's law they oppose the change that causes them, and they dissipate energy as heat ().

6.2.2 Applications: induction cooker, electric guitar, metal detector and eddy-current braking

Applications of Eddy Currents
DeviceWorking principle
Induction cookerA coil below the glass top carries high-frequency AC; the changing flux induces strong eddy currents in the iron or steel pan, heating it directly while the hob stays cool
Electric guitarThe vibrating steel string changes the flux through a pickup coil wound on a magnet, inducing an emf at the string frequency, which is amplified
Metal detectorA transmitter coil produces an alternating field; a metal object develops eddy currents whose own field changes the receiver coil signal and triggers the alarm
Eddy-current brakingA conducting disc or rail moving through a magnetic field develops eddy currents that give a drag force with no mechanical contact (trains, roller coasters, weighing balances)

6.2.3 Cyclotron and Synchrotron

Definition

Cyclotron

A cyclotron accelerates charged particles in two hollow D-shaped electrodes (dees) placed in a uniform magnetic field perpendicular to their plane, with an alternating voltage applied across the gap. In the field a particle of charge , mass and speed moves in a circle with , so

The orbital frequency is independent of and , so an oscillator of this frequency gives the particle a push in the gap each half-turn. The kinetic energy on leaving at the dee radius is

The cyclotron works only for non-relativistic speeds: at high energy the relativistic mass increase lowers the frequency, so the particle falls out of step.

Synchrotron. The particles move in a ring of fixed radius inside a ring-shaped vacuum tube. As the energy increases, the magnetic field of the bending magnets is increased in step with the momentum ( constant) and the frequency of the accelerating RF cavities is also adjusted. Because only an annulus of magnets is needed it can reach very high energies (GeV to TeV); electron synchrotrons also emit intense synchrotron radiation used for materials studies.

Example 6.2

6.2

A cyclotron with a field of accelerates protons (, ). Find the oscillator frequency and the maximum kinetic energy in MeV for dees of radius .

Frequency:

Maximum kinetic energy:

Answer:

; .


Exercises

Practice Exercises — Induction, Inductance and Eddy Currents

Question 1

State Faraday's and Lenz's laws. A rod long moves at perpendicular to a field of along rails closed through a total resistance of . Find the emf, the current and the power dissipated.

Laws: The induced emf equals the rate of change of flux linkage, , and the induced current opposes the change that produces it.

Numbers:

Answer:

, , .

Question 2

Explain the induced electric field. A long solenoid of radius has a field increasing at . Find the induced electric field at and at from the axis.

Concept: A changing magnetic flux induces an electric field with closed circular lines, given by . It is non-conservative.

Inside ():

Outside ():

Answer:

at ; at .

Question 3

Define self and mutual inductance. A primary solenoid of turns is wound on a length and area , with a secondary of turns wound over it. Find the mutual inductance and the emf induced in the secondary when the primary current changes at .

Definitions: Self-inductance is the flux linkage per unit current in the same coil, ; mutual inductance relates the emf in one coil to the changing current in the other.

Mutual inductance:

Induced emf:

Answer:

; .

Question 4

Derive the energy stored in an inductor and the magnetic energy density. Find the energy density in a field of and the energy stored in () of it.

Derivation: The work to raise the current from to is . For a solenoid, and give , so .

Numbers:

Answer:

; .

Question 5

What is displacement current? A parallel-plate capacitor with circular plates of radius and gap has its voltage rising at . Find the displacement current and the magnetic field at the plate edge. Name three applications of eddy currents.

Displacement current: It is the term that Maxwell added to Ampere's law, equal to the conduction current in the wires while a capacitor charges. Here with

Field at the edge ():

Applications of eddy currents: Induction cooker, metal detector, electromagnetic (eddy-current) braking.

Answer:

; .

← ElectrostaticsElectromagnetic Waves →