Continuity, Navier–Stokes & Euler's Equation of Motion
Open in the Padhaiko app4.5 Mass Balance Equation & Navier–Stokes Equation
In continuum fluid mechanics, the motion of a fluid is governed by fundamental conservation laws expressed as partial differential equations over an infinitesimal control volume : conservation of mass (the continuity equation) and conservation of linear momentum (Reynolds', Navier–Stokes, and Euler's equations of motion).
Continuity Equation (Conservation of Mass)
Let denote the fluid density and denote the velocity vector with components along the Cartesian -, -, and -axes. Conservation of mass across an infinitesimal control volume yields the general continuity equation:
or, in compact vector notation,
This equation applies to steady and unsteady as well as compressible and incompressible fluid flows. Two important special cases are:
- Steady Flow: The density at any point does not change with time (), so the continuity equation reduces to:
- Incompressible Flow: The fluid density is constant in both space and time, so and factors out of the spatial derivatives, reducing the continuity equation to:
Derivation of the Three-Dimensional Continuity Equation
For a fluid of density flowing with velocity components through a Cartesian control volume of dimensions , conservation of mass requires
Proof
Consider an infinitesimal rectangular parallelepiped control volume of dimensions fixed in space, with opposite faces (at coordinate ) and (at coordinate ), each of cross-sectional area perpendicular to the -axis.
- Mass Flux in the -Direction: The mass of fluid entering the control volume per unit time through face is the product of density , face area , and -velocity :
As the fluid moves a small distance along the -axis to the opposite face , the mass flow rate varies continuously with . By a first-order Taylor expansion, the mass of fluid leaving the control volume per unit time through face is:
Subtracting the mass leaving from the mass entering gives the net change (accumulation) of mass inside the control volume per unit time due to flow in the -direction:
- Mass Flux in the - and -Directions: By identical reasoning along the - and -axes, the net mass changes per unit time inside the control volume due to flow in the - and -directions are:
and
Summing (2), (3), and (4), the total net change in mass per unit time due to flow across all six faces of the control volume is:
- Rate of Mass Accumulation Inside the Control Volume: At any instant , the total mass of fluid contained within the elementary volume is:
The time rate of increase of mass inside the fixed control volume is therefore:
- Conservation of Mass: By the principle of conservation of mass, the net rate at which mass enters the control volume equals the rate of increase of mass inside the control volume:
Dividing both sides by the non-zero elementary volume and rearranging terms gives the general continuity equation:
For steady flow, ; for incompressible flow (), equation (7) reduces to:
Navier–Stokes Equations of Motion
Force Hierarchy, Reynolds' Equation & Navier–Stokes Equations
In general fluid flow, six distinct types of forces may act on a fluid element of mass :
- Gravity force (): body force acting throughout the fluid volume due to weight.
- Pressure force (): normal surface force caused by spatial pressure gradients.
- Viscous force (): tangential/normal surface force due to internal shear resistance (viscosity ).
- Turbulence force (): force arising from chaotic eddy fluctuations in turbulent flow.
- Surface tension force (): capillary force at free interfaces.
- Compressibility force (): elastic force due to volume changes.
Applying Newton's second law along the -direction () gives the complete force balance:
- Reynolds' Equation of Motion: Neglecting surface tension () and compressibility () yields Reynolds' equation of motion, used in the analysis of turbulent flows:
- Laminar Viscous Force Balance: Neglecting the turbulence force () for laminar flows reduces the governing balance to gravity, pressure, and viscous forces:
- Navier–Stokes Equations (Cartesian Coordinates): Evaluating , , , and on an incompressible viscous fluid element yields the three Navier–Stokes equations:
- Vector Form of the Navier–Stokes Equation: With velocity vector and gravitational acceleration vector , the three scalar equations combine into:
where is the pressure gradient, is the vector Laplacian of velocity, and
is the material (substantial) derivative.
Derivation of the Navier–Stokes Equations of Motion
For a laminar, incompressible, Newtonian viscous fluid of density and dynamic viscosity moving with velocity under pressure field and gravitational acceleration , Newton's second law applied to an elementary control volume yields
Proof
- Governing Force Balance: By Newton's second law, the total force acting on a fluid element of mass in the -direction equals the product of its mass and -acceleration:
Summing gravity , pressure , viscous , turbulence , surface tension , and compressibility forces gives:
Neglecting surface tension and compressibility gives Reynolds' equation of motion:
Further neglecting turbulence for laminar flow leaves:
- Net Pressure Force : Consider an elementary cube of volume with faces (at ) and (at ) of area . Since pressure acts inward normal to each face of the cube:
- Inward pressure force on face (acting in the direction): .
- Inward pressure force on face (acting in the direction): .
Thus, the net pressure force in the direction is:
- Gravity (Body) Force : Since the mass of the fluid element is and the -component of gravitational acceleration is , the gravitational force along is:
- Viscous Force : Viscous forces arise from the fluid's internal resistance to deformation (shear and normal viscous stresses), governed by Newton's law of viscosity where is the dynamic viscosity. Following the textbook's control-volume formulation on faces and of area :
- Stress force on face : .
- Stress force on opposing face at :
Subtracting the force on from that on gives:
Accounting for the opposing direction of resistive stress on the positive and negative faces across all three coordinate directions (, , and ), the viscous force components acting in the direction are:
Summing these three contributions gives the total viscous force along the -axis:
- Inertial Term via the Material Derivative: Substituting from (5), from (6), and from (11) into (4) yields:
Since the velocity component depends on both time and the moving fluid particle's coordinates , the total acceleration is obtained by the multivariable chain rule:
Substituting the particle velocity components , , and gives:
- Navier–Stokes Equations in Cartesian and Vector Forms: Equating (12) and (13) and canceling the common volume factor yields the Navier–Stokes equation along the -axis:
By cyclic symmetry, the Navier–Stokes equations along the - and -axes are:
Writing and , equations (14)–(16) combine into the vector form:
4.6 Momentum Balance Equations & Euler's Equation of Motion
The momentum balance equations express Newton's second law of motion—that the time rate of change of linear momentum of a fluid element equals the net force acting upon it—by explicitly decomposing the forces into body forces and surface forces.
Momentum Balance Equations for Fluid Flow
Assuming the fluid is a continuum (compressible or incompressible) in a Cartesian control volume , Newton's second law for a fluid element is written per unit volume as:
where is the material derivative.
- Body Force: Acts throughout the volume of the fluid (such as gravity), equal to per unit volume, or on the element.
- Surface Force: Acts on the boundary surfaces of the fluid element and consists of:
- Normal pressure forces: , , (or per unit volume).
- Tangential viscous forces: , , (or per unit volume).
Combining body and surface forces and dividing by gives the momentum balance equations:
and in vector form:
Euler's Equation of Motion for Inviscid Fluid Flow
When a fluid is inviscid (viscosity , so tangential viscous shear stresses vanish), the momentum balance simplifies to Euler's equation of motion.
Euler's Equation of Motion for Inviscid Fluid Flow
Assume that:
- The fluid is inviscid (, zero viscosity).
- The flow is non-turbulent and continuous (compressible or incompressible).
- The only external forces acting on the fluid element are pressure forces and body forces .
Then the equations of motion of the fluid are given by Euler's equations:
- Per unit volume (scalar form):
- Vector form:
- Per unit mass (component form):
Proof
Consider an infinitesimal control volume with dimensions and mass . By Newton's second law of motion,
- Net Pressure Forces: On the face at (of area ), the inward pressure force in the direction is . On the opposite face at , the inward pressure force in the direction is . Thus, the net pressure force in the -direction is:
Similarly, the net pressure force in the -direction is:
and the net pressure force in the -direction is:
- Body Forces: With body force per unit volume , where is the gravitational acceleration vector, the total body forces acting on the volume element in the -, -, and -directions are:
- Acceleration Components: The fluid acceleration components along the -, -, and -axes are given by the material derivative of the velocity components:
where .
- Applying Newton's Second Law: Equating to the sum of the net pressure force and body force in the -direction gives:
Dividing through by yields:
Similarly, in the - and -directions:
- Vector and Per-Unit-Mass Forms: Combining (1), (2), and (3) with , , and gives the vector equation:
Dividing both sides by yields Euler's equation for inviscid fluid flow per unit mass:
with scalar components:
| Equation | Physical Assumptions | Vector / Governing Form |
|---|---|---|
| General Continuity Equation | Conservation of mass (compressible or incompressible, steady or unsteady) | |
| Incompressible Continuity Equation | Constant density () | |
| Reynolds' Equation of Motion | Neglects surface tension () and compressibility (); retains turbulence () | |
| Navier–Stokes Equation | Laminar, incompressible, Newtonian viscous fluid () | |
| Euler's Equation of Motion | Inviscid (), non-turbulent fluid |