PadhaikoAll subjects

Inverse Z-Transform & Convolution

Engineering Mathematics III (ENSH 201)

Open in the Padhaiko app

5.5 Inverse Z-Transform

A time-signal sequence for or a discrete sequence for obtained from a complex-valued function is called the inverse -transform of .

Definition

Inverse Z-Transform

If the -transform of a time-signal sequence is , then the inverse -transform of is denoted by

Similarly, if the -transform of a discrete sequence is , then the inverse -transform of is

When cannot be matched directly to standard pairs in a -transform table, we decompose or expand using one of four standard methods:

  1. Power Series Method (Long Division Method): Expanding into an infinite series in powers of and reading off the sequence term as the coefficient of .
  2. Partial Fraction Expansion Method: Expanding into partial fractions and inverting each term using standard pairs from the table.
  3. Convolution Method: Factoring and computing the discrete convolution sum .
  4. Residue Method (Inversion Integral Method): Evaluating the contour inversion integral as the sum of residues of at all poles inside the contour .
Table of Standard Z-Transforms and Operational Properties (Pages 352–353)
S.N.Laplace Continuous Discrete Sequence ()Z-Transform
1.——
2.——
3.
4.
5.
6.
7.
8.
9.
10.——
11.——
12.——
13.——
14.——
15.—Multiply by or
16.—Damping
17.—Scaling by
18.—Left shift (delay)
19.—Right shift (advance)
20.—Initial value theorem
21.—Final value theorem

Power Series Method (Long Division Method)

When is a rational function or an analytic function of , we expand into an infinite power series in ascending powers of (or descending powers of ). For a causal sequence:

Comparing the terms of the power series with this definition, the sample value is simply the coefficient of .

For a rational function , the power series expansion in the region of convergence is found by arranging both numerator and denominator in descending powers of (or ascending powers of ) and carrying out ordinary polynomial long division.

Example 1

1

Obtain the inverse -transform of for using the definition of -transform.

Expressing in terms of ascending powers of : The given complex function is

Performing long division: Dividing by :

Thus the function is expanded as

Comparing with the definition series: Comparing with

we find:

Answer:
Example 2

2

Obtain the inverse -transform of for using the definition of -transform.

Expressing in terms of : The given complex function is

Performing long division: Dividing by :

Thus

Comparing coefficients with the definition series: Comparing with , we obtain

Answer:
Example 3

3

Obtain the inverse -transform of using the definition of -transform.

Expanding as a power series in : The complex function is

Using the Maclaurin series expansion of the exponential function with :

Matching coefficients: Comparing with the definition series , we find:

Answer:
Example 4

4

Obtain the inverse -transform of using the definition of -transform.

Rewriting the logarithmic expression in powers of : The given function is

Expanding into power series: Using the logarithmic series expansion for with :

Comparing coefficients with the definition series: Comparing with :

Answer:

5.6 Convolution of Sequences and Partial Fraction Method

Definition

Discrete Convolution of Sequences

Let and be two discrete sequences defined for (with for ). The convolution sum of and , denoted , is defined by

Because convolution is commutative, .

Theorem

Theorems 10 & 11: Real Convolution Theorem

If and for , with and , then

or equivalently,

Proof

By the definition of the -transform:

Substitute the dummy index . Since for , the summation over starts effectively at :

Example 5

Inverse Z-Transform Using Convolution Theorem

Using the convolution theorem, find the inverse -transform of

Factoring into standard transform pairs: Write as the product of two elementary transforms:

Their individual inverse -transforms are:

Applying the convolution summation: By the convolution theorem, :

Using the sum of a finite geometric progression with :

Answer:

Partial Fraction Expansion Method

A rational complex-valued function can be expressed as

To apply partial fractions efficiently, we expand rather than directly. Multiplying the resulting partial fractions by produces standard table terms of the form and , which invert immediately.

Definition

Partial Fraction Expansion Coefficients

  1. Simple (Distinct) Poles: If has distinct poles :

where the residue coefficient is given by

  1. Multiple (Repeated) Poles: If has a pole of multiplicity at :

where

Example 1

Worked Example 1 (Page 358): Simple Poles at z = -2, -5

Obtain the inverse -transform of using the partial fraction method.

Factorising the denominator and forming : Factor the denominator polynomial:

The poles are at and . Forming :

Determining coefficients and : Using the residue formula for simple poles:

Multiplying by and taking the inverse -transform: Substitute and :

Taking the inverse -transform of each term:

Answer:
Example 2

Worked Example 2 (Pages 358–359): Sampled Exponential Signal

Obtain the inverse -transform of , where is a constant and is the sampling period, using the partial fraction method.

Forming and setting up partial fractions: The function has simple poles at and . Divide by :

Calculating residues and :

Reconstructing and inverting: Multiplying through by :

Taking the inverse -transform:

In terms of continuous sampling instants :

Answer:
Example 3

Worked Example 3 (Pages 359–360): Double Pole at z = 2 and Simple Pole at z = 1

Obtain the inverse -transform of using the partial fraction expansion method.

Factoring out and setting up partial fractions: Rewrite :

The denominator has a multiple pole of order two at and a simple pole at :

Evaluating the coefficients: For and at the double pole :

For at the simple pole :

Multiplying by and inverting term by term: Substitute :

Using standard inverse pairs :

Answer:
Example 4

Worked Example 4 (Pages 360–361): Double Pole at z = 1 and Simple Pole at z = 2

Obtain the inverse -transform of using the partial fraction expansion method.

Setting up the partial fraction expansion of : Factor out :

Multiplying both sides by :

Determining coefficients : Substitute :

Substitute :

Equate coefficients of :

Multiplying by and inverting: Substitute :

Taking the inverse -transform of each term:

Answer:

Residue Method (Inversion Integral Method)

The residue method, based on complex variable theory and the Cauchy residue theorem, is the most general and rigorous technique for evaluating the inverse -transform.

Theorem

Inversion Integral & Residue Theorem

Let be the one-sided -transform of a causal sequence , analytic in the region . Multiplying both sides by :

Integrating term by term along a counterclockwise closed contour lying entirely within the region of convergence and enclosing all poles of :

The residues of are evaluated using the standard formulas:

  1. Simple Pole at :
  1. Multiple Pole of Order at :
Example 1

Worked Example 1 (Page 362): Simple Poles at z = 2 and z = 3

Obtain the inverse -transform of using the method of residues and poles.

Finding poles and setting up residues: The complex function is . Setting the denominator to zero gives two simple poles at and .

The sequence is given by

Calculating residues at simple poles: At :

At :

Summing residues:

Answer:
Example 2

Worked Example 2 (Pages 362–363): Double Pole at z = -1 and Simple Pole at z = 1

Obtain the inverse -transform of using the method of residues and poles.

Identifying poles of : The function is

The denominator vanishes at (multiple pole of order two) and (simple pole).

Residue at multiple pole (order 2):

Residue at simple pole :

Summing residues:

Answer:
Example 3

Worked Example 3 (Pages 363–364): Imaginary Poles at z = ±2i

Obtain the inverse -transform of using the inversion integral formula.

Finding poles: The denominator factors as

Both are simple poles on the imaginary axis.

Residue at :

Writing in polar form: with :

Residue at conjugate pole : Because complex poles occur in conjugate pairs with conjugate residues:

Summing residues:

Answer:
Example 4

Worked Example 4 (Page 364): Complex Conjugate Poles at z = 1 ± i

Obtain the inverse -transform of using the inversion integral formula.

Finding poles: Setting :

The simple poles are and .

Residue at :

Convert to polar form: , :

Applying De Moivre's theorem:

Residue at conjugate pole and summation: The residue at is the complex conjugate:

Summing the two residues:

Answer:
Example 5

Worked Example 5 (Page 365): Double Pole at z = 3 and Simple Pole at z = 2

Obtain the inverse -transform of using the inversion integral method.

Finding poles of : The function has a simple pole at and a double pole at .

Residue at simple pole :

Residue at multiple pole (order 2):

Substitute (noting that the denominator ):

Summing residues:

Answer:
Example 6

Worked Example 6 (Pages 365–366): Double Pole at z = 1 and Simple Pole at z = exp(-aT)

Obtain the inverse -transform of using the inversion integral method.

Identifying poles of : The function is . It has a multiple pole of order two at and a simple pole at .

Residue at simple pole :

Residue at multiple pole (order 2):

Summing residues and writing solution:

Writing :

Answer:

Exercise - 20

Exercise 20: Inverse Z-Transform

Question 1

Find the inverse -transform using the partial fraction expansion method:

Forming the partial fraction expansion: Let . Dividing by :

Evaluating the coefficients: Using the cover-up method:

Multiplying by and taking the inverse transform: Multiplying through by :

Taking the inverse -transform:

For : . For :

Evaluating successive values gives .

Answer:
Question 2

Find the inverse -transform using the partial fraction expansion method:

Forming : Given :

Finding coefficients and :

Multiplying by and inverting:

Taking the inverse -transform yields

Answer:
Question 3

Find the inverse -transform using the partial fraction expansion method:

Expanding into partial fractions: Given :

Inverting term by term: Using and the time-shifting property :

Writing the sequence values: Evaluating for :

Thus the sequence is . As noted in the erratum, the printed textbook answer omitted the two leading zeros.

Answer:

Printed:

Question 4

Find the inverse -transform using the partial fraction expansion method:

Factoring denominator and forming : Factor . Dividing by :

Calculating coefficients:

Inverting the transform:

Taking the inverse -transform:

Answer:
Question 5

Find the inverse -transform using the partial fraction expansion method:

Forming : Given :

Evaluating coefficients and :

Inverting:

Taking the inverse -transform yields

Answer:
Question 6

Find the inverse -transform using the partial fraction expansion method:

Forming : Given :

Evaluating coefficients:

Multiplying by and taking the inverse transform:

Taking the inverse -transform gives

Answer:
Question 7

Find the inverse -transform using the partial fraction expansion method:

Forming with repeated poles: Given :

Calculating the partial fraction coefficients:

Inverting each term: Multiplying through by :

Using standard transforms and :

Answer:
Question 8

Find the inverse -transform using the partial fraction expansion method:

Forming : Given :

Finding coefficients:

Inverting:

Taking the inverse -transform yields

Answer:
Question 9

Find the inverse -transform using the partial fraction expansion method:

Factoring denominator and forming : Factor . Dividing by :

Determining the coefficients:

Inverting the partial fractions: Multiplying by :

Taking the inverse transform, noting that :

As noted in the erratum, the printed textbook answer omitted on the middle term.

Answer:

Printed:

Question 10

Find the inverse -transform using the residue and poles method:

Setting up the inversion integral and poles: The inversion formula gives :

The integrand has two simple poles at and .

Calculating the residues: At :

At :

Summing the residues:

Answer:
Question 11

Find the inverse -transform using the residue and poles method:

Setting up the residue for a triple pole: Let . The inversion formula is :

The function has a pole of order at .

Evaluating the residue at : Using the residue formula for a pole of order :

Writing the sequence:

Answer:
Question 12

Find the inverse -transform using the residue and poles method:

Setting up the inversion integral: Let . The inversion integrand is

For , the only poles are simple poles at and .

Calculating residues at simple poles for : At :

At :

Summing the residues: For :

For , has an extra pole at with residue , giving . Thus for with .

Answer:
Question 13

Find the inverse -transform using the residue and poles method:

Setting up poles for : Let . The integrand is

For , the poles are simple poles at and .

Evaluating the residues for : At :

At :

Summing the residues: Summing the two residues gives

As noted in the erratum, for , an extra pole at gives , while the printed textbook formula states for .

Answer:

Printed:

Question 14

Find the inverse -transform using the residue and poles method:

Setting up residues: Let .

The function has two simple poles at and .

Evaluating residues: At :

At :

Summing residues:

Answer:
Question 15

Find the inverse -transform using the residue and poles method:

Identifying poles of : Let . For :

The function has a simple pole at and a double pole at .

Evaluating residue at the simple pole :

Evaluating residue at the double pole :

Combining residues: For :

Answer:
Question 16

Find the inverse -transform using the residue and poles method:

Setting up poles for : Let .

For all , there is a simple pole at and a double pole at .

Evaluating residue at :

Evaluating residue at :

Summing residues:

Answer:
Question 17

Find the inverse -transform using the residue and poles method:

Expressing in positive powers of : Multiplying numerator and denominator by :

The inversion integrand is

There are two simple poles at and .

Calculating residues: At :

At :

Summing residues:

Answer:
Question 18

Find the inverse -transform using the residue and poles method:

Expressing in positive powers of : Multiplying numerator and denominator by :

The inversion integrand is

For , the poles are simple poles at and .

Evaluating residues for : At :

At :

Writing the sequence: Summing the residues for :

For , has an additional pole at with residue , giving . Thus for with , or for .

Answer:
Question 19

Find the inverse -transform using the residue and poles method:

Expressing in positive powers of and finding complex poles: Multiplying numerator and denominator by :

The inversion integrand is

The denominator roots are

In polar form, where

Calculating the residue at : Using the derivative formula with :

Thus:

Summing over conjugate poles: Since :

Substituting :

As noted in the erratum, the printed answer wrote instead of .

Answer:

Printed:

Question 20

Find the inverse -transform using the residue and poles method:

Finding complex poles: Let . The inversion integrand is

The roots of the denominator are

Thus and . Let .

Calculating the residue at : Using :

Therefore:

Summing over conjugate poles: Since :

Answer:

Past exam questions for Engineering Mathematics III

← Properties, Initial/Final Value Theorems & DifferentiationDifference Equations & Sum of Series →