Past exam question: 2082 Chaitra (Regular), Q5(a)
Open in the Padhaiko appQuestion
Draw the internal architecture of 8086 microprocessor.
Solution
Architectural Partitioning: The internal architecture of the Intel 8086 is split into two independent, asynchronous processing units connected via an internal bus:
- Bus Interface Unit (BIU): Handles all external bus transfers (instruction fetching, data read/write, physical address calculation).
- Execution Unit (EU): Decodes and executes instructions fetched by the BIU.
Internal Architecture Block Layout:
+-------------------------------------------------------------------------+
| BUS INTERFACE UNIT (BIU) |
| |
| +--------------------+ +-------------------------------------+ |
| | Segment Registers | | 6-Byte Instruction Queue (FIFO) | |
| | CS, DS, SS, ES | | [ Byte 1 | 2 | 3 | 4 | 5 | 6 ] | |
| +---------+----------+ +------------------+------------------+ |
| | | |
| +---------v----------+ | Prefetched |
| | Instruction Pointer| | Instruction Stream |
| | (IP) | | |
| +---------+----------+ v |
| | To Execution Unit |
| +---------v--------------------+ |
| | Dedicated 20-Bit Adder | ----> 20-bit System Address Bus |
| +------------------------------+ (A19–A0 / AD15–AD0) |
+-------------------------------------------------------------------------+
| EXECUTION UNIT (EU) |
| |
| +--------------------+ +--------------------+ +--------------------+ |
| | General Registers | | Pointer & Index | | Control System & | |
| | AX (AH | AL) | | SP (Stack Ptr) | | Instruction Decoder| |
| | BX (BH | BL) | | BP (Base Ptr) | +---------+----------+ |
| | CX (CH | CL) | | SI (Source Idx) | | |
| | DX (DH | DL) | | DI (Dest Idx) | v |
| +---------+----------+ +---------+----------+ +---------+----------+ |
| | | | 16-bit ALU & | |
| +-----------+-----------+ | Flag Register | |
| | | (9 Active Flags) | |
| v +--------------------+ |
| 16-Bit Internal Data Bus |
+-------------------------------------------------------------------------+Answer:
The 8086 architecture consists of two asynchronous units: the Bus Interface Unit (BIU) with segment registers, IP, 20-bit adder, and 6-byte instruction queue; and the Execution Unit (EU) with 16-bit ALU, general/pointer registers, decoder, and flag register.