Past exam question: 2071 Shrawan, Q6
Open in the Padhaiko appQuestion
Explain Quadrature Amplitude Modulation (QAM) with transmitter and receiver block diagram.
Solution
Concept of QAM: Quadrature Amplitude Modulation (QAM) is a hybrid digital modulation scheme that combines both amplitude shift keying (ASK) and phase shift keying (PSK).
- It transmits two independent message signals simultaneously over the same carrier frequency using two orthogonal quadrature carriers:
where is the in-phase component and is the quadrature component.
- In -QAM, each transmitted symbol represents bits (e.g., 4 bits/symbol in 16-QAM), achieving high bandwidth efficiency.
QAM Transmitter Block Diagram:
+-------------------+
/-----> | D/A Converter (I) | ---> [ Multiplier ] ---\
| +-------------------+ ^ |
| | cos(wct) |
Serial | [ Oscillator ] v
Bit Stream ---> [ Serial-to-Parallel ] | [ Summer ] ---> s(t)
[ Splitter (k bits) ] v -90 deg ^
| [ Phase Shift ] |
| +-------------------+ | |
\-----> | D/A Converter (Q) | ---> [ Multiplier ] ---/
+-------------------+ -sin(wct)
- Transmitter Operation:
- The serial bitstream at rate is split into groups of bits by a serial-to-parallel converter.
- The bits are divided equally into an in-phase () branch and a quadrature () branch.
- Digital-to-analog converters generate discrete multi-level amplitudes for and .
- The component modulates carrier , while the component modulates the orthogonal carrier .
- The two modulated carriers are summed and transmitted over the RF channel.
QAM Receiver Block Diagram:
+-------------------+
/------> | Multiplier | ---> [ Lowpass Filter ] ---> [ Decision / A/D ] ---\
| +-------------------+ |
| ^ cos(wct) v
Received | | [ Parallel-to-Serial ] ---> Recovered
Signal s(t) -+ [ Carrier Recovery ] [ Combiner ] Data
| | ^
| v -90 deg |
| +-------------------+ |
\------> | Multiplier | ---> [ Lowpass Filter ] ---> [ Decision / A/D ] ---/
+-------------------+
- Receiver Operation:
- The incoming signal is split and multiplied by coherent local carriers and recovered from the received signal.
- In the upper branch:
- A lowpass filter strips away the double-frequency terms, leaving purely .
- Similarly, the lower branch extracts .
- Decision threshold slicers detect the discrete levels, which are recombined into the original serial bitstream.
Answer:
QAM transmits two independent baseband streams simultaneously by amplitude-modulating orthogonal carriers (in-phase ) and (quadrature ) and summing them. At the receiver, coherent multiplication by and followed by low-pass filtering and decision slicers separates and back into the original bitstream.