Past exam question: 2076 Chaitra, Q9(d)
Open in the Padhaiko appWrite short note on: Multi mode optical fiver
Solution
Structure and Light Propagation in Multi-Mode Fiber (MMF): Multi-Mode Optical Fiber features a relatively large glass core diameter (typically or ), compared to single-mode fiber (), surrounded by a standard cladding. Because the core diameter is much larger than the optical wavelength ( or ), light rays propagate simultaneously along multiple distinct optical paths (modes) via total internal reflection at differing angles.
Types and Performance Trade-offs:
- Step-Index MMF:
- The refractive index of the core is completely uniform throughout.
- Rays traveling straight down the axis take shorter paths than high-angle bouncing rays, causing light pulses to spread out significantly in time. This phenomenon, known as intermodal dispersion, severely limits maximum distance and bit rate.
- Graded-Index (GRIN) MMF:
- The core refractive index decreases parabolically from the center outward.
- Rays traversing outer helical paths travel through lower refractive index glass, traveling faster and arriving nearly in phase with central axial rays, greatly reducing modal dispersion.
- Key Characteristics:
- Uses inexpensive light sources such as LEDs or Vertical-Cavity Surface-Emitting Lasers (VCSELs).
- Core size facilitates easy fiber splicing, alignment, and termination.
- Typical reach: at (OM3/OM4), making it standard for local area campus backbones and data centers.
Multi-mode optical fiber (MMF) has a wide core ( or ) that supports concurrent propagation of multiple light modes using low-cost LEDs/VCSELs. While susceptible to intermodal dispersion over long distances, Graded-Index MMF minimizes pulse spreading, making it the preferred, cost-effective medium for short-reach enterprise LAN backbones and data centers ().