Transient Analysis R-L-C Circuit by Classical Method (part 1: 2.1–2.4)
Open in the Padhaiko app2.1 Introduction
The classical method solves the circuit's differential equation directly in the time domain. The complete response is the sum of two parts:
Complementary and Particular Response
- Complementary function (natural or transient response): the solution of the equation with the source set to zero. It depends only on the circuit elements and dies out for a passive circuit with .
- Particular integral (forced or steady-state response): any one solution of the full equation. It has the same form as the source.
- The arbitrary constants in are fixed afterwards, using the initial conditions at from Chapter 1 applied to the complete response .
2.2 First order differential equation with constant coefficient
First-Order Equation
The standard form is
Complementary function: put . Then . The time constant is : in R-L circuits , in R-C circuits .
Complete solution: , and follows from :
2.3 Higher order homogeneous and non-homogeneous differential equation with constant coefficient
Second-Order Equation and Characteristic Roots
For
the homogeneous equation () is solved by trying , which gives the characteristic equation
The equation is non-homogeneous when . The same idea extends to order : the characteristic equation is a polynomial of degree with roots.
| Roots of the characteristic equation | Form of | Circuit name |
|---|---|---|
| Real and distinct | overdamped | |
| Real and equal | critically damped | |
| Complex pair | underdamped | |
| Purely imaginary | undamped (lossless) |
2.4 Particular integral by method of undetermined coefficient
Method of Undetermined Coefficients
Guess with the same form as the source and with unknown coefficients. Substitute in the differential equation and equate coefficients of like terms.
| Source | Trial |
|---|---|
| constant | constant |
| or |
2.1
Solve with and find the time constant.
Complementary function. The characteristic equation is , so and . The time constant is .
Particular integral. The source is constant, so try . Substituting gives , so .
Constant. and give , so .
with .
2.2
Solve with and .
Characteristic equation. , so and (real, distinct):
Constants. From : . From : .
(overdamped).
2.3
Solve with and .
Complementary function. , so .
Particular integral. The source is not part of , so try . Substituting, , so and .
Constants. . Then gives , and gives . Hence and .
.
Exercises
Practice Exercises: Classical Method Basics
Write the form of the complementary function for the three cases of a second-order equation with real coefficients, and state what the three cases are called in an R-L-C circuit. How is a particular integral chosen when the source is ?
Cases. Real distinct roots give (overdamped). Equal roots give (critically damped). A complex pair gives (underdamped).
Sine source. Take , substitute, and equate coefficients of and . Both terms are needed because the derivative of a sine is a cosine.
Overdamped, critically damped and underdamped as above; trial .
Solve with .
Complementary and particular. . Try : , so .
Constant. and give .
.
Solve with and .
Roots. gives , so . A constant source gives (from ).
Constants. gives . Differentiating, , so .
.
Solve with and .
Solution form. Roots give . A constant source gives .
Constants. gives . gives .
(undamped oscillation about ).
Solve with .
Particular integral. Try . Substituting gives .
Constant. and give .
.