AC Motor
Open in the Padhaiko app9.1 Construction, production of rotating magnetic field and operating principle of three-phase induction motor
Construction of a Three-Phase Induction Motor
- Stator: laminated slotted core with a three-phase winding placed apart in space, in a frame.
- Rotor, squirrel-cage: aluminium or copper bars in the slots, short-circuited by end rings. Rugged, cheap, but low starting torque.
- Rotor, slip-ring (wound): a three-phase winding brought out to three slip rings, so external resistance can be added. Higher starting torque, lower starting current.
- A small air gap ( to ) separates stator and rotor. The rotor receives energy only by induction, with no connection to the supply.
Rotating Magnetic Field (RMF)
Three equal windings apart carrying balanced three-phase currents , , produce a resultant flux of constant magnitude that rotates at the synchronous speed
Reversing any two supply leads reverses the direction of rotation.
Operating Principle and Slip
The RMF cuts the stationary rotor conductors and induces an emf (Faraday). The closed rotor circuit carries current, and by the rotor experiences a torque in the direction of the field (Lenz: it opposes the relative motion). The rotor accelerates but can never reach , because then there would be no relative motion and no torque. The slip is
Full-load slip is to . At standstill .
9.2 Torque equation of three-phase induction motor at standstill and running condition
Torque Equation
Let be the rotor emf per phase at standstill, the rotor resistance and the standstill rotor reactance, per phase. At slip the rotor emf is , the reactance is , and the rotor current is
Torque is proportional to rotor power in the air gap, with :
- Running: , with .
- Standstill (): .
Power Flow and Losses
Stator input minus stator loss air-gap power rotor copper loss mechanical power developed minus friction and windage shaft output. Therefore
9.3 Torque slip characteristics, condition for maximum torque and effect of rotor resistance on torque slip characteristics
Maximum Torque
Setting gives the slip at maximum torque and the maximum torque:
is independent of ; only the slip at which it occurs changes. Ratios often used: .
Torque-Slip Curve and Effect of Rotor Resistance
- For small slip () torque is nearly proportional to (straight line): the stable region where the motor normally runs.
- Beyond torque falls with increasing slip (unstable region toward standstill).
- Increasing (slip-ring motor) moves toward . When , and the starting torque equals . The starting current also falls, but running efficiency falls because of rotor copper loss, so the extra resistance is cut out after starting.
9.4 Single-phase induction motor
Single-Phase Induction Motor
A single winding on the stator carries an alternating current, which gives a pulsating (not rotating) flux. At standstill the forward and backward torques are equal and opposite, so the motor has no starting torque. Once the rotor is turned in either direction it continues to accelerate in that direction. The motor needs a way to produce a rotating field temporarily, which is the job of an auxiliary winding.
9.5 Double field revolving theory
Double Revolving Field Theory
A pulsating flux along one axis equals two rotating fluxes of amplitude turning in opposite directions at :
- The rotor sees slip with respect to the forward field and slip with respect to the backward field.
- At standstill : , net torque zero.
- When running forward, the forward torque exceeds the backward torque, so the net torque is the difference. The backward field also induces a rotor current at nearly , which gives a small pulsating torque and extra loss.
9.6 Starting of single-phase induction motor (capacitor start and run, shaded pole)
| Type | Method | Features |
|---|---|---|
| Capacitor-start | auxiliary winding with a series capacitor, removed by a centrifugal switch near speed | high starting torque ( to times full load), pumps, compressors |
| Capacitor-start capacitor-run | two capacitors, or one run capacitor kept connected | best performance, high power factor, quiet |
| Permanent-split capacitor | one capacitor always connected | moderate starting torque, fans, blowers, speed control easy |
| Split-phase (resistance start) | auxiliary winding of higher resistance, lower reactance | low starting torque, washing machines |
| Shaded-pole | copper ring (shading coil) round part of each pole delays the flux there, giving a weak moving field toward the shaded part | very low torque, cheap, small fans and toys |
9.7 Introduction to permanent magnet brushless DC motor, hysteresis motor, stepper motor, servo motor, universal motor
| Motor | Principle | Characteristic | Use |
|---|---|---|---|
| PM brushless DC | permanent-magnet rotor, stator windings switched electronically by rotor-position sensors | high efficiency, no brushes, long life | drones, fans, EVs, disk drives |
| Hysteresis | rotor of hard magnetic steel is magnetised by the stator field and locks at synchronous speed | constant-speed, smooth, quiet, self-starting | clocks, record turntables |
| Stepper | stator coils energised in sequence, rotor moves in fixed steps: step angle | open-loop position control | printers, CNC, 3-D printers |
| Servo | motor plus feedback (encoder or potentiometer) and controller | accurate position, speed, torque control | robots, antenna drives, machine tools |
| Universal | series-wound commutator motor that runs on a.c. or d.c. | high speed, high starting torque, speed falls with load | drills, mixers, vacuum cleaners |
9.1
A four-pole induction motor is supplied at and runs at . Find the synchronous speed, slip and rotor current frequency. How many poles does a motor running at have if its slip is ?
Synchronous speed. .
Slip and rotor frequency. and .
Second motor. , so poles.
, , ; the second motor has poles.
9.2
A -pole, three-phase induction motor has a standstill rotor emf per phase, and per phase. Find the full-load torque at slip, the starting torque, the slip at maximum torque and the maximum torque.
Synchronous speed. , so and .
Full-load ().
Starting (). .
Maximum. and .
, , , .
9.3
A -pole, induction motor takes from the supply. Stator losses are , friction and windage and the slip is . Find the air-gap power, rotor copper loss, shaft output, efficiency and shaft torque.
Air-gap power. .
Rotor loss and mechanical power. and .
Output and efficiency. and .
Torque. , , :
, , , , .
Exercises
Practice Exercises: AC Motor
Explain how a rotating magnetic field is produced by a three-phase winding, and why a three-phase induction motor can never run at synchronous speed. State the effect of increasing the rotor resistance on the torque-slip curve.
RMF. Three windings apart in space carry currents apart in time. At each instant their fluxes add to a resultant of constant magnitude , and its position advances per supply cycle, giving .
Why . If the conductors would not cut flux, no emf or current would be induced and the torque would be zero.
Rotor resistance. is unchanged, shifts toward , starting torque rises (maximum when ) and the starting current falls.
RMF of constant magnitude ; slip is needed for torque; moves toward standstill.
An -pole, induction motor runs at . Find , the slip and the rotor frequency.
Calculation. , , .
, , .
A -pole, slip-ring motor has , and per phase. Find the slip at maximum torque, , the starting torque, and the extra rotor resistance per phase that makes the starting torque equal to .
Maximum torque. and, with , .
Starting torque. .
External resistance. Starting torque is maximum when , so add per phase. Then .
, , , extra resistance per phase.
A -pole, single-phase induction motor runs at . Using the double-revolving-field theory find the slip with respect to the forward and backward fields and the rotor frequencies. Why is the motor not self-starting, and how does a capacitor-start motor fix this?
Slips. . Forward slip . Backward slip .
Frequencies. Forward rotor current: . Backward: .
Self-starting. At both slips are , so forward and backward torques are equal. An auxiliary winding in series with a capacitor makes a -shifted current that creates a rotating field at starting, then drops out via a centrifugal switch.
, ; , .
A stepper motor has a step angle of . How many steps make one revolution, and what is the speed in rpm when driven at pulses per second? Name one application each for a servo, a universal and a hysteresis motor.
Steps per revolution. .
Speed. .
Applications. Servo: robot arm position control. Universal: hand drill or vacuum cleaner. Hysteresis: electric clock or turntable.
steps per revolution; .