DC Machine
Open in the Padhaiko app8.1 Constructional details of DC machine
Parts of a DC Machine
- Yoke (frame): cast steel or cast iron outer shell. It carries the flux and gives mechanical support.
- Field poles and pole shoes: laminated poles fixed to the yoke, carrying the field winding. The shoe spreads the flux evenly over the armature.
- Armature core: laminated silicon-steel cylinder on the shaft, with slots for the armature winding. Laminations reduce eddy-current loss.
- Armature winding: copper conductors in the slots, connected as lap (parallel paths , high current, low voltage) or wave (two paths , high voltage).
- Commutator: hard-drawn copper segments insulated by mica. It converts the alternating emf in the armature to a unidirectional output in a generator and reverses armature current in a motor.
- Brushes and brush gear: carbon brushes press on the commutator and connect the rotating armature to the external circuit.
- Interpoles, end covers, bearings and fan complete the machine.
8.2 Operating principle and EMF equation of DC generator
Generator Principle and EMF Equation
Principle: when a conductor cuts magnetic flux, an emf is induced (Faraday). The commutator rectifies the alternating emf of each coil.
Let be the flux per pole (Wb), the number of poles, the total armature conductors, the parallel paths and the speed in rpm. Flux cut per revolution is per conductor, and each revolution takes s, so the emf per conductor is . With conductors in series per path:
Lap winding: . Wave winding: . For a given machine .
8.3 Operating principle and torque equation of DC motor
Motor Principle and Torque Equation
Principle: a current-carrying conductor in a magnetic field experiences a force . The commutator keeps the force on all conductors in the same direction, so the armature turns.
Torque per conductor is . Summing over conductors with each gives
So . Armature power , where .
8.4 Types of DC machine
| Type | Field connection | Terminal relations |
|---|---|---|
| Separately excited | field from an independent source | |
| Shunt | field in parallel with armature, high resistance, many turns | generator: ; motor: |
| Series | field in series with armature, low resistance, few turns | |
| Compound (cumulative or differential) | both shunt and series fields (long or short shunt) | combination |
8.5 Back EMF and its role in DC motor
Back EMF
The rotating armature conductors cut flux and develop an emf that opposes the supply voltage (Lenz's law). The armature current is
Role: is the self-regulating mechanism. If the load increases the speed falls, falls, rises and the torque grows until it meets the load. At starting so is very large, which is why a starter is needed. The mechanical power developed is , and it is the energy conversion link between electrical and mechanical sides. Speed follows .
8.6 Performance characteristics of DC motor
| Motor | Speed–load | Torque– | Typical use |
|---|---|---|---|
| Shunt | nearly constant, falls to from no load to full load | (straight line) | lathes, fans, pumps |
| Series | falls sharply with load, dangerous at no load (races) | below saturation | traction, cranes, hoists |
| Cumulative compound | falls more than shunt, can start heavy loads | between shunt and series | presses, shears, elevators |
8.7 Starting of DC motor using 3-point starter
Three-Point Starter
Because at standstill, a variable starting resistance is placed in series with the armature: . As the motor accelerates, builds up and is cut out step by step.
The starter has three terminals: L (line), A (armature) and F (field). Features:
- A handle moves over resistance studs. At the last stud it is held by a no-volt (hold-on) coil (an electromagnet) in series with the shunt field.
- The no-volt coil releases the handle to the OFF position if the supply fails or the field circuit opens, preventing restart with full voltage.
- An overload release coil trips the handle on excessive current.
- The field connects to the supply as soon as the handle moves, so the field carries full current at the start, which gives maximum starting torque.
8.8 Speed control of DC motor (armature control, field control)
Speed Control
Since there are three ways to change speed:
- Field (flux) control: a rheostat in series with the shunt field reduces and raises speed above rated. It is economical, with small losses, but the speed range is limited by commutation and torque falls ( at limited power).
- Armature (rheostat) control: resistance in series with the armature lowers and so reduces speed below rated. Easy but wasteful ( loss) and speed varies with load.
- Armature voltage control: (Ward-Leonard) varying gives smooth control from zero upwards at constant torque.
For a constant load torque, is constant, so must rise when is reduced.
8.9 Losses and efficiency
Losses and Efficiency
- Copper losses: armature (variable), shunt-field (constant), series-field .
- Iron (core) losses: hysteresis and eddy-current loss in the armature core (constant at constant speed and flux).
- Mechanical losses: friction (bearings, brushes) and windage.
- Stray load losses.
Iron plus mechanical losses together are the rotational (stray) losses. For a generator the maximum efficiency occurs when the variable loss equals the constant loss (field plus rotational), so .
8.1
A -pole generator has armature conductors, flux per pole and runs at . Find the generated emf for lap winding and for wave winding.
Lap winding ():
Wave winding ():
Wave winding gives twice the voltage with half the current capacity.
(lap) and (wave).
8.2
A shunt motor takes from the supply. and . Find the back emf, the armature power and the torque at .
Currents. so .
Back emf and power. and .
Torque. so .
, , .
8.3
For the motor of the previous example (running at with ) the shunt-field resistance is increased until the flux falls to of its value. The load torque is constant. Find the new speed.
New armature current. Constant torque with gives :
New back emf. .
Speed. Since :
: weakening the field raises the speed.
Exercises
Practice Exercises: DC Machine
Explain the role of back emf in a DC motor. Why is a starter required, and why does a 3-point starter have a no-volt coil? How is the speed of a shunt motor controlled above and below rated speed?
Back emf. opposes the supply, so . It automatically adjusts armature current to the load.
Starter. At standstill and is many times rated. A series starting resistance limits it. The no-volt coil, in series with the field, holds the handle at the final stud and returns it to OFF if the supply or field fails.
Speed control. Above rated: weaken the field (field control). Below rated: add resistance in the armature circuit (armature control), or lower the armature voltage.
Field control for speeds above rated, armature control for speeds below rated.
A shunt generator delivers at . and . Find the armature current and the generated emf.
Currents. , , so .
EMF. .
, .
A shunt motor has and rated armature current . Find the starting current without a starter, the starter resistance that limits the starting current to times rated, and the rated back emf.
No starter. , which is times rated.
With starter. Limit , so and .
Rated back emf. .
; ; .
A series motor has total resistance . At it runs at . Find the speed and the torque ratio when the current falls to (take flux proportional to current).
Back emfs. and .
Speed. and :
Torque. , so .
; torque falls to .
A shunt motor takes and has , and rotational losses of . Find the efficiency, and the armature current at which the efficiency is maximum.
Input and losses. . , . Armature copper , field , rotational ; total .
Efficiency. .
Maximum efficiency. Constant losses are . Maximum when , so .
; maximum efficiency at .