PadhaikoAll subjects

Magnetic Field (part 2: 3.6–3.9)

Electromagnetics (ENEX 254)

Open in the Padhaiko app

3.6 Scalar and magnetic vector potential

In electrostatics, the irrotational condition allows defining the scalar potential via . In magnetostatics, because has non-zero curl wherever current flows (), potential formulations require careful geometric and physical distinction.

Magnetic Vector Potential ()

Because Gauss's law for magnetism dictates that , and the divergence of any vector curl is identically zero (), the magnetic flux density can always be defined as the curl of a magnetic vector potential :

Definition

Magnetic Vector Potential ()

In magnetostatics, we enforce the Coulomb gauge condition:

Using the vector identity , Ampere's law transforms into the Vector Poisson's Equation:

In Cartesian coordinates, this decomposes into three independent scalar Poisson equations:

For localized source distributions in free space:

Theorem

Magnetic Flux in Terms of Vector Potential

The total magnetic flux passing through an open surface bounded by perimeter contour can be calculated directly by integrating around the boundary curve :

This converts a two-dimensional surface flux integral into a one-dimensional line integral.

Magnetic Scalar Potential ()

In regions completely free of conduction or convection currents ():

Because the field is curl-free in this sub-region, can be expressed as the gradient of a magnetic scalar potential :

Taking the divergence in a homogeneous medium:

Limitation: is not single-valued along any closed path that encloses electric current, because .


3.7 Magnetic properties of material medium

Macroscopic magnetic phenomena originate from microscopic atomic magnetic moments produced by electron orbital motion and intrinsic electron spin:

Classification of Magnetic Materials
Material ClassMicroscopic MechanismRelative Permeability Magnetic Susceptibility Representative Examples
DiamagneticNo permanent atomic dipoles; an applied field induces opposing orbital magnetic moments (Lenz's law).
()
Very small negative
()
Copper, Bismuth, Silicon, Gold, Water
ParamagneticAtoms possess permanent dipoles randomly oriented by thermal agitation; an applied field weakly aligns dipoles along .
()
Small positive
()
Aluminum, Platinum, Tungsten, Air
FerromagneticQuantum mechanical exchange forces cause spontaneous parallel alignment of dipoles into macroscopic magnetic domains.
(, non-linear)
Very large positive, field-dependentIron, Cobalt, Nickel, Ferrites

3.8 Magnetic force, magnetic torque, magnetic moment, magnetic dipole, magnetization

Magnetic Force on Charges and Currents

Definition

Lorentz Force and Current Forces

  1. Lorentz Force on a Moving Charge:

The pure magnetic force is . Crucial Property: Because , the instantaneous mechanical power delivered by a magnetic field is zero:

A static magnetic field alters the trajectory direction of a moving charge but never changes its kinetic energy or speed.

  1. Magnetic Force on a Current Element:

Magnetic Dipole Moment and Torque

A planar closed loop of area carrying current constitutes an electric current dipole:

where is the right-hand unit normal to the loop area.

Magnetization and Bound Currents

Definition

Magnetization () and Bound Currents

  1. Magnetization Vector (): The volume density of microscopic magnetic dipole moments:
  1. Bound (Amperian) Current Densities:
    • Bound Volume Current Density: ()
    • Bound Surface Current Density: ()
  2. Total Field in a Magnetic Medium:

where is the magnetic susceptibility and is the relative permeability.


3.9 Magnetic boundary condition

At the interface separating two media with distinct permeabilities and , the fundamental laws and establish the boundary relations:

Theorem

Magnetic Boundary Conditions

Let denote the unit vector perpendicular to the interface pointing from Medium 1 into Medium 2:

  1. Normal Flux Continuity (from ): The normal component of magnetic flux density is continuous across any physical boundary:

In terms of magnetic field intensity: .

  1. Tangential Field Discontinuity (from ): The tangential component of is discontinuous across the interface by the linear free surface current density :
  1. Law of Refraction for Magnetic Flux Lines (for ):

where and are the angles made by field vectors with the interface normal.


Worked Examples

Example 3.4

3.4

A magnetic vector potential in free space is given by:

  1. Find the magnetic flux density and its magnitude at point .
  2. Verify that everywhere.
  3. Compute the total magnetic flux passing through the square region , in the plane with normal .

Evaluating the curl :

Evaluating the three components:

Thus:

Evaluating at point :

Its magnitude is:

Verifying :

Computing magnetic flux through the square region in : On , , so :

Answer:
  1. At point : , with magnitude .
  2. is identically satisfied everywhere.
  3. Total magnetic flux: .
Example 3.5

3.5

A rectangular planar loop of wire of dimensions lies in the plane centered at the origin, with its side parallel to the -axis. It carries a counter-clockwise steady current of (looking down the -axis). A uniform external magnetic field exists throughout the region.

  1. Find the magnetic dipole moment of the loop.
  2. Calculate the mechanical torque exerted on the loop.
  3. Compute the potential energy of the dipole in this field.

Evaluating the magnetic dipole moment : The area of the rectangular loop is:

For a counter-clockwise current in the -plane, the right-hand normal is :

Calculating the magnetic torque :

Using cross-product identities and :

Evaluating potential energy :

Answer:
  1. Dipole moment: .
  2. Torque: ().
  3. Potential energy: ().
Example 3.6

3.6

The plane is a planar boundary between Medium 1 (, ) and Medium 2 (, ). The interface is current-free (). In Medium 1, the magnetic flux density is .

  1. Find and its magnitude in Medium 2.
  2. Determine the angles and that the field vectors make with the normal .

Decomposing into normal and tangential components: The unit normal directed from Medium 2 to Medium 1 is .

Applying boundary conditions at :

  1. Normal continuity:
  1. Tangential continuity ():

Thus:

Its magnitude is:

Calculating refraction angles:

Notice that , confirming the law of refraction.

Answer:
  1. , with magnitude .
  2. Refraction angles: and .

Exercises

Exercise — Vector Potential, Magnetic Forces, and Boundary Conditions

Question 1

A magnetic vector potential in cylindrical coordinates is given by .

  1. Derive the magnetic flux density .
  2. Verify that this potential produces the known field of an infinitely long straight wire carrying current along the -axis.

Evaluating the curl in cylindrical coordinates: The vector potential has only a -component that depends solely on radial distance :

In cylindrical coordinates, the curl of a -directed vector depending only on is:

Computing the derivative:

Substituting into the curl:

Verifying against Ampere's law: Dividing by gives the magnetic field intensity:

This matches the exact magnetic field intensity obtained from Ampere's circuital law and Biot–Savart's law for an infinitely long straight filament carrying current .

Answer:

which identically matches the standard field of an infinite straight conductor carrying current .

Question 2

Two very long parallel conductors separated by distance in air carry currents and in opposite directions.

  1. Determine the magnetic force per unit length exerted between the two conductors.
  2. State whether the force is attractive or repulsive.

Evaluating the magnetic field produced by conductor 1 at the location of conductor 2: Conductor 1 carries current . At distance :

Calculating the magnetic force per unit length on conductor 2: Using the force equation , the force magnitude per unit length is:

Substituting values:

Determining force nature: By the right-hand rule, anti-parallel (opposite) currents experience mutual magnetic repulsion.

Answer:
  1. Force per unit length: ().
  2. The force is repulsive.
Question 3

A solid cylinder of magnetic material of radius and infinite length has its axis along the -axis. The magnetization inside the cylinder is given by for .

  1. Determine the bound volume current density inside the cylinder.
  2. Determine the bound surface current density on the outer cylindrical surface .

Evaluating the bound volume current density : In cylindrical coordinates, because :

At the outer boundary :

Evaluating the bound surface current density : On the outer surface , the outward normal is :

Substituting :

Answer:
  1. Bound volume current density: .
  2. Bound surface current density: ().
Question 4

The plane is a charge-free and current-free boundary between Region 1 (, ) and Region 2 (, ). The magnetic field intensity in Region 1 is .

  1. Find and its magnitude in Region 2.
  2. Determine the refraction angle in Region 2 if the field in Region 1 makes an angle with the interface normal .

Decomposing into normal and tangential components: Normal is :

Applying boundary conditions at :

  1. Tangential continuity ():
  1. Normal continuity:

Thus:

Its magnitude is:

Evaluating refraction angle :

By the law of refraction:

Answer:
  1. , with magnitude .
  2. Refraction angles: and .
Question 5

Compare the magnetic vector potential with the electrostatic scalar potential . Explain the necessity of the Coulomb gauge condition (), and prove that the total magnetic flux linking a closed circuit equals the line integral of around the circuit.

Comparing and :

  • Electrostatic Scalar Potential : Defined via , enabled because static electric fields are irrotational (). It represents mechanical work done per unit charge, is a single scalar quantity, and satisfies Poisson's equation .
  • Magnetic Vector Potential : Defined via , enabled because magnetic fields are solenoidal (). It is a vector field aligned with the source current density , with units of ().

Necessity of the Coulomb Gauge Condition: By Helmholtz's theorem, a vector field is uniquely specified only when both its curl and its divergence are defined. Specifying only fixes up to the gradient of an arbitrary scalar field (since ). To uniquely fix and simplify the vector identity in magnetostatics, we enforce the Coulomb gauge:

This decouples the vector wave equation into the simple vector Poisson's equation .

Proving : By definition, the magnetic flux through an open surface bounded by circuit contour is:

Substituting :

Applying Stokes's theorem directly converts this surface integral into the circulation of around the bounding contour :

This proves that the total magnetic flux linking any circuit equals the line integral of the vector potential around the circuit.

Answer:

is a scalar describing irrotational fields (), while is a vector describing solenoidal fields (). The Coulomb gauge uniquely specifies and simplifies the field equations to . Applying Stokes's theorem to proves .

← Magnetic Field (part 1: 3.1–3.5)Time Varying Fields →