Time Varying Fields
Open in the Padhaiko app4.1 Faraday’s law, transformer EMF, motional EMF
Static electric fields are generated by stationary charges (), and static magnetic fields are produced by steady currents (, ). When fields vary with time, electric and magnetic phenomena become coupled: a changing magnetic field creates an electric field (Faraday's law), and a changing electric field generates a magnetic field (Maxwell's displacement current).
Faraday's Law of Electromagnetic Induction
In 1831, Michael Faraday discovered that an electromotive force (EMF) is induced in any closed conducting circuit when the magnetic flux linking that circuit changes with time.
Faraday's Law and Lenz's Law
The electromotive force induced in a closed loop equals the negative time rate of change of magnetic flux linking the loop:
For an -turn tightly wound coil:
where is the magnetic flux linkage (in ). Lenz's Law (Negative Sign): The induced EMF always opposes the change in magnetic flux that produces it. The induced current generates its own magnetic field directed to resist any increase or decrease in the primary linking flux.
Transformer EMF, Motional EMF, and Combined Induction
The total induced electromotive force around a closed contour can arise from three distinct physical situations:
| Induction Mechanism | Physical System | Mathematical Formulation | Induced EMF Expression |
|---|---|---|---|
| Transformer EMF () | Stationary loop ( fixed) in a time-varying magnetic field | Loop area constant; field varies with time | |
| Motional EMF () | Conductor moving with velocity in a static magnetic field | Charge carriers experience magnetic Lorentz force | |
| Combined EMF () | Moving loop () in a time-varying magnetic field | Both flux density and loop geometry vary simultaneously |
Point Form of Faraday's Law
Expressing the transformer EMF in terms of the induced electric field along loop :
Applying Stokes's theorem to the left-hand side:
Because this holds for any arbitrary surface :
This is Maxwell's third equation in differential form. It shows that time-varying magnetic fields produce non-conservative (vortical) electric fields.
4.2 Displacement current
Inconsistency of Ampere's Law for Dynamic Fields
Ampere's circuital law for static fields is:
Taking the divergence of both sides:
However, from the fundamental law of conservation of charge (continuity equation):
For time-varying fields, , so . This created a severe mathematical and physical contradiction: while .
Maxwell's Modification and Displacement Current Density
To resolve this inconsistency, James Clerk Maxwell utilized Gauss's law :
Displacement Current Density
Maxwell postulated that the time-varying electric displacement flux acts as a virtual current source called the displacement current density :
The total current density is the sum of conduction current density and displacement current density :
The total displacement current passing through surface is:
4.3 Maxwell’s equations in integral and point forms
James Clerk Maxwell unified all classical electric and magnetic phenomena into four fundamental field equations:
| Differential (Point) Form | Integral Form | Physical Law & Principle |
|---|---|---|
| Gauss's Law for Electricity: Electric flux originates and terminates on free electric charges. | ||
| Gauss's Law for Magnetism: Absence of isolated magnetic monopoles; magnetic flux lines are continuous closed loops. | ||
| Faraday's Law: A time-varying magnetic flux induces a circulating, non-conservative electric field. | ||
| Ampere–Maxwell Law: Magnetic fields are produced by both conduction currents and time-varying electric displacement fields. |
Constitutive Relations and Phasor Representations
To solve Maxwell's equations in material media, they are paired with the constitutive relations:
For sinusoidally time-varying (time-harmonic) fields with angular frequency ( convention, ):
Worked Examples
4.1
A conducting rod of length slides horizontally along two frictionless parallel conducting rails in the -plane at constant velocity . The rails are separated by along the -axis and connected at by a fixed resistor . A time-varying magnetic field exists throughout the region. At the instant the rod passes :
- Calculate the motional EMF and the transformer EMF .
- Determine the total induced electromotive force and the instantaneous current through the resistor.
Formulating the enclosed magnetic flux : At time , the sliding bar is at position . The rectangular loop area bounded by the resistor, rails, and rod is:
The magnetic flux linking the loop is:
Evaluating the total EMF using Faraday's law: By the chain rule:
Here:
- Motional component:
- Transformer component:
Evaluating at position : At :
The total induced EMF is:
Calculating the instantaneous loop current:
- Motional EMF: ; Transformer EMF at : .
- Total EMF: ; Current: .
4.2
A parallel-plate capacitor with circular electrodes of radius separated by a distance is filled with a dielectric of relative permittivity . An alternating voltage is applied across the plates.
- Find the capacitance and the conduction current in the connecting wires.
- Calculate the displacement current density and the total displacement current between the plates.
- Compute the induced magnetic field intensity between the plates at radius .
Evaluating capacitance and wire conduction current : Plate area .
With angular frequency :
Evaluating displacement current density and total displacement current : The uniform electric field between the plates is:
Displacement current density:
Total displacement current through the dielectric cross-section:
Notice that , verifying that displacement current preserves complete current continuity across the capacitor plates.
Evaluating induced magnetic field between the plates at : Applying the Ampere–Maxwell circuital law to a circle of radius :
- Capacitance: ; conduction current: .
- ; total displacement current: .
- Induced magnetic field at : .
4.3
In a source-free region of free space (), the electric field of an electromagnetic wave is given by:
- Using Maxwell's equations, determine the phase constant .
- Find the corresponding magnetic field intensity .
- Compute the displacement current density .
Finding from the electromagnetic wave equation in free space: In source-free free space, Maxwell's equations yield the wave equation:
Evaluating spatial and temporal derivatives:
Substituting into the wave equation gives the dispersion relation:
Evaluating using Faraday's law:
Since :
Integrating with respect to time:
Using intrinsic impedance :
Evaluating the displacement current density :
Using :
- Phase constant: .
- Magnetic field: .
- Displacement current density: .
Exercises
Exercise — Time-Varying Fields and Maxwell's Equations
An airplane with a metal wingspan of flies horizontally due north at a cruising speed of . In that region, the vertical component of the Earth's magnetic field points downward with a magnitude of .
- Calculate the motional electromotive force induced between the wingtips.
- Determine which wingtip is at higher electrical potential.
Converting velocity to SI units:
Evaluating induced motional EMF:
Substituting values:
Determining polarity via the right-hand rule: The velocity is directed North (), and the vertical magnetic field is directed downward ().
Positive charges are pushed toward the East (starboard/right wingtip), so the East (starboard) wingtip is at the higher electrical potential.
- Induced EMF: ().
- The East (starboard) wingtip is at higher potential.
In sea water (, , ), a sinusoidal electric field is established.
- Determine the ratio of the conduction current density magnitude to the displacement current density magnitude () at (a) and (b) .
- Calculate the crossover frequency at which the conduction current density equals the displacement current density.
Formulating the current density ratio: Conduction current density magnitude: . Displacement current density magnitude: . The ratio is:
Evaluating at and :
- At :
Sea water behaves as a near-perfect conductor at audio frequencies.
- At :
Conduction and displacement currents are comparable at microwave frequencies.
Evaluating crossover frequency : Setting :
- (a) At : ; (b) At : .
- Crossover frequency: .
In free space, a uniform plane wave has an electric field intensity given by:
- Find the phase constant , wavelength , and frequency .
- Determine the corresponding magnetic field intensity vector .
Evaluating wave propagation parameters: Angular frequency . In free space ():
Determining magnetic field intensity : For a forward-propagating transverse electromagnetic wave along :
The amplitude is:
Thus:
- , , .
- .
A square flat coil consisting of of side length rotates at a constant speed of inside a uniform magnetic field oriented perpendicular to the rotation axis.
- Derive the equation for the instantaneous induced electromotive force .
- Calculate the peak induced EMF and the RMS voltage .
Evaluating angular velocity and loop area: Coil area:
Angular velocity:
Deriving induced EMF : The magnetic flux linking the -turn coil at angle is:
By Faraday's law:
Calculating peak and RMS values: Peak induced EMF:
RMS voltage:
- .
- Peak EMF: ; RMS voltage: .
Explain why Ampere's circuital law is mathematically incompatible with the continuity equation for time-varying fields, detail Maxwell's displacement current modification, and summarize all four Maxwell's equations in differential form.
Incompatibility with Continuity Equation: Taking the divergence of the static Ampere's law:
Because the divergence of any vector curl is identically zero, this requires . However, the fundamental law of conservation of charge requires:
For time-varying electromagnetic fields, , creating a direct contradiction between static Ampere's law and charge conservation.
Maxwell's Resolution via Displacement Current: Using Gauss's law :
Rearranging yields:
Maxwell resolved the contradiction by defining the displacement current density , ensuring the divergence of total current is always zero:
Summary of Maxwell's Equations in Differential Form:
- Gauss's Law for Electricity:
- Gauss's Law for Magnetism:
- Faraday's Law:
- Ampere–Maxwell Law:
Static Ampere's law yields , violating the continuity equation . Maxwell added the displacement current density to restore charge conservation. The four differential equations are: , , , and .