Transmission Lines
Open in the Padhaiko app6.1 Transmission line equations (Taking analogy from wave equations)
A transmission line is a two-conductor structure (coaxial cable, twin-wire, microstrip) that guides a wave from a source to a load. When the line is comparable to a wavelength, voltage and current vary along and the line must be treated as a distributed circuit, not a lumped one.
Distributed parameters
Primary Constants (per unit length)
Every short length of the line is modelled by a series impedance and a shunt admittance , where
- = series resistance of the conductors (),
- = series inductance (),
- = shunt conductance of the dielectric leakage (),
- = shunt capacitance between the conductors ().
Write and for the series impedance and shunt admittance per metre.
Telegrapher's equations and wave equations
Applying Kirchhoff's voltage and current laws to the length and letting (phasor form):
Differentiating once more and eliminating (or ) gives the transmission line wave equations:
General Solution, Propagation Constant and Characteristic Impedance
The first term is the wave travelling toward (towards the load), the second is the reflected wave travelling toward . is the attenuation constant (Np/m) and the phase constant (rad/m).
Analogy with plane waves
| Plane wave (Chapter 5) | Transmission line (Chapter 6) |
|---|---|
| Electric field | Voltage |
| Magnetic field | Current |
| with | with |
| Intrinsic impedance | Characteristic impedance |
| , , | has no field analogue (conductor loss) |
6.2 Lossless, lossy and distortionless transmission lines
| Property | Lossless () | Distortionless () | General lossy |
|---|---|---|---|
| (Np/m) | , independent of | depends on | |
| (rad/m) | not linear in | ||
| (real) | (real) | complex, depends on | |
| Phase velocity | depends on (dispersion) |
6.3 Input impedance, reflection coefficient, standing wave ratio
Consider a lossless line of characteristic impedance terminated in a load at . Let be the distance from the load toward the source.
Reflection Coefficient, SWR and Input Impedance
- Load reflection coefficient:
- At distance from the load: (the magnitude does not change on a lossless line, only the phase rotates).
- Standing wave ratio:
- Input impedance looking into the line a distance from the load:
For a lossy line replace by and by in the last formula.
Special terminations and lengths
| Case | Condition | Result |
|---|---|---|
| Matched load | , , for any (no reflection) | |
| Short circuit | , , | |
| Open circuit | , , | |
| Half-wave line | (line repeats the load) | |
| Quarter-wave line | (impedance inverter, used for matching) | |
| Measuring | short and open tests |
Worked Examples
6.1
A lossless line has and . At find the characteristic impedance , the phase velocity , the phase constant and the wavelength .
Characteristic impedance. For a lossless line :
Phase velocity.
Phase constant and wavelength.
, , , .
6.2
A line has , and . (a) Find so that the line is distortionless. (b) Find the attenuation constant . (c) By what factor does the voltage amplitude fall over , and how many dB is that?
Distortionless condition gives
Attenuation constant. For a distortionless line
Loss over 500 m. The voltage amplitude decays as :
In decibels, .
, , voltage ratio (attenuation ).
6.3
A lossless line is terminated in . Find (a) the load reflection coefficient, (b) the SWR, (c) the input impedance at a distance from the load, and (d) the input impedance if instead the line is long.
Reflection coefficient at the load.
Standing wave ratio.
Input impedance at . Here , so :
since , so the denominator is . Hence
Quarter-wave line. The line inverts the load impedance:
(), , , .
Exercises
Exercise — Transmission Lines
Starting from the propagation constant , derive the condition for a distortionless line and show that then , and .
Impose the condition. Let . Then
Propagation constant.
Since , we get and . The attenuation is independent of frequency and is linear in (so is constant), which means no distortion.
Characteristic impedance.
which is real and independent of frequency.
Distortionless condition: ; then , , .
A lossless line has and phase velocity . Find and per metre, and the wavelength at .
Two relations. For a lossless line and . Multiplying and dividing them gives
Numbers.
Wavelength at 50 MHz.
, , .
A telephone line has, per kilometre, , , and . At find (so and ), the phase velocity, and the attenuation over a run in dB.
Series impedance and shunt admittance with :
Propagation constant.
So and .
Phase velocity and attenuation.
, , attenuation over .
A lossless line feeds a purely resistive load . (a) Find and the SWR. (b) What fraction of the incident power is reflected? (c) Design a quarter-wave transformer to match the load to the line.
Reflection coefficient and SWR.
Reflected power. The fraction is , i.e. of the incident power.
Quarter-wave transformer. A line of length and impedance gives . For a match this must equal :
Check: . Insert this section between the main line and the load.
, ; of the power is reflected; the transformer is a section with .
A lossless line of length measures with its far end short-circuited and with it open-circuited. Find the characteristic impedance and the electrical length .
Characteristic impedance. Since and , their product is :
Electrical length.
Check with the open-circuit value: , as measured.
and (, i.e. ).