Plane Waves (part 2: 5.4–5.6)
Open in the Padhaiko app5.4 Reflection of plane wave at normal incidence
When a uniform plane wave propagating in one medium strikes a planar interface with a second medium, a portion of the incident energy is reflected back into the first medium, and the remaining portion is transmitted into the second medium. The quantitative partition of field amplitudes is governed by the electromagnetic boundary conditions.
Incident, Reflected, and Transmitted Wave Fields
Consider a uniform plane wave traveling in Medium 1 () in the direction, striking a planar boundary at separating it from Medium 2 ():
Field Representations at Normal Incidence
- Incident Wave (, propagating in ):
- Reflected Wave (, propagating in ): Because the reflected wave propagates backward (), the Poynting vector must point along , reversing the sign of :
- Transmitted Wave (, propagating in ):
Reflection and Transmission Coefficients
Applying boundary conditions at the planar interface :
- Continuity of tangential electric field:
- Continuity of tangential magnetic field (for ):
Reflection and Transmission Coefficients
Solving these boundary equations yields the reflection coefficient and transmission coefficient :
Key relations:
- Amplitude Identity:
- Power Conservation: The fraction of power reflected (reflectance ) and transmitted (transmittance ) satisfy:
Total Reflection at a Perfect Conductor (PEC)
For a perfect electric conductor as Medium 2 ():
- The incident wave is reflected with a phase reversal ().
- Zero electromagnetic energy penetrates into the conductor ().
5.5 Standing wave and SWR
When a wave is partially or totally reflected at an interface, the forward-traveling incident wave and the backward-traveling reflected wave interfere to create a standing wave pattern in Medium 1.
Total Reflection and Pure Standing Waves
In a lossless medium () terminating on a perfect conductor ():
In the real time domain:
Partial Reflection and Standing Wave Ratio (SWR)
When Medium 2 is a dielectric (), the interference pattern features non-zero minima:
Standing Wave Ratio (SWR or )
The Standing Wave Ratio (SWR, denoted ) is the ratio of maximum to minimum electric field amplitude in the standing wave pattern:
Inverting this expression gives the magnitude of the reflection coefficient:
- Matched Load (): (no standing wave, pure traveling wave).
- Total Reflection (PEC or open): (pure standing wave).
5.6 Input intrinsic impedance
In multi-layered dielectric structures (such as radomes, optical thin-film anti-reflective coatings, or dielectric window panels), we determine wave transmission by calculating the input intrinsic impedance looking into a layered medium at an arbitrary distance in front of the interface.
Generalized Input Impedance Formula
Let an interface be located at , with an incident wave arriving from the negative half-space. At distance in front of the boundary:
Input Intrinsic Impedance Formula
The ratio of total transverse electric field to total transverse magnetic field at distance in front of the boundary defines the input intrinsic impedance :
Substituting and applying Euler's formulas yields the transmission-line analog:
Quarter-Wave Transformer and Half-Wave Spacer
| Structure | Length Condition | Input Impedance | Engineering Application |
|---|---|---|---|
| Quarter-Wave Transformer | () | Impedance Matching / Anti-Reflection: Setting gives , eliminating reflections completely. | |
| Half-Wave Spacer | () | Transparent Windows / Radomes: A dielectric layer of thickness replicates the load impedance exactly, causing zero net reflection. |
Worked Examples
5.4
A uniform plane wave in Region 1 (, ) is normally incident on a planar interface at with Region 2 (, ). The incident electric field amplitude is .
- Find the intrinsic impedances and .
- Calculate the reflection coefficient , transmission coefficient , and standing wave ratio .
- Determine the reflected and transmitted electric field amplitudes.
- Verify conservation of power by computing the reflectance , transmittance , and power densities.
Evaluating intrinsic impedances and :
Evaluating reflection coefficient , transmission coefficient , and SWR :
Notice that . The standing wave ratio is:
Evaluating field amplitudes:
Verifying power conservation: Reflectance:
Transmittance:
Incident power density:
Reflected power density:
Transmitted power density:
- , .
- , , .
- Reflected: ; Transmitted: .
- Reflectance , Transmittance , with .
5.5
A uniform plane wave in free space with frequency and electric field amplitude is normally incident on a perfectly conducting wall located at . The wave propagates in the direction with polarized along the -axis.
- Write expressions for the total instantaneous electric and magnetic field vectors in Region 1 ().
- Determine the locations of all nodal and antinodal planes of the electric field in front of the conductor.
- Compute the peak surface current density induced on the face of the conductor.
Evaluating wave parameters in free space: Angular frequency: . Phase constant: . Wavelength: . Intrinsic impedance: .
Formulating total standing wave fields: At a perfect conductor, . The superposition of incident and reflected waves gives:
Numerically, .
Locating electric field nodes and antinodes ():
- Nodal Planes ():
Nodes occur at
- Antinodal Planes ():
Antinodes occur at
Computing surface current density on conductor face (): The boundary condition at a perfect conductor is , where is the unit normal pointing into the conductor:
Peak surface current density:
- , .
- Nodes: (); Antinodes: (peak ).
- Peak surface current density: .
5.6
Design an optical/microwave anti-reflection coating (quarter-wave transformer) at frequency to match free space (Region 0, ) to a glass substrate (Region 2, , ).
- Determine the required relative permittivity and intrinsic impedance of the coating material.
- Calculate the required physical thickness of the coating layer.
- Verify that the input intrinsic impedance at the front face of the coating matches free space.
Determining coating material properties: Intrinsic impedances of outer media:
For a quarter-wave matching transformer:
For non-magnetic materials (), this implies:
Calculating physical thickness of the quarter-wave layer: Phase velocity in the coating:
Wavelength in the coating at :
The required layer thickness is one-quarter of a wavelength:
Verifying input intrinsic impedance: For a quarter-wave layer ():
Because , the reflection coefficient at the air-coating interface is:
This eliminates all wave reflection, achieving transmission into the glass substrate.
- Coating properties: and .
- Coating thickness: .
- Input impedance: , giving (zero reflection).
Exercises
Exercise — Reflection, Standing Waves, and SWR
A uniform plane wave in air () impinges normally on a lossless dielectric medium with and . The incident wave has an average power density of .
- Calculate the reflection coefficient and the standing wave ratio in air.
- Determine the average power density reflected back into air and the average power density transmitted into the dielectric.
Evaluating intrinsic impedance of Region 2 and reflection coefficient:
Evaluating the standing wave ratio in air:
Calculating reflected and transmitted power densities: Reflectance:
Transmittance:
Reflected power density:
Transmitted power density:
- and .
- Reflected power density: ; Transmitted power density: .
A standing wave pattern measured in a lossless medium with phase constant exhibits a maximum electric field amplitude of and a minimum electric field amplitude of .
- Find the standing wave ratio and the magnitude of the reflection coefficient .
- Calculate the incident electric field amplitude and reflected field amplitude .
- Determine the distance between adjacent electric field minima.
Evaluating SWR and reflection coefficient magnitude:
Evaluating incident and reflected amplitudes: From :
Evaluating distance between adjacent minima: Wavelength in the medium:
Adjacent minima are separated by one-half wavelength:
- and .
- Incident amplitude: ; Reflected amplitude: .
- Distance between adjacent minima: ().
A dielectric radome of relative permittivity and non-magnetic permeability () is designed with thickness to terminate into a receiver whose input impedance is .
- Calculate the intrinsic impedance of the radome material.
- Determine the input intrinsic impedance seen at the front face of the radome.
Evaluating intrinsic impedance of the radome material:
Evaluating input intrinsic impedance for quarter-wave thickness: For a quarter-wave layer ():
- Radome intrinsic impedance: .
- Input intrinsic impedance: .
A plane wave in air () strikes normally on a lossy material possessing a complex intrinsic impedance .
- Calculate the complex reflection coefficient and its magnitude .
- Determine the standing wave ratio established in air.
Evaluating complex reflection coefficient :
Evaluating magnitudes:
Evaluating phase angle:
Thus:
Evaluating standing wave ratio :
- , with magnitude .
- Standing wave ratio: .
Prove the conservation of electromagnetic power () for a uniform plane wave normally incident upon the planar boundary between two lossless dielectric media, starting from the boundary conditions for electric and magnetic fields.
Setting up boundary equations and definitions: At normal incidence on a planar boundary between Medium 1 () and Medium 2 ():
- Tangential electric field continuity:
- Tangential magnetic field continuity:
Relating reflection and transmission coefficients to power densities: For lossless media, the time-average power densities are:
Reflectance and Transmittance .
Multiplying boundary equations: Multiplying equation (1) by equation (2):
Expanding both sides:
Rearranging:
This rigorously proves that the sum of reflected and transmitted power densities equals the incident power density, satisfying the conservation of energy.
Multiplying by yields , proving .