PadhaikoAll subjects

Instrumental Drawing, Technical Lettering Practices and Techniques

Engineering Drawing (ENME 101)

Open in the Padhaiko app

1.1 Equipment, materials and drawing sheets

Engineering drawing is the universal graphical language of engineers. To produce crisp, accurate, and reproducible drawings that conform to ISO (International Organization for Standardization) and BIS (Bureau of Indian Standards, SP 46) conventions, the drafter relies on standardized drawing boards, sheets, layout borders, and title blocks.

Standard Drawing Sheet Sizes (ISO 216 A-Series)

The basic drawing sheet is the A0 size, whose surface area is 1 square metre (1000000 sq mm) and whose sides follow the aspect ratio 1 : sqrt(2) (approximately 1 : 1.4142). Each smaller size in the series is obtained by halving the longer dimension of the preceding sheet parallel to its shorter side, preserving the exact 1 : sqrt(2) ratio across all sizes.

Standard ISO A-Series Drawing Sheet Dimensions
DesignationTrimmed Size (Width x Height, mm)Untrimmed Size (mm)Approximate Area (sq m)Typical Application
A0841 x 1189880 x 12301.000Large assembly drawings, civil site plans
A1594 x 841625 x 8800.500General engineering assemblies, classroom boards
A2420 x 594450 x 6250.250Standard college drawing sheets, sub-assemblies
A3297 x 420330 x 4500.125Detail drawings, folded prints in project reports
A4210 x 297240 x 3300.0625Small component sketches, specification sheets

Sheet Layout: Borders, Margins, Grid, and Title Block

Before any geometry is drawn, the sheet is divided into clear functional zones:

Definition

Standard Sheet Layout Elements

  1. Border and Margins: A rectangular border frame encloses the working drawing area. A wider filing margin of at least 20 mm is kept on the left edge (for binding or punching), while the top, bottom, and right margins are 20 mm for A0–A1 sheets and 10 mm for A2–A4 sheets.
  2. Grid Reference System (Zoning): On larger sheets (A0–A2), borders are divided into numbered columns (1, 2, 3, ...) along horizontal edges and lettered rows (A, B, C, ...) along vertical edges so features can be located quickly by grid coordinates (for example, Zone B4).
  3. Orientation and Centring Marks: Four short heavy lines drawn across the border at the midpoints of all four edges aid in aligning sheets on microfilm cameras or printing presses.
  4. Title Block: Positioned permanently in the bottom-right corner of the drawing frame (standard size 185 mm x 65 mm or 170 mm x 65 mm). It records the drawing title, drawing number, scale, projection symbol (First Angle or Third Angle), unit of measurement, institution/firm name, drafter name, checker signature, and date.
Standard Drawing Sheet Layout (Landscape A2 / A3)Text
+-------------------------------------------------------------------+
|  20 mm                 10 mm top margin                           |
|  left    +----------------------------------------------------+   |
|  filing  |                                                    | 1 |
|  margin  |                                                    | 0 |
|          |              WORKING DRAWING AREA                  | m |
|          |                                                    | m |
|          |                                                    |   |
|          |                                +-------------------+   |
|          |                                |    TITLE BLOCK    |   |
|          |                                | (185 mm x 65 mm)  |   |
|          +--------------------------------+-------------------+   |
|                        10 mm bottom margin                        |
+-------------------------------------------------------------------+

1.2 Description of drawing instruments, auxiliary equipment and drawing materials

Accurate manual drafting depends on selecting the right instrument for each geometric task and keeping materials in good working order.

Essential Drawing Instruments and Their Functions
InstrumentDescriptionPrimary Function
Drawing BoardWell-seasoned softwood (pine or basswood) strips battened at the back to prevent warping, with a hard ebony working edge on the leftProvides a flat, true surface and a straight guiding edge for the T-square stock
T-SquareHardwood or transparent acrylic blade fastened rigidly at 90 degrees to a thicker stock (head)Draws horizontal parallel lines and serves as a base edge to support set squares
Set Squares (Triangles)Two transparent celluloid right triangles: 45-45-90 degree and 30-60-90 degreeDraws vertical lines and angles of 30, 45, 60, 15, 75, and 105 degrees when resting on the T-square
Mini-DrafterParallelogram linkage carrying two mutually perpendicular scales with a 360-degree protractor head clamped to the top-left of the boardCombines T-square, set squares, protractor, and scale into a single rapid drafting tool
Scale (Engineer's / Metric)Wood, plastic, or anodized aluminium ruler with beveled edges (flat or triangular cross-section) graduated in mm and standard reduction/enlargement ratiosTransfers full-size, reduced, or enlarged linear dimensions accurately onto paper
ProtractorSemicircular (180 degrees) or circular (360 degrees) transparent disc graduated in 1-degree or 0.5-degree divisionsMeasures and lays out arbitrary angles not directly obtainable with set squares
Large Bow / Plain CompassHinged two-legged instrument: one leg holds an adjustable shouldered needle point, the other holds a lead chuck or pen attachment (with lengthening bar for large radii)Draws circles and circular arcs of radii typically from 15 mm up to 150 mm (or larger with bar)
Drop-Bow CompassSmall spring-bow compass where the center rod stays vertical while the lead leg rotates around itDraws very small circles (rivets, fillets, small holes of radius 1 mm to 10 mm) cleanly
DividersSimilar to a compass, but both legs terminate in hardened steel needle points (plain or hairspring bow)Transfers distances from scales/views and steps off equal divisions along lines or arcs
French Curves & Flexible CurveMolded transparent plastic templates with varying non-circular radii, or a lead-core flexible stripDraws smooth, continuous curves (ellipses, parabolas, involutes, cam profiles) through plotted points
Technical (Inking) PensTubular-nib capillary-feed pens (e.g., 0.18, 0.25, 0.35, 0.5, 0.7 mm ISO line widths)Produces uniform-width permanent waterproof ink drawings for reproduction

Auxiliary Equipment and Drawing Materials


1.3 Techniques of instrumental drawing

Good engineering drawings combine geometric accuracy with clear visual contrast between line weights and legible, uniform lettering.

Order of Penciling (Drafting Workflow)

Professional drafting follows a strict sequence so earlier construction marks do not get smudged by later work and every feature is located from common datums:

  1. Sheet Setup and Border: Secure the sheet, draw border lines and title block outline lightly using a 2H pencil.
  2. Primary Centerlines and Axes: Lay out horizontal and vertical centerlines, axes of symmetry, and datum planes (2H pencil).
  3. Construction and Blocking-In: Sketch overall bounding boxes and light construction geometry for all views simultaneously.
  4. Arcs and Circles First: Darken all circles, fillets, and rounded corners (HB/H) before drawing straight tangent lines—it is far easier to blend a straight line neatly into an arc than to fit an arc onto existing straight lines.
  5. Visible Straight Lines: Darken horizontal outlines from top to bottom, then vertical lines from left to right, then inclined lines (HB pencil).
  6. Hidden and Section Lines: Add dashed hidden lines and thin 45-degree hatching lines (H or 2H).
  7. Dimensioning and Notes: Draw extension lines, dimension lines, arrowheads, numerical values, and annotations.
  8. Title Block Completion: Fill in all lettering inside the title block last, when the rest of the sheet is clean.

Technical Lettering Practices (ISO 3098 / BIS SP 46)

Technical lettering uses single-stroke Gothic letters—meaning each stroke is made with one uniform pass of the pencil/pen tip without serifs or ornamental flourishes. Both vertical (90 degrees to baseline) and inclined (slanted 75 degrees to the right from the baseline) styles are standard, though a drawing should use only one style consistently.

ISO 3098 Standard Lettering Heights and Proportions
FeatureType A (Narrow, d = h/14)Type B (Standard, d = h/10)Practical Rule
Letter Height (h)2.5, 3.5, 5, 7, 10, 14, 20 mm2.5, 3.5, 5, 7, 10, 14, 20 mmTitles: 7–10 mm; Subtitles: 5 mm; Dimensions/Notes: 3.5 mm
Lowercase Body Height (c)(10/14) h(7/10) hRoughly two-thirds of uppercase height h
Stroke Thickness (d)h / 14h / 10Match pencil/pen tip width to h/10 for crisp contrast
Space Between Characters (a)2d = (2/14) h2d = (2/10) hKeep visual area between letters uniform, not fixed center-to-center
Minimum Space Between Words (e)6d = (6/14) h6d = (6/10) hApproximately equal to the width of uppercase letter O or N
Minimum Line Pitch (b)20d = (20/14) h14d = (14/10) hBaseline-to-baseline vertical spacing

1.4 Pencil sharpening, securing paper, proper use of T- squares, triangles, scales dividers, compasses, erasing shields, French curves, inking pens

Mastering physical handling of each instrument prevents smudging, uneven lines, and cumulative angular errors.

Pencil Sharpening and Line Consistency

Securing the Drawing Paper

  1. Place the sheet near the upper-left area of the drawing board (leaving at least 50 mm from the bottom and left edges so the T-square blade rests comfortably on the board).
  2. Slide the T-square stock firmly against the left ebony edge and align the top edge of the sheet parallel with the upper working edge of the T-square blade.
  3. Hold the paper flat with one hand while smoothing outward toward the corners, then fasten all four corners with short strips of drafting tape placed diagonally.

Proper Use of Instruments

Definition

Operating Rules for Standard Drafting Instruments

  1. T-Square: Always keep the stock pressed firmly with the left hand against the left working edge of the board (for right-handed drafters). Never use the T-square against the top, bottom, or right edges of the board, and never cut paper along its blade. Draw horizontal lines from left to right along the upper edge of the blade only.
  2. Triangles (Set Squares): Rest the base of a set square firmly on the upper edge of the T-square blade (never directly against the board edge). Draw vertical lines upward (bottom to top) along the left edge of the triangle so light falls cleanly on the pencil point. Combine the 45-45-90 and 30-60-90 triangles on the T-square to draw 15 degrees (45 - 30) and 75 degrees (45 + 30) lines directly. To draw parallel or perpendicular lines at any arbitrary angle, place one triangle's hypotenuse against the given line, hold the second triangle (or T-square) stationary against another edge as a guide rail, and slide the first triangle along it.
  3. Scales: Place the scale flat along the line to be measured and mark distances with light, short vertical ticks using a sharp 2H/4H pencil (looking straight down to avoid parallax error). Never draw lines directly along a graduated scale edge, and never perform mental conversions when a matching reduction/enlargement scale is available.
  4. Dividers: Hold the divider between thumb and forefinger; do not open or close it with both hands unless setting fine adjustments. When stepping off equal intervals along a straight line or curve, swing the divider alternately to the left and right of the line by pivoting lightly on one needle point—never punch deep holes through the paper.
  5. Compasses: Adjust the steel needle point so it protrudes roughly 0.5–1 mm farther than the sharpened chisel/bevel-cut lead tip (because the needle sinks slightly into the paper). Set the radius from the scale, place the needle lightly at the center, lean the compass slightly forward in the direction of rotation, and spin the knurled top handle clockwise in a single smooth sweep between thumb and forefinger.
  6. Erasing Shields: Align the closest matching slot or aperture over the unwanted line, press the shield flat with the non-dominant hand so it cannot slip, erase across the aperture with a soft vinyl eraser, and sweep away debris with a dusting brush.
  7. French Curves: Plot enough points along the curve lightly, then sketch a faint freehand curve connecting them so you can see the curvature trend. Select a section of the French curve that matches at least four consecutive points. Draw smoothly from the first point to the penultimate matched point (stopping one point early), then reposition the curve so it overlaps the last drawn segment by two points before continuing—this eliminates sharp kinks at joints.
  8. Inking Pens: Hold a technical pen strictly perpendicular (90 degrees) to the paper surface (unlike a pencil) so the full ring of the tubular nib contacts the paper evenly. Keep a slight clearance between the straightedge/triangle and paper (use triangles with stepped/inked bevel edges) so ink does not wick under the ruler by capillary action. Move the pen at a steady, moderate speed without pausing at endpoints (pausing causes ink blobs), and cap the pen immediately after use to prevent dried ink from clogging the needle valve.

1.5 Line: Types and uses, thickness

In engineering drawing, line conventions (ISO 128-20 / BIS SP 46) act as a visual grammar: the thickness and pattern of a line immediately tell the reader whether a feature is a visible edge, hidden interior boundary, axis of symmetry, cutting plane, or dimension reference.

Line Thickness Groups

Two standard line widths are used on most manual and CAD drawings: thick (wide) lines and thin (narrow) lines, maintaining a strict 2 : 1 thickness ratio (thick width = 2 x thin width). Standard line groups are:

Standard Line Types, Proportions, and Applications (ISO 128 / BIS SP 46)
Line TypeVisual PatternThicknessStandard Applications
Type A: Continuous Thick____________________Thick (0.5 / 0.7 mm)Visible outlines, visible edges, border frames
Type B: Continuous Thin____________________Thin (0.25 / 0.35 mm)Dimension lines, extension lines, leader lines, section hatching (45 deg), imaginary lines of intersection, revolved section outlines
Type C: Continuous Thin Freehand~/~/~/~/~/~/~/~/~Thin (0.25 / 0.35 mm)Short break lines (limits of partial or interrupted views/sections)
Type D: Continuous Thin with Zigzags____/\____/\____Thin (0.25 / 0.35 mm)Long break lines (ruled straight with sharp zigzags for long structural members)
Type E / F: Dashed (Thick / Thin)-- -- -- -- -- -- --Thick (E) or Thin (F)Hidden outlines and hidden edges (dashes ~3–4 mm, gaps ~1 mm; Type F thin is standard in mechanical drawing)
Type G: Chain Thin____ _ ____ _ ____ _Thin (0.25 / 0.35 mm)Centerlines, axes of symmetry, pitch circles of gears and bolt-hole patterns, trajectories
Type H: Chain Thin, Thick at Ends & Bends==== _ ____ _ ====Thin body, Thick endsCutting plane lines (section planes; arrows placed at thick ends pointing in viewing direction)
Type J: Chain Thick==== == ==== == ====Thick (0.5 / 0.7 mm)Indication of surfaces or zones requiring special treatment (e.g., surface hardening or coating)
Type K: Chain Thin Double-Dashed____ _ _ ____ _ _ _Thin (0.25 / 0.35 mm)Outlines of adjacent parts, extreme/alternative positions of movable parts, centroidal lines, parts situated in front of cutting plane

Precedence of Coinciding Lines

When two or more different line types fall on the exact same projected position in an orthographic view, only the line with highest priority is drawn:


Worked Examples

Example 1

1

Derive the standard trimmed dimensions of A1, A2, and A3 drawing sheets starting from A0 (841 mm x 1189 mm), verify the aspect ratio and surface area of A0, and state the recommended border margins and title block size for an A2 college sheet.

Verify the A0 area and aspect ratio: Multiply the trimmed width and height of A0 in millimetres and convert to square metres (dividing by 1000000):

  • Area = 841 x 1189 = 999949 sq mm = 0.99995 sq m (approx. 1.00 sq m).
  • Aspect ratio = 1189 / 841 = 1.4138, which matches sqrt(2) = 1.4142 within 0.03%.

Successively halve the longer side (rounding down to the nearest millimetre per ISO 216):

  • A1: Halve 1189 mm -> 594.5 mm -> 594 mm; shorter side remains 841 mm. Size = 594 mm x 841 mm.
  • A2: Halve 841 mm -> 420.5 mm -> 420 mm; shorter side remains 594 mm. Size = 420 mm x 594 mm.
  • A3: Halve 594 mm -> 297 mm; shorter side remains 420 mm. Size = 297 mm x 420 mm.

Specify the A2 sheet layout (landscape orientation):

  • Left (filing) margin: 20 mm.
  • Top, bottom, and right margins: 10 mm each (giving a bordered frame of 564 mm wide by 400 mm high).
  • Title block: 185 mm x 65 mm (or 170 mm x 65 mm) placed in the bottom-right corner inside the border.
Answer:

A1 = 594 x 841 mm, A2 = 420 x 594 mm, A3 = 297 x 420 mm. A0 has area 0.99995 sq m (1 sq m) and aspect ratio 1 : 1.414. For A2, use a 20 mm left margin, 10 mm margins on the remaining three sides, and a 185 x 65 mm bottom-right title block.

Example 2

2

Describe the exact step-by-step instrumental procedure using a T-square and two set squares (45-45-90 and 30-60-90) to: (a) Construct lines inclined at 15 degrees and 75 degrees to the horizontal; and (b) Draw a line parallel to and another line perpendicular to an arbitrary inclined line AB.

(a) Constructing 15-degree and 75-degree lines:

  1. Press the T-square stock firmly against the left ebony edge of the drawing board so its blade is horizontal.
  2. For 75 degrees (45 + 30): Rest the 45-degree edge of the 45-45-90 set square on the T-square blade, then place the 30-degree corner of the 30-60-90 set square flush against the hypotenuse/leg so the two angles add up to 45 + 30 = 75 degrees relative to the horizontal blade. Draw along the outer working edge.
  3. For 15 degrees (45 - 30 or 60 - 45): Rest the 30-60-90 triangle on the T-square blade with its 60-degree angle at the bottom, and place the 45-45-90 triangle on top of its inclined edge so the downward edge forms 60 - 45 = 15 degrees with the horizontal. Alternatively, rest the 45-degree edge on the blade and subtract 30 degrees with the second triangle.

(b) Drawing parallel and perpendicular lines to an arbitrary line AB:

  1. Place one edge (typically the hypotenuse) of the first set square accurately along the given line AB.
  2. Bring the straight edge of the second set square (or the T-square blade) firmly against one of the remaining legs of the first set square to serve as a stationary guide rail.
  3. Parallel line: Hold the guide triangle firmly on the paper and slide the first triangle along the guide edge to the desired point; draw along the hypotenuse edge to get a line parallel to AB.
  4. Perpendicular line: Without moving the stationary guide triangle, rotate the first triangle onto its other perpendicular leg (so the two legs swap on the guide rail, or slide the 90-degree corner into position) and draw along the edge now oriented at 90 degrees to AB.
Answer:

Angles of 15 degrees (60 - 45 or 45 - 30) and 75 degrees (45 + 30) are obtained by stacking both set squares on the horizontal T-square blade. Parallel and perpendicular lines to any arbitrary line AB are drawn using the sliding set-square method, keeping one triangle fixed as a rail while sliding or rotating the working triangle along it.

Example 3

3

A student must ink a mechanical bracket drawing on an A3 sheet using the 0.5 mm ISO line group and Type B technical lettering (h = 7 mm for the title, h = 3.5 mm for dimension text). Specify the exact pen nib sizes for visible outlines, hidden edges, centerlines, cutting planes, and both lettering heights, and list the proper order of penciling/inking.

Determine line thicknesses in the 0.5 mm line group:

  • Thick lines (0.5 mm nib): Visible outlines (Type A), border frame, and the thick ends/bends of cutting plane lines (Type H).
  • Thin lines (0.25 mm nib, half of 0.5 mm): Dimension lines, extension lines, hatching lines (Type B), hidden edges (Type F, 3–4 mm dashes with 1 mm gaps), and centerlines (Type G, long dashes 10–15 mm with 1.5 mm short dashes).

Determine pen widths and spacing for Type B lettering (d = h / 10):

  • Title (h = 7 mm): Stroke thickness d = 7 / 10 = 0.7 mm nib; lowercase body height = 0.7 x 7 = 4.9 mm (approx. 5 mm); character gap = 2d = 1.4 mm; minimum word gap = 6d = 4.2 mm.
  • Dimensions and notes (h = 3.5 mm): Stroke thickness d = 3.5 / 10 = 0.35 mm nib; character gap = 2d = 0.7 mm; minimum word gap = 6d = 2.1 mm.

Follow the standard drawing/inking sequence:

  1. Draw light 2H/4H pencil layout and guidelines; never ink freehand without penciled geometry.
  2. Ink centerlines and circular arcs/circles first (starting from smallest radius to largest), holding the technical pen strictly vertical (90 degrees to paper) and using stepped triangles so ink does not smudge.
  3. Ink visible straight lines (horizontal top-to-bottom, vertical left-to-right, then inclined).
  4. Ink hidden lines, section hatching, and cutting planes.
  5. Ink dimension/extension lines, arrowheads, notes, and title block lettering last, capping each pen immediately after use.
Answer:

Use 0.5 mm for visible outlines/borders/cutting-plane ends, 0.25 mm for hidden lines, centerlines, hatching, and dimension/extension lines, 0.7 mm for 7 mm Type B titles, and 0.35 mm for 3.5 mm Type B notes. Always ink circles/arcs before straight tangent lines, keeping the pen vertical.


Exercises

Exercises

Question 1

Calculate the surface areas (in sq m) of A1 (594 x 841 mm) and A2 (420 x 594 mm) trimmed drawing sheets. Also compute the usable drawing area (in sq mm) inside the border of a landscape A2 sheet with a 20 mm left filing margin and 10 mm margins on the remaining three edges.

Surface area of A1 and A2 sheets:

  • Area of A1 = (594 x 841) / 1000000 = 499554 / 1000000 = 0.4996 sq m (approx. 0.50 sq m, half of A0).
  • Area of A2 = (420 x 594) / 1000000 = 249480 / 1000000 = 0.2495 sq m (approx. 0.25 sq m, one-quarter of A0).

Usable bordered area of landscape A2 (594 mm wide x 420 mm high):

  • Usable width = 594 - (20 + 10) = 594 - 30 = 564 mm.
  • Usable height = 420 - (10 + 10) = 420 - 20 = 400 mm.
  • Usable area inside border = 564 x 400 = 225600 sq mm (0.2256 sq m).
Answer:

A1 area = 0.50 sq m (499554 sq mm); A2 area = 0.25 sq m (249480 sq mm); usable working area inside the A2 border = 225600 sq mm (564 mm x 400 mm).

Question 2

State the purpose and proper handling technique for: (a) an erasing shield, (b) a French curve, (c) a drop-bow compass, and (d) a T-square. Mention one common misuse to avoid for each.

(a) Erasing Shield:

  • Purpose: Protects surrounding lines while erasing a specific unwanted segment or error.
  • Technique & Misuse: Place the closest-matching slot over the target line and press flat with fingers before erasing; avoid sliding the shield while erasing (which smears graphite).

(b) French Curve:

  • Purpose: Draws smooth non-circular curves (ellipses, parabolas, involutes, cam profiles) through plotted points.
  • Technique & Misuse: Lightly sketch the curve freehand first, align at least four plotted points along the curve edge, draw up to one point short of the end of the match, then reposition overlapping two drawn points. Avoid matching only two points at a time, which produces sharp kinks.

(c) Drop-Bow Compass & (d) T-Square:

  • Drop-Bow Compass: Used for small circles (1–10 mm radius). Hold the knurled vertical center pin stationary with one finger while spinning the lead leg around it; avoid pressing too hard on the needle, which tears the sheet center.
  • T-Square: Used for horizontal parallel lines and supporting set squares. Keep the stock pressed firmly against the left ebony board edge and draw left-to-right along the top edge of the blade; never use the T-square against the other three board edges or as a straightedge for cutting paper with a knife.
Answer:

(a) Erasing shield masks adjacent linework during corrections (avoid letting it slip); (b) French curve blends smooth curves across 4+ plotted points with 2-point overlap (avoid 2-point segments); (c) Drop-bow compass draws tiny circles cleanly around a vertical spindle (avoid piercing deep holes); (d) T-square guides horizontal lines from the left working edge (avoid cutting along the blade or using it on other board edges).

Question 3

List the ISO 128 line types (name, visual pattern, and relative thickness) used for each of the following features in a mechanical drawing, and state the precedence order when a visible edge, hidden edge, centerline, and cutting plane coincide:

  1. Visible outline of a part
  2. Hidden internal groove
  3. Axis of symmetry of a cylinder
  4. Section cutting plane
  5. Extreme position of a moving lever

Identify each ISO 128 line type:

  1. Visible outline: Type A — Continuous thick line.
  2. Hidden internal groove: Type F (or E) — Dashed thin (or thick) line (3–4 mm dashes, 1 mm gaps).
  3. Axis of symmetry: Type G — Chain thin line (alternating long and short dashes).
  4. Section cutting plane: Type H — Chain thin line with thick ends and thick segments at directional bends.
  5. Extreme position of a moving lever: Type K — Chain thin double-dashed line.

Precedence order when lines coincide: When two or more lines project onto the same location, draw only the highest-priority line: Visible line (Type A) > Hidden line (Type E/F) > Cutting plane line (Type H) > Centerline (Type G) > Extension/Dimension line (Type B).

Answer:
  1. Type A (continuous thick); 2. Type F/E (dashed); 3. Type G (chain thin); 4. Type H (chain thin, thick ends); 5. Type K (chain thin double-dashed). Precedence: Visible > Hidden > Cutting Plane > Centerline.
Question 4

Differentiate between Type A and Type B single-stroke Gothic lettering per ISO 3098. Calculate the exact stroke thickness (d), lowercase x-height (c), character spacing (a), word spacing (e), and minimum line pitch (b) for Type B vertical lettering of nominal height h = 5 mm.

Difference between Type A and Type B lettering:

  • Type A (Narrow): Stroke thickness is d = h / 14, giving thinner strokes and narrower characters suited to dense notes or microfilming with fine pens.
  • Type B (Standard): Stroke thickness is d = h / 10, giving bolder, standard-width characters preferred for general engineering drawings.

Both types are written either vertically (90 degrees) or inclined at 75 degrees to the right.

Calculate Type B dimensions for h = 5 mm:

  • Stroke thickness: d = h / 10 = 5 / 10 = 0.5 mm
  • Lowercase body height: c = (7 / 10) x h = 0.7 x 5 = 3.5 mm
  • Minimum spacing between characters: a = 2d = 2 x 0.5 = 1.0 mm
  • Minimum spacing between words: e = 6d = 6 x 0.5 = 3.0 mm
  • Minimum baseline-to-baseline pitch: b = 14d = 14 x 0.5 = 7.0 mm
Answer:

Type A uses stroke width d = h/14 while Type B uses d = h/10. For Type B with h = 5 mm: stroke thickness d = 0.5 mm, lowercase height c = 3.5 mm, character spacing a = 1.0 mm, word spacing e = 3.0 mm, and line pitch b = 7.0 mm.

Question 5

Explain why arcs and circles are drawn before straight tangent lines during instrumental drafting, and distinguish between the conical and chisel pencil points in terms of sharpening technique and ideal use.

Why arcs and circles come before straight lines: A compass pivot fixes the circle center precisely, and a circle's tangent points are smooth curves whose endpoints are sensitive to slight over-runs or offsets. It is straightforward to align a straightedge visually tangent to an already-drawn arc and stop the straight line cleanly at the tangency point, whereas trying to adjust a compass center and radius to fit an arc smoothly between two existing straight lines almost always leaves visible steps or double lines.

Conical vs. Chisel pencil points:

  • Conical point: Shaped by rotating the exposed 8–10 mm lead evenly on a sandpaper pad into a symmetric cone. Used for lettering, arrowheads, small details, and general linework (rolled slowly while drawing so it wears uniformly).
  • Chisel (wedge) point: Shaped by sanding two opposite sides of the exposed lead flat into a thin wedge edge. Used for long continuous straight lines (borders, long outlines) because the flat contact edge retains uniform line thickness much longer without frequent re-sharpening.
Answer:

Arcs/circles are drawn first because blending a straight line smoothly onto an existing arc is far more accurate than fitting an arc onto existing straight lines. A conical point (uniform cone) suits lettering, arrowheads, and general lines, while a chisel point (flat two-sided wedge) retains uniform thickness across long straight lines.

Dimensioning →