Oscillation
Open in the Padhaiko app1.1 Physical pendulum
Unlike an idealized simple pendulum (a point mass on a massless inextensible string), any real rigid body free to oscillate under gravity about a fixed horizontal axis not passing through its center of gravity forms a physical pendulum (also called a compound pendulum).
Physical Pendulum and Equivalent Simple Pendulum
A physical pendulum is a rigid body of mass oscillating in a vertical plane about a horizontal pivot axis passing through a point of suspension located at a distance from the center of gravity .
Let be the moment of inertia of the body about the pivot axis through . When displaced by a small angle , the restoring torque due to gravity is:
Applying Newton's second law for rotation ():
This is simple harmonic motion with angular frequency and time period:
By the parallel axis theorem, , where is the moment of inertia about a parallel axis through and is the radius of gyration about . Substituting gives:
where
is the length of the equivalent simple pendulum—the length of a simple pendulum having the exact same time period as the physical pendulum.
1.1.1 Bar pendulum
A bar pendulum is the simplest experimental form of a physical pendulum: a uniform rigid rectangular bar of length and mass with small holes drilled along its center line at regular intervals for pivoting on a horizontal knife-edge.
For a uniform thin bar of length , the moment of inertia about a transverse axis through its center of gravity is , so its radius of gyration is:
Substituting into the physical pendulum period formula gives the time period when suspended at distance from the midpoint :
1.1.2 Interchangeability of point of suspension and point of oscillation
Let be the point of suspension at distance from the center of gravity . On the line extended past , define the point of oscillation (or center of oscillation, ) at distance on the opposite side of such that:
Then the total distance between and equals the equivalent simple pendulum length:
Interchangeability of Suspension and Oscillation Points
If a physical pendulum is inverted and suspended from its point of oscillation (at distance from ), its new time period is identical to the original time period about :
Hence, the point of suspension and the point of oscillation are mutually interchangeable (conjugate points). Moreover, the center of oscillation coincides with the center of percussion: a horizontal impulse delivered at produces no reactive jerk at the pivot .
1.1.3 Minimum time period in case of physical pendulum
The time period is minimum when the equivalent length is minimum.
Differentiating with respect to and setting the derivative to zero:
Checking the second derivative confirms a minimum:
Therefore, the time period of a physical pendulum is minimum when the distance from the center of gravity to the point of suspension equals the radius of gyration (). At this condition:
For a uniform bar pendulum of length , since , the minimum period occurs at and equals:
1.1.4 Torsion pendulum
A torsion pendulum consists of a rigid body (typically a uniform disc or bar) of moment of inertia suspended horizontally by a thin, uniform elastic wire whose upper end is clamped rigidly.
Torsion Pendulum
When the suspended body is twisted by a small angle in the horizontal plane and released, the wire exerts a linear elastic restoring torque proportional to :
where is the torsional constant (restoring torque per unit angular twist, in ) of the wire. For a cylindrical wire of length , radius , and shear modulus (modulus of rigidity) :
The equation of rotational motion is:
This describes angular simple harmonic motion with angular frequency and time period:
Unlike a physical pendulum, the time period of a torsion pendulum does not depend on and remains simple harmonic even for relatively large twist angles (provided the wire stays within its elastic limit). It is widely used in laboratories to measure the modulus of rigidity of a wire and to find the moment of inertia of an irregular body by comparing oscillation periods ( for cradle alone, with known , and with unknown ):
1.1
A uniform thin rod of length oscillates as a bar pendulum about a pivot located at from its center of gravity (). Calculate:
- Its time period about this pivot.
- The distance of the conjugate point of oscillation on the opposite side of the center of gravity.
- The minimum possible time period of the bar pendulum.
Radius of gyration squared and equivalent length: For a uniform bar of length :
The equivalent simple pendulum length is:
Time period and conjugate point:
The conjugate point of oscillation is at:
Minimum time period: The minimum period occurs at , giving :
- Time period:
- Conjugate point of oscillation: on the opposite side of
- Minimum time period:
1.2 Damped and forced oscillation
1.2.1 Damped harmonic oscillator
In real mechanical or electrical systems, dissipative forces such as air drag, viscous friction, or electrical resistance oppose motion and gradually reduce the oscillation amplitude. For low velocities, the damping force is proportional to velocity:
where is the damping constant (in or ).
Equation of Motion of a Damped Harmonic Oscillator
Combining the linear restoring force and the viscous damping force via Newton's second law gives:
Dividing by and defining the natural angular frequency and the damping factor (decay constant) :
Trying a solution yields the characteristic equation , whose roots are:
The physical behavior splits into three regimes depending on the sign of :
- Overdamped (): The roots are real, negative, and distinct (). The system returns slowly and monotonically to equilibrium without oscillating:
- Critically Damped (): Repeated real root . The system returns to equilibrium in the minimum possible time without overshooting (used in analog meters and door closers):
- Underdamped (): The roots are complex conjugates , where the damped angular frequency is:
The displacement oscillates with an exponentially decaying envelope:
The damped time period is , and the logarithmic decrement —the natural logarithm of the ratio of two successive peak amplitudes separated by one period —is:
1.2.2 Difference between free and damped oscillator
| Aspect | Free (Undamped) Oscillator | Damped Oscillator |
|---|---|---|
| Governing Equation | ||
| Forces Acting | Only conservative restoring force () | Restoring force () plus dissipative drag () |
| Amplitude | Constant () forever | Decays exponentially as (underdamped) or drops without oscillation |
| Angular Frequency | Natural frequency | Lower damped frequency |
| Mechanical Energy | Conserved () | Continuously converted to heat () |
| Physical Feasibility | Idealized theoretical limit | All real macroscopic oscillators (pendula, RLC circuits, springs in air) |
1.2.3 Energy in damped oscillation
For a lightly damped (weakly underdamped, ) oscillator, and the amplitude changes negligibly over a single cycle. The total mechanical energy at time is therefore:
where is the initial mechanical energy.
1.2.4 Relaxation time
Relaxation Time
The (energy) relaxation time of a damped oscillator is the time required for its total mechanical energy to decay to () of its initial value:
Thus the energy decay law takes the compact form:
(Note: Some texts also refer to the amplitude relaxation time , the time for the oscillation amplitude to fall to of its initial value.)
1.2.5 Forced oscillation and resonance
When a damped oscillator is driven by a periodic external force , the system performs forced oscillations.
Forced Harmonic Oscillator and Steady-State Solution
The equation of motion is:
where . After initial transients decay (), the steady-state solution oscillates at the driving frequency :
with steady-state amplitude and phase lag given by:
Resonance is the phenomenon in which the amplitude (or power absorption) of a forced oscillator reaches a sharp peak when the driving frequency matches the system's resonant frequency:
- Amplitude Resonance: Minimizing the denominator with respect to gives:
For light damping (), , and the peak amplitude is .
- Velocity / Power Resonance: The velocity amplitude and average power absorbed peak exactly at (where ), with maximum power:
1.2.6 Sharpness of resonance
Sharpness of resonance measures how rapidly the forced oscillation amplitude (or absorbed power) falls off as the driving frequency moves away from the natural frequency .
On the power resonance curve , the half-power frequencies and are the two frequencies on either side of where the absorbed power drops to half of (equivalently, where amplitude falls to ). For light damping (), the full width at half-maximum (bandwidth) is:
- Small damping ( small): is narrow and the peak is tall sharp resonance (desirable for radio tuning circuits).
- Large damping ( large): is wide and the peak is low and flat broad/flat resonance (desirable for automotive suspension dampers).
1.2.7 Quality factor
Quality Factor (Q-Factor)
The quality factor is a dimensionless figure of merit that quantifies how underdamped an oscillator is and how sharp its resonance peak is:
Since energy decays at rate and one period is , the energy lost per cycle is . Substituting this into the definition yields equivalent expressions:
where is the half-power bandwidth and is the logarithmic decrement.
Notice that directly links damping, relaxation time, and resonance sharpness: a high- oscillator loses only a tiny fraction of its energy per cycle, has a long relaxation time , and exhibits an extremely sharp resonance peak ().
1.2
A mass is attached to a spring of stiffness in a medium with damping constant . Find:
- The natural angular frequency , damping factor , and damped angular frequency .
- The energy relaxation time .
- The quality factor and the half-power bandwidth .
Natural frequency, damping factor, and damped frequency:
Since , the motion is underdamped with:
Energy relaxation time:
Quality factor and bandwidth:
- , , ()
- Energy relaxation time:
- Quality factor: ; half-power bandwidth:
1.3
The amplitude of a lightly damped oscillator of period drops to of its initial value after complete oscillations. Calculate:
- The logarithmic decrement .
- The damping factor .
- The quality factor of the oscillator.
Logarithmic decrement from cycles: Because the ratio of amplitudes over consecutive cycles is :
Damping factor and quality factor: Since :
Using (valid for light damping):
- Logarithmic decrement:
- Damping factor:
- Quality factor:
Exercises
Practice Exercises — Physical, Damped, and Forced Oscillations
Derive the expression for the time period of a physical pendulum and prove that the point of suspension and the point of oscillation are interchangeable. Also show the condition under which the time period is minimum.
Equation of motion and time period: For a rigid body of mass pivoted at at distance from its center of gravity , a small angular displacement produces restoring torque . Thus , giving:
where is the radius of gyration about .
Interchangeability of and : Let the point of oscillation lie on the opposite side of at distance . If the body is suspended from instead of , replacing by yields:
Hence and are mutually interchangeable and separated by .
Condition for minimum time period: Minimizing :
Thus occurs when .
. Choosing yields , proving interchangeability. Setting gives the minimum period at .
A uniform bar pendulum of length is suspended from a point away from its center of gravity (). Calculate its time period and find the minimum possible time period of this bar.
Time period at : For a uniform bar of length , .
Minimum time period: With :
Time period at : ; minimum time period: .
A uniform solid circular disc of mass and radius is suspended horizontally from its center by a steel wire of length , radius , and shear modulus . Find the torsional constant and the time period of torsional oscillations.
Torsional constant :
Moment of inertia and time period : For a solid disc about its symmetry axis:
Torsional constant ; time period .
Distinguish between underdamped, critically damped, and overdamped oscillations with reference to the damping factor and natural angular frequency . Define relaxation time and quality factor, and show how relates to the sharpness of resonance.
Three damping regimes (, ):
- Underdamped (): Oscillates with exponentially decaying amplitude and angular frequency .
- Critically damped (): Non-oscillatory return to equilibrium in the shortest possible time without overshoot.
- Overdamped (): Slow, non-oscillatory return to equilibrium governed by two decaying exponentials.
Relaxation time, quality factor, and resonance sharpness:
- Energy relaxation time: , the time for mechanical energy to fall to of its initial value.
- Quality factor: .
Because the half-power bandwidth is , a larger (smaller damping) gives a narrower bandwidth and a sharper resonance peak.
Underdamped () oscillates with decaying amplitude; critically damped () returns fastest without oscillation; overdamped () decays sluggishly. Relaxation time is , and quality factor increases as bandwidth narrows, directly measuring resonance sharpness.
In a forced resonance experiment, a lightly damped oscillator with natural angular frequency has its mechanical energy drop to of its initial value in when the driving force is removed. Determine:
- The energy relaxation time and damping factor .
- The quality factor and the half-power bandwidth .
Relaxation time and damping factor: Using with :
The damping factor is:
Quality factor and half-power bandwidth:
- ,
- ,