Heat and Thermodynamics
Open in the Padhaiko app3.1 Quantity of heat
Heat is energy in transit driven by a temperature difference. Quantifying how much thermal energy is released by chemical combustion or absorbed per unit temperature rise is essential in fuel engineering, nutrition, and solid-state physics.
3.1.1 Calorific value of foods and fuels
Calorific Value (GCV and NCV)
The calorific value (or heating value) of a solid, liquid, or gaseous fuel (or food) is the total quantity of heat liberated when unit mass (or unit volume for gases) of the substance undergoes complete combustion in excess oxygen.
- SI Unit: or (for gases, ; in nutrition, or , where ).
- Gross (Higher) Calorific Value (GCV / HHV): Total heat evolved when unit mass of fuel is burnt completely and the combustion products (including water vapor) are cooled back to room temperature, recovering the latent heat of condensation of steam.
- Net (Lower) Calorific Value (NCV / LHV): Heat actually available when combustion steam escapes uncondensed:
where is the mass of water formed per of fuel containing hydrogen mass fraction , and at .
| Substance | Approximate Calorific Value | Engineering / Biological Note |
|---|---|---|
| Hydrogen gas () | (GCV) | Highest gravimetric energy density among chemical fuels |
| Natural gas / Methane | Clean-burning fuel with high H-to-C ratio | |
| Gasoline / Diesel | Liquid hydrocarbon transport fuels | |
| Anthracite / Bituminous coal | Solid fossil fuel | |
| Dry wood | Biomass fuel (depends strongly on moisture) | |
| Fats (lipids) | () | Primary dense energy store in foods |
| Carbohydrates & Proteins | () | Primary dietary fuels |
3.1.2 Bomb calorimeter
A bomb calorimeter measures the gross calorific value of solid and non-volatile liquid fuels (or food pellets) at constant volume.
- Construction: A thick-walled stainless-steel reaction vessel ("bomb") resists high combustion pressures. A weighed fuel sample () sits inside a platinum crucible ignited electrically via a fine fuse wire, surrounded by high-pressure oxygen (). The bomb is immersed in a known mass of water () inside an insulated outer jacket equipped with a stirrer and precision Beckmann thermometer.
- Working & Heat Balance: Firing the fuse burns the fuel completely at constant volume. Heat released by the fuel equals the heat absorbed by the water and the calorimeter assembly (characterized by its water equivalent ):
where is the specific heat capacity of water and is the corrected temperature rise (including cooling correction and fuse-wire correction). Thus:
3.1.3 Specific heat of solid: Dulong-Petit law, Einstein’s law
For solids, the molar heat capacity at constant volume approaches a universal classical constant at high temperatures, but drops sharply toward zero as .
Dulong–Petit Law vs. Einstein's Quantum Theory of Specific Heat
- Dulong–Petit Law (Classical, 1819): Treating each atom in a crystal lattice as an independent classical 3D harmonic oscillator with translational and potential quadratic degrees of freedom gives mean energy per atom, or per mole. Hence the molar heat capacity is constant for all solids:
Failure: Experimentally, of light solids like diamond, boron, and silicon is much smaller than at room temperature, and all solids obey as .
- Einstein's Law (Quantum, 1907): Einstein modeled the atoms in a mole of solid as independent 1D quantum harmonic oscillators all vibrating at a single characteristic frequency , with quantized energies . Defining the Einstein temperature , the molar internal energy and molar heat capacity are:
- High- limit (): Expanding recovers the Dulong–Petit value .
- Low- limit (): as .
(Note: At very low temperatures, Einstein's exponential drop is slightly steeper than the experimental behavior, which Debye later explained using a spectrum of coupled lattice frequencies.)
3.1
In a bomb calorimeter test, of coal is completely burned in excess oxygen. The calorimeter contains of water, the water equivalent of the bomb and vessel is , and the corrected temperature rise is . Taking , find the gross calorific value (GCV) of the coal in .
Total heat absorbed by water and calorimeter:
Gross calorific value per kilogram of fuel: With :
The gross calorific value of the coal sample is .
3.2 Nature of heat
Kinetic theory connects macroscopic thermal properties (pressure, temperature, specific heat ratios, and real-gas liquefaction) to microscopic molecular motion and intermolecular forces.
3.2.1 Degree of freedom
Degrees of Freedom
The number of degrees of freedom () of a dynamical system is the minimum number of independent coordinates (translational, rotational, or vibrational) required to specify completely the position and configuration of a molecule in space.
- A free point mass moving in 3D space has translational degrees of freedom ().
- A rigid dumbbell (diatomic) molecule adds rotational axes perpendicular to the bond axis (rotation about the bond axis itself has negligible moment of inertia), giving at room temperature.
- A non-linear rigid polyatomic molecule (e.g., ) rotates about all principal axes, giving (excluding vibration).
3.2.2 Maxwell’s law of equipartition of energy
Maxwell's Law of Equipartition of Energy
For any classical thermodynamic system in thermal equilibrium at absolute temperature , the total average kinetic/potential energy is shared equally among all active quadratic degrees of freedom, with each quadratic term in the energy contributing an average energy of:
where is Boltzmann's constant and .
Thus, for of an ideal gas with active degrees of freedom, internal energy is , so:
3.2.3 Atomicity of gases
Atomicity is the number of atoms in one molecule of a gas. Equipartition links atomicity directly to the adiabatic index :
| Gas Type (Atomicity) | Examples | Active d.o.f. () | |||
|---|---|---|---|---|---|
| Monoatomic () | (trans.) | ||||
| Diatomic (, rigid) | ( trans. rot.) | ||||
| Non-linear Polyatomic (, rigid) | ( trans. rot.) |
(At high temperatures, vibrational modes activate; each vibrational mode contributes quadratic terms—kinetic + potential—adding per molecule or to .)
3.2.4 Vander-Waal’s equation of real gases
The ideal gas equation assumes point-sized molecules () and zero intermolecular attraction. Real gases deviate significantly at high pressures and low temperatures.
Van der Waals Equation of State
Van der Waals introduced two corrections for moles of a real gas in volume at pressure :
- Volume Correction (): Because molecules occupy finite volume, the free volume available for motion is reduced to , where (the co-volume) equals times the actual volume of mole of spherical molecules.
- Pressure Correction (): Attractive intermolecular forces pull surface molecules inward, reducing measured pressure below the ideal kinetic pressure by .
Combining both corrections gives Van der Waals' equation:
For mole (), with molar volume :
3.2.5 Critical constants
At the critical point, the liquid and vapor phases become indistinguishable, and the isotherm exhibits a horizontal point of inflection where both the first and second derivatives vanish:
Solving the three coefficient relations yields the critical constants in terms of :
The critical compressibility factor predicted by Van der Waals' equation is universal for all gases:
3.2
For carbon dioxide (), the Van der Waals constants are and . Using , calculate its critical volume , critical temperature , and critical pressure .
Critical molar volume :
Critical temperature :
Critical pressure :
, , .
3.3 Thermodynamics
3.3.1 Laws of thermodynamics
Four Fundamental Laws of Thermodynamics
- Zeroth Law (Thermal Equilibrium & Temperature): If two systems and are each in thermal equilibrium with a third system , then and are in thermal equilibrium with each other. This defines temperature as the state variable governing thermal equilibrium.
- First Law (Conservation of Energy): The heat supplied to a system equals the change in internal energy plus the mechanical work done by the system:
(Internal energy is a state function; and are path-dependent.)
- Second Law (Direction & Quality of Energy):
- Kelvin–Planck statement: No cyclic heat engine can convert heat from a single thermal reservoir completely into work without rejecting some heat to a colder sink ().
- Clausius statement: Heat cannot spontaneously flow from a colder body to a hotter body without external work input.
- Clausius inequality: For any reversible process, ; for irreversible processes, .
- Third Law (Nernst Heat Theorem): As absolute temperature approaches zero (), the entropy change of any isothermal process approaches zero, and the entropy of a perfect pure crystal approaches zero (). Consequently, absolute zero cannot be reached in a finite number of steps.
3.3.2 Clapeyron latent heat equation
The Clausius–Clapeyron equation describes the slope of a phase coexistence curve (solid–liquid, liquid–vapor, or solid–vapor) on a diagram.
Clapeyron Latent Heat Equation
During an isothermal, isobaric phase change at temperature and pressure involving latent heat per unit mass (or per mole) as specific volume changes from to :
- Boiling (liquid vapor): always, so : boiling point increases with pressure.
- Melting of ice (solid liquid): Water contracts on melting (), so : melting point of ice decreases under pressure.
3.3.3 Entropy and Third law of thermodynamics
Entropy () is a thermodynamic state function measuring microscopic disorder (number of accessible microstates , via Boltzmann's relation ). For any infinitesimal reversible path:
For an isolated system, the principle of entropy increase states ( for reversible processes, for irreversible spontaneous processes).
By the Third Law of Thermodynamics:
Because heat capacity as , every adiabatic/isothermal cooling step extracts vanishingly less entropy as drops, making absolute zero unattainable in finite steps.
3.3.4 Negative energy
In classical statistical mechanics, kinetic energy is unbounded above, so adding energy always increases the number of accessible states () and temperature always holds. However, in special quantum systems with an upper bound on energy (such as nuclear spins in a magnetic field or atomic energy levels in a laser gain medium with population inversion), raising total energy beyond the halfway mark actually reduces the number of configurations (fewer ways to place almost all spins in the upper state), so entropy decreases with increasing :
3.3.5 Maxwell’s thermodynamic relations
Using the combined First and Second Law alongside the four thermodynamic potentials—Internal Energy (), Enthalpy (), Helmholtz Free Energy (), and Gibbs Free Energy ()—exactness of differentials () produces Maxwell's four thermodynamic relations:
Maxwell's Four Thermodynamic Relations
- From :
- From :
- From :
- From :
3.3.6 Gibb’s free energy and phase transitions
Gibbs free energy is defined as:
At constant temperature and pressure (), a spontaneous process always proceeds in the direction of decreasing (), and two phases (e.g., liquid and vapor) coexist in phase equilibrium only when their specific Gibbs free energies are equal:
Ehrenfest Classification of Phase Transitions:
- First-Order Phase Transition (melting, boiling, sublimation): is continuous across the transition, but its first partial derivatives and suffer discontinuous jumps (, ), absorbing or releasing latent heat .
- Second-Order Phase Transition (ferromagnetic Curie point, normal-to-superconductor transition at , liquid He I–II -transition): and its first derivatives () are continuous (zero latent heat), while second derivatives (, compressibility , thermal expansion ) show discontinuities or sharp -peaks.
3.4 Heat and mass transfer
3.4.1 Fourier’s law of thermal conductivity
Fourier's Law of Heat Conduction
In steady-state 1D heat conduction through a homogeneous slab of cross-sectional area perpendicular to heat flow, the rate of heat flow is proportional to the area and the negative temperature gradient :
where is the coefficient of thermal conductivity () of the material, and the minus sign shows that heat flows from higher to lower temperature. For a plane wall of thickness with face temperatures :
3.4.2 Use of thermal conductivity in building sciences
Managing conductive heat gain and loss is central to energy-efficient building design:
- Wall & Roof Insulation: Materials with ultra-low thermal conductivity—such as fiberglass/mineral wool (), expanded polystyrene (EPS), polyurethane foam, and trapped air cavities—line exterior walls and roofs to keep interiors warm in winter and cool in summer.
- Double-Glazed Windows: Sealing dry air or argon () between two glass panes cuts conductive and convective window losses dramatically compared to single-pane glass ().
- Thermal Bridges: High- structural steel beams or concrete lintels spanning an insulated wall create local heat-leak paths ("thermal bridges") that cause interior condensation and mold unless thermally broken.
3.4.3 Thermal resistance
By analogy with Ohm's law (), writing Fourier's law as defines thermal resistance:
- Layers in Series (e.g., brick + insulation + plaster): Total thermal resistance adds directly, , and the steady heat flux is the same through every layer.
- Layers in Parallel (e.g., wood studs alongside insulated cavities): Conductances add,
3.4.4 Types of convection
Convection is heat transfer by bulk macroscopic motion of a fluid (liquid or gas):
- Natural (Free) Convection: Fluid motion arises purely from buoyancy forces created by temperature-induced density differences (hot fluid rises, cool fluid sinks)—for example, warm air rising off a radiator or sea breezes.
- Forced Convection: Fluid is driven across a surface by an external mechanical device such as a fan, blower, or pump—for example, CPU cooling fans, automobile radiators, and HVAC air handlers. Forced convection achieves much higher heat-transfer coefficients in Newton's law of convective cooling .
3.4.5 Law of diffusion
Mass diffusion is the net transport of molecules or atoms from regions of higher concentration to regions of lower concentration due to random thermal motion.
Fick's Laws of Diffusion
- Fick's First Law (Steady-State Diffusion): The diffusive molar (or mass) flux (amount crossing unit area per unit time, ) is proportional to the negative concentration gradient :
where is the diffusion coefficient (diffusivity) ().
- Fick's Second Law (Non-Steady / Time-Dependent Accumulation): Combining Fick's first law with mass conservation () gives the diffusion equation:
(Notice the exact mathematical parallel with heat conduction: thermal flux mirrors .)
3.4.6 Relation between Stefan’s law and Newton’s law of Cooling
According to Stefan–Boltzmann's law, a body of surface area , emissivity , and absolute temperature in surroundings at temperature radiates net thermal power:
where is the Stefan–Boltzmann constant.
Thus, Newton's law of cooling () is the first-order linear approximation to Stefan's radiation law valid when (complemented in air by linear natural convection).
3.4.7 Pyrheliometer and Pyrometer
| Aspect | Pyrheliometer | Pyrometer |
|---|---|---|
| Quantity Measured | Direct beam solar irradiance () and the solar constant | High surface temperatures ( to ) without physical contact |
| Operating Principle | Absorbs collimated sunlight on a blackened strip/disc (e.g., Ångström compensation pyrheliometer balances solar heating against measured electrical heating in an identical shaded strip) | Measures thermal radiation emitted by a hot furnace or molten metal (Optical disappearing-filament pyrometer matches brightness at via Wien/Planck's law; Total radiation pyrometer focuses all wavelengths onto a thermopile using Stefan's law) |
| Key Applications | Meteorology, solar PV/thermal resource assessment, atmospheric physics | Metallurgy, kilns, glass/steel furnaces, turbine blades |
3.3
A composite building wall of area consists of a thick brick layer () backed by a glass-wool insulation layer (). If the inner surface is at and the outer surface is at , calculate:
- The thermal resistance of each layer and the total thermal resistance.
- The steady-state rate of heat loss through the wall.
Individual thermal resistances ():
Total series resistance and steady heat loss:
- , ,
- Steady heat loss rate:
Exercises
Practice Exercises — Heat, Thermodynamics, and Heat/Mass Transfer
Explain Gross Calorific Value (GCV) and Net Calorific Value (NCV), and describe how a bomb calorimeter determines the GCV of a solid fuel.
GCV vs. NCV:
- GCV: Total heat released by complete combustion of unit mass of fuel when combustion steam is condensed back to liquid water at room temperature.
- NCV: Heat available when steam escapes uncondensed ().
Bomb calorimeter principle: A known fuel mass is ignited electrically in excess inside a sealed steel bomb submerged in water of mass and calorimeter water equivalent . Measuring the corrected temperature rise gives:
GCV includes the latent heat of condensed water vapor whereas NCV excludes it. A bomb calorimeter burns a weighed sample at constant volume in pressurized oxygen and computes from the water temperature rise.
Compare the Dulong–Petit law and Einstein's law for the molar specific heat capacity of solids. Evaluate predicted by Einstein's formula at (using ) and compare it with the Dulong–Petit value.
Dulong–Petit vs. Einstein: Dulong–Petit treats lattice atoms as classical 3D harmonic oscillators, predicting at all temperatures. Einstein quantizes oscillator energy levels (), yielding:
which approaches at high and drops toward as .
Evaluation at ():
Dulong–Petit predicts a constant , whereas Einstein's quantum formula gives at (about of ).
State the Clapeyron latent heat equation and use it to estimate the change in the melting point of ice when the pressure increases by (). Given: normal melting point , latent heat of fusion , specific volume of liquid water , and specific volume of ice .
Clapeyron equation:
Numerical substitution ():
The melting point of ice decreases by (to ).
State Maxwell's four thermodynamic relations and explain the physical meaning of negative absolute temperature, Gibbs free energy, and first- vs. second-order phase transitions.
Maxwell's four relations:
Negative absolute temperature, Gibbs free energy, and phase transitions:
- Negative temperature (): Occurs in energy-bounded systems with population inversion where entropy drops as internal energy increases (); such states are hotter than .
- Gibbs free energy (): Determines spontaneity ( at constant ) and phase equilibrium ().
- Phase transitions: First-order transitions have discontinuous first derivatives () and non-zero latent heat; second-order transitions have continuous (zero latent heat) but discontinuous second derivatives ().
Maxwell's relations link partial derivatives of ; negative temperature arises when in bounded-energy systems; Gibbs free energy governs phase equilibrium () and distinguishes first-order (latent heat present) from second-order (continuous ) transitions.
Show how Newton's law of cooling follows from Stefan's radiation law for small temperature differences. A body of surface area and emissivity is at in surroundings at (). Compare the exact Stefan–Boltzmann radiative power loss with the linearized Newton approximation.
Derivation ( with ):
Since , , which is Newton's law of cooling.
Comparison at , :
- Exact Stefan–Boltzmann:
- Linearized Newton approximation:
Expanding reduces Stefan's law to Newton's linear cooling law. Exact radiative loss is compared with from the linearized approximation (within ).