PadhaikoAll subjects

Field-Effect Transistor (part 1: 2.1–2.4)

Electronic Device and Circuits (ENEX 151)

Open in the Padhaiko app

2.1 Structure and physical operation of the junction field-effect transistor

Definition

Junction FET (n-channel)

An n-channel JFET has a bar of n-type semiconductor (the channel) between two terminals, source (S) and drain (D), with p-type gate (G) regions diffused on the sides. Current is carried by majority carriers only, so it is a unipolar device with very high input resistance (the gate junction is reverse biased).

In saturation (the amplifier region), Shockley's equation holds:

is the drain current at . Transconductance .

2.2 Structure and physical operation of enhancement-type MOSFET

Definition

Enhancement-Type n-Channel MOSFET

A p-type substrate (body) has two heavily doped regions, the source and the drain. A thin silicon dioxide layer over the region between them carries a metal (or polysilicon) gate. The oxide gives an extremely high input resistance () and no gate current at DC.

Operating Regions of the n-Channel Enhancement MOSFET
RegionConditionUse
Cutoffswitch OFF
Triode (ohmic) and voltage-controlled resistor, switch ON
Saturation and amplifier

2.3 Current-voltage characteristic of enhancement-type MOSFET

Definition

I-V Equations of the NMOS

Let where is the process transconductance parameter (A/V), the channel width and its length.

where models channel-length modulation (set for the ideal case).

2.4 The depletion-type MOSFET

Definition

Depletion-Type MOSFET

A depletion-type MOSFET has a built-in n channel between source and drain, so current flows at . A negative depletes the channel (reduces ) and a positive enhances it, so it works in both modes. The threshold voltage is negative ( for NMOS, also called the pinch-off voltage ). In saturation:

AspectJFETDepletion MOSFET
Gate structurereverse-biased junctionmetal gate insulated by oxide
Input resistance to or more
range to only (no forward bias)both polarities
Handlingruggedoxide damaged by static discharge
Example 2.1

2.1

An NMOS transistor has , and . Find for with (a) and (b) , and the small- resistance.

Parameters. and .

(a) : triode.

(b) : saturation.

Resistance for small . .

Answer:

(a) (triode); (b) (saturation); .

Example 2.2

2.2

An n-channel JFET has and . Find and at , and the that gives .

Drain current. .

Transconductance. .

Required . gives (taking the root that keeps ), so .

Answer:

, , .

Example 2.3

2.3

A depletion-mode NMOS has and . Find at , and (saturation).

At . .

At . (depletion mode).

At . (enhancement mode): the depletion MOSFET still obeys the same equation for positive .

Answer:

, , .

Exercises

Practice Exercises: JFET and MOSFET Characteristics

Question 1

Explain the physical operation of an n-channel JFET, defining pinch-off voltage. Why is the input resistance of a MOSFET higher than that of a JFET?

Operation. The channel conducts between source and drain. The reverse-biased gate junction depletion region narrows the channel as becomes more negative, which reduces . At the channel closes completely.

Pinch-off and saturation. For the channel is pinched off near the drain, and levels off at .

Input resistance. A JFET gate is a reverse-biased junction with small leakage. A MOSFET gate is insulated by oxide with no current path at all.

Answer:

Pinch-off voltage is the at which the channel closes. MOSFET gate is insulated by oxide.

Question 2

An NMOS transistor has and . Identify the region and find for (a) , and (b) , .

Overdrive. .

(a) , triode: .

(b) , saturation: .

Answer:

(a) triode; (b) saturation.

Question 3

An NMOS operated in saturation gives at and at . Find and .

Ratio of square roots. , so .

Solve. gives . Then .

Answer:

, .

Question 4

A JFET has and . Find , and at .

Current. .

Transconductance. and .

Answer:

, , .

Question 5

An NMOS has , and . Find at and the output resistance (use the ideal current in ).

Drain current. .

Output resistance. .

Answer:

; .

← The Bipolar Junction Transistor (BJT) (part 2: 1.7–1.11)Field-Effect Transistor (part 2: 2.5–2.8) →