Plane Waves (part 1: 5.1–5.3)
Open in the Padhaiko app5.1 Wave propagation in lossless and lossy dielectric
Electromagnetic radiation travels through space and material media in the form of coupled, propagating electric and magnetic waves. In this chapter, we investigate the fundamental behavior of uniform plane waves—waves in which both and share constant amplitude and phase over infinite planar surfaces perpendicular to the direction of propagation.
The Electromagnetic Wave Equation
Starting from Maxwell's curl equations for a linear, homogeneous, and isotropic medium with conductivity , permittivity , and permeability :
Taking the curl of both sides of Faraday's law:
Using the vector identity in a charge-free region ():
For time-harmonic (sinusoidal) fields with time dependence :
Complex Propagation Constant ()
The complex propagation constant is defined as:
where:
- is the attenuation constant (measured in Nepers per meter, , or where ). It characterizes the rate of exponential decay of wave amplitude as it traverses a lossy medium.
- is the phase constant (measured in radians per meter, ). It describes the phase shift per unit distance, defining wavelength and velocity:
- The general exact expressions for and in any medium are:
Loss Tangent
Loss Tangent and Dissipation Factor
From Ampere's law, . The ratio of conduction current density magnitude to displacement current density magnitude defines the loss tangent ():
- Good (Low-Loss) Dielectric: (typically ).
- Good Conductor: (typically ).
5.2 Plane waves in free space, lossless dielectric, good conductor
The general solution for a uniform plane wave propagating in the direction with polarized along the -axis is:
where is the intrinsic impedance of the medium.
| Parameter | Free Space () | Lossless Dielectric () | Good Conductor () |
|---|---|---|---|
| Attenuation Constant () | |||
| Phase Constant () | |||
| Phase Velocity () | |||
| Intrinsic Impedance () | |||
| to Phase Shift () | (in phase) | (in phase) | ( lags by ) |
Skin Effect and Skin Depth ()
In a good conductor, high electrical conductivity causes high attenuation, attenuating electromagnetic fields within a microscopic surface layer:
Skin Depth (Depth of Penetration) and Surface Resistance
- Skin Depth (): The spatial depth inside a conducting medium at which the field amplitude decays to () of its surface value:
- Surface Resistance (): The high-frequency AC resistance of a conductor per unit square area:
Because , high-frequency AC current flows entirely within a thin outer "skin" of the conductor, dramatically increasing the AC ohmic resistance compared to DC.
5.3 Power and poynting theorem average power density
The Poynting Vector and Conservation of Electromagnetic Power
Electromagnetic waves carry energy through space. The spatial distribution and flow rate of this energy are governed by the Poynting theorem, established by John Henry Poynting in 1884.
Poynting Vector
The instantaneous Poynting vector represents the instantaneous rate of energy transfer (power flow) per unit cross-sectional area:
The direction of is perpendicular to both and , pointing in the direction of wave power propagation.
Poynting's Theorem
Starting from Maxwell's curl equations and taking the divergence :
Physical Interpretation:
- Left-hand side: The net total electromagnetic power entering closed volume through boundary surface .
- First integral on RHS: The rate of increase of stored electrostatic and magnetostatic energy within .
- Second integral on RHS: The ohmic power dissipated as Joule heat within .
Time-Average Poynting Vector (Average Power Density)
Because electromagnetic waves operate at frequencies from kilohertz to terahertz, physical power sensors measure the time-average power density:
Time-Average Poynting Vector ()
For time-harmonic fields in phasor notation:
where is the complex conjugate of the magnetic phasor field.
- For a uniform plane wave propagating in a general lossy medium in the direction:
- For a lossless medium ():
The total time-average power transmitted through an open surface is:
Worked Examples
5.1
A uniform plane wave with frequency and electric field amplitude propagates in the direction. Determine the attenuation constant , phase constant , wavelength , phase velocity , and intrinsic impedance , and write expressions for and in:
- Free space ().
- A lossless dielectric with .
- A good conductor with .
Evaluating parameters in free space: Angular frequency .
Evaluating parameters in lossless dielectric ():
Evaluating parameters in good conductor (): Because , it is an exceptional conductor:
- Free space: , , , , .
- Lossless dielectric: , , , , .
- Conductor: , , , .
5.2
For annealed copper with conductivity and :
- Calculate the skin depth at frequencies: (a) (power frequency), (b) (radio frequency), and (c) (microwave radar).
- At a frequency of , determine the penetration depth into copper required to attenuate the electric field amplitude to of its surface value.
Evaluating skin depth formula for copper:
- At :
- At :
- At :
Determining penetration depth for amplitude at : At :
The field attenuates as . For :
- Skin depths: (a) : ; (b) : ; (c) : ().
- Penetration depth for field at : .
5.3
A uniform plane wave in a lossy non-magnetic medium has an electric field:
with attenuation constant , phase constant , and intrinsic impedance .
- Calculate the time-average Poynting vector at and .
- Compute the total average power passing through a rectangular cross-section of dimensions located in the plane .
Formulating the time-average power density: For a wave propagating in the direction in a lossy medium:
Substituting , , , and :
Evaluating power densities at and :
- At :
- At :
Computing total power passing through aperture at : Aperture area:
At :
Total average power transmitted through the aperture:
- At : ; at : .
- Total power through aperture at : .
Exercises
Exercise — Wave Propagation in Media and Poynting Vector
A non-magnetic dielectric medium () operates at frequency with relative permittivity and loss tangent .
- Determine whether the medium qualifies as a low-loss dielectric.
- Calculate the attenuation constant , phase constant , wavelength , phase velocity , and intrinsic impedance .
Evaluating classification and propagation parameters: Since , the medium is a low-loss (good) dielectric. Angular frequency: . Phase velocity:
Phase constant:
Wavelength:
Calculating attenuation constant and intrinsic impedance : For a low-loss dielectric:
Intrinsic impedance:
- With , the medium is a low-loss dielectric.
- , , , , and .
An aluminum enclosure (, ) is used to shield sensitive RF electronics from an external interfering plane wave at frequency .
- Calculate the skin depth of aluminum at .
- Determine the minimum wall thickness required to provide at least of wave attenuation across the shield.
Evaluating the skin depth :
Calculating thickness for attenuation: The attenuation in decibels through a conductor of thickness is:
For :
- Skin depth: .
- Minimum shield thickness: (approx. ).
A cylindrical metal conductor of radius , length , and conductivity carries a uniform steady DC current along the direction.
- Determine the electric field and magnetic field at the cylindrical outer surface .
- Compute the Poynting vector at the surface and verify that the total inward electromagnetic power matches the internal ohmic dissipation .
Evaluating field vectors at the conductor surface : Current density inside the cylinder: . By Ohm's law:
By Ampere's circuital law at :
Evaluating the Poynting vector:
Notice that points radially inward (), indicating that electromagnetic energy flows from the surrounding space into the conductor.
Integrating the Poynting vector over the surface: The outward normal surface element is :
Since resistance , the total power entering the wire is:
This proves that electrical energy enters the resistor from the surrounding electromagnetic fields through its cylindrical side surface and is dissipated as Joule heat.
- At : and .
- Poynting vector (directed radially inward); total inward power equals , verifying Poynting's theorem.
The solar constant (total solar radiation power arriving at the top of the Earth's atmosphere) is approximately . Assuming solar radiation can be approximated as a uniform plane wave in free space:
- Calculate the peak electric field intensity and peak magnetic field intensity .
- Compute the RMS values and .
Relating average power flux to peak electric and magnetic fields: In free space ():
Solving for :
Evaluating peak magnetic field intensity :
Evaluating RMS values:
- Peak values: () and .
- RMS values: and .
Derive the time-harmonic vector wave equation from Maxwell's curl equations for a general lossy medium. Define the attenuation constant , phase constant , and explain the physical significance of skin depth .
Derivation from Maxwell's Curl Equations: In a linear, isotropic, homogeneous medium with parameters and zero free charge ():
Taking the curl of equation (1):
Substituting equation (2):
Using the vector identity , and noting that in a source-free region:
where .
Definitions and Physical Significance:
- Attenuation Constant (, ): Dictates the exponential decrease in wave amplitude per unit propagation distance (). It arises from ohmic conduction losses ().
- Phase Constant (, ): Measures the spatial phase advance per meter, governing wavelength and phase velocity .
- Skin Depth (): In conducting media, skin depth measures the distance over which the wave amplitude drops to of its initial surface value. At high frequencies, fields and currents are confined to this ultra-thin surface layer, causing the effective AC resistance to rise with .
The wave equation is derived with . governs amplitude attenuation (), governs phase shift, and skin depth defines the boundary layer depth to which electromagnetic fields penetrate into conductors.