PadhaikoAll subjects

Metal Complexes, Rare Earth Elements and Metal alloys

Engineering Chemistry (ENSH 153)

Open in the Padhaiko app

4.1 Complexes

A coordination compound contains a central metal atom or ion bonded to a definite number of ions or molecules called ligands through coordinate (dative) bonds. In the coordination sphere is written in square brackets, are the counter ions, are the ligands, and the coordination number (number of donor atoms attached to the metal) is .

4.1.1 Introduction and Werner's theory

Definition

Postulates of Werner's Theory

  1. A metal exhibits two kinds of valence: the primary (ionizable) valence, equal to its oxidation state and satisfied by negative ions, shown by dotted lines; and the secondary (non-ionizable) valence, equal to the coordination number, satisfied by ligands (neutral or negative) and directed in space.
  2. Every metal tends to satisfy both its primary and secondary valences. A negative ion may satisfy both.
  3. The secondary valences are directed towards fixed positions in space, which gives the complex a definite geometry: gives octahedral, gives tetrahedral or square planar.

Evidence. The compounds of cobalt(III) chloride with ammonia show different numbers of ionizable chloride ions when treated with excess :

Werner's Cobalt(III) Ammine Series
CompoundCl precipitated as AgCl (per formula)Formula in Werner's theoryNumber of ions

The chloride in the coordination sphere (secondary valence) is not precipitated; molar conductivity decreases with the number of ions, confirming the formulae. Werner also explained isomerism (the two forms of , cis and trans, are consistent only with an octahedron).

Example 4.1

4.1

(a) of is treated with excess . What mass of AgCl () is precipitated? (b) Find the oxidation state and EAN of Co in and of Fe in .

(a) Precipitate: The formula is , so only chloride ions are ionizable: , mass .

(b) Oxidation state and EAN: : , so Co(III), . : , so Fe(II), . Both reach the krypton configuration.

Answer:

(a) ; (b) Co(III) with EAN ; Fe(II) with EAN .

4.1.2 Geometry of complexes by valence bond theory and its applications

Definition

Valence Bond Theory of Complexes

The ligand donates a lone pair into an empty hybrid orbital of the metal. The type of hybridization fixes the geometry:

The magnetic moment (spin only) is , with unpaired electrons: : ; : ; : ; : ; : . Zero unpaired electrons gives a diamagnetic complex.

Geometry and Magnetism of Typical Complexes by VBT
ComplexMetal ion (config.)HybridizationGeometryUnpaired electronsMagnetic moment (BM)
()Square planar (diamagnetic)
()Tetrahedral
()Octahedral (low spin)
()Octahedral (high spin)
()Octahedral (low spin)
()Square planar

Applications of VBT: predicting shape and magnetic behaviour. Limitations: it does not explain the colours or spectra of complexes, and cannot quantitatively predict the high- or low-spin choice.

4.1.3 Crystal field theory: principle and applications

Theorem

Crystal Field Splitting in an Octahedral Complex

Crystal field theory treats the ligands as negative point charges around a metal ion with degenerate orbitals. In an octahedral field the and orbitals (), which point towards the ligands, are repelled more and rise in energy, and , , (), which point between ligands, fall:

where is the crystal field splitting energy. For a tetrahedral field the splitting is inverted and smaller, .

Spectrochemical series (increasing ): .

Applications: colours of gems and pigments, magnetic properties, stability and reactivity of complexes, analysis (EDTA titration for hardness of water, coloured complexes for colorimetry such as ), extraction of metals (cyanide process for gold: ), electroplating baths, biological systems (haemoglobin, chlorophyll, vitamin ) and medicine (cisplatin).

Example 4.2

4.2

(a) absorbs maximally at . Find in and the CFSE. (b) Calculate the CFSE (in units of ) of high-spin and low-spin octahedral (, neglecting pairing energy), and the spin-only moment of high-spin .

(a) Splitting and CFSE of :

The single electron is in , so .

(b) CFSE of : High spin: , . Low spin: , (but one extra pair must be formed).

(c) Magnetic moment: is ; is a weak-field ligand, so all five electrons are unpaired: .

Answer:

(a) , ; (b) (high spin) and (low spin); .


4.2 Rare earth elements: introduction and applications

The rare earth elements are the lanthanides ( to , to ) together with scandium and yttrium. They are not really rare in the crust (cerium is as abundant as copper), but they occur dispersed in minerals such as monazite and bastnaesite and are hard to separate because of their very similar chemistry.

Characteristics:

Applications of Rare Earth Elements
Element or compoundApplication
Nd, Dy (as )Strongest permanent magnets: electric vehicle motors, wind turbines, hard disks
Eu, Tb, Y (phosphors)Red and green light in television and LED lamps, fluorescent lamps
Catalytic converters (oxygen storage), glass polishing, UV filters
LaNickel-metal-hydride batteries, camera lenses, FCC cracking catalyst
Nd:YAG ( doped with Nd)Solid-state lasers for cutting and surgery
GdMRI contrast agents, neutron absorber
Mischmetal (Ce, La, Nd, Pr)Lighter flints and alloying additive in steel

Rare earths are classed as critical raw materials because their mining produces radioactive waste (thorium) and they are concentrated in a few countries; recycling of magnets and lamps is therefore important.


4.3 Metallic alloys and applications

An alloy is a homogeneous mixture of two or more metals, or of a metal with a non-metal, formed by melting the components together and cooling.

Purposes of alloying: to increase hardness and strength, to improve corrosion resistance, to lower the melting point, to improve machinability and casting, to give a desirable colour or appearance, and to modify electrical or magnetic properties.

Types: substitutional alloys (atoms of similar size replace one another, as in brass) and interstitial alloys (small atoms such as C fit in gaps of the metal lattice, as in steel); also ferrous (iron-based) and non-ferrous alloys.

Important Alloys, Composition and Uses
AlloyCompositionSpecial propertyUse
Mild steelFe with to CTough, ductile, weldableStructures, bars, sheets
High-carbon steelFe with to CHard, brittleTools, springs, cutting edges
Stainless steelFe, to Cr, NiPassive layer resists rustingUtensils, surgical instruments
BrassCu to , Zn to Strong, easily worked, goldenTaps, instruments, fittings
BronzeCu , Sn Hard, corrosion resistantBearings, statues, coins, bells
DuraluminAl , Cu , Mg and Mn Light and strongAircraft and automobile parts
SolderSn to , Pb to (lead-free: Sn-Ag-Cu)Low melting pointJoining electronic and plumbing parts
NichromeNi , Cr , Fe High resistivity, withstands heatHeating elements
AlnicoAl, Ni, Co, FeStrongly magneticPermanent magnets
InvarFe , Ni Almost zero thermal expansionClocks, precision tapes

Effect of carbon in steel: increasing carbon raises hardness and tensile strength but lowers ductility and weldability. Alloying elements add specific properties: Cr (corrosion resistance and hardness), Ni (toughness), Mn (hardness and wear), Mo and W (heat resistance, high-speed tools), V (strength).

Example 4.3

4.3

A sample of brass contains Cu and Zn by mass. Find the mass of each metal, the number of moles, and the atom percentage of Cu (, ).

Masses and moles: , .

Atom percentage of Cu:

Answer:

Cu and Zn; and ; atom percent Cu (almost the same as the mass percent because the atomic masses are close).


Exercises

Practice Exercises — Complexes, Rare Earths and Alloys

Question 1

State the postulates of Werner's theory. Explain why of gives of AgCl with excess () whereas gives none.

Postulates: A metal has a primary (ionizable) valence equal to its oxidation state and a secondary (non-ionizable) valence equal to its coordination number; both are satisfied; secondary valences point in fixed directions in space.

Evidence: In all chloride ions are counter ions, so AgCl . In all three are inside the coordination sphere, bonded by secondary valences, so no ion is free to precipitate.

Answer:

of AgCl in the first case and none in the second.

Question 2

Using valence bond theory, predict the hybridization, geometry and magnetic moment of and (: ). Why do the two differ?

: is . Weak-field does not pair the electrons, so the and three orbitals hybridize: , tetrahedral, two unpaired electrons, (paramagnetic).

: Strong-field pairs the electrons in the orbitals, freeing one orbital: hybridization, square planar, no unpaired electron, diamagnetic.

Answer:

: , tetrahedral, . : , square planar, diamagnetic. The difference is due to the ligand field strength.

Question 3

Explain crystal field splitting in an octahedral complex and why some complexes are high spin and others low spin. Calculate the CFSE of low-spin (, ignoring pairing energy) and of high-spin (), and the wavelength absorbed by a complex with .

Splitting and spin: The orbitals point at the ligands and are raised by , the orbitals are lowered by . If is smaller than the pairing energy (weak-field ligand), electrons enter (high spin); if larger (strong-field ligand), they pair in (low spin).

CFSE: Low-spin : , . High-spin : , .

Wavelength: .

Answer:

for low-spin ; for high-spin ; .

Question 4

What are rare earth elements? Explain the lanthanide contraction and mention five applications of rare earth elements.

Rare earths and the contraction: The lanthanides with Sc and Y; configuration , usually . Across the series the electrons shield the increasing nuclear charge poorly, so the atomic and ionic radii decrease from () to (). This makes their chemical properties very similar (hard to separate) and makes the 4d and 5d elements of the same group nearly equal in size.

Applications: NdFeB permanent magnets in motors and wind turbines; Eu and Tb phosphors in lamps and displays; in catalytic converters and glass polishing; Nd:YAG lasers; La in NiMH batteries and Gd in MRI contrast agents.

Answer:

Rare earths are Sc, Y and the lanthanides; the lanthanide contraction is due to poor shielding.

Question 5

What is an alloy? State four objectives of alloying and give the composition and use of brass, bronze, stainless steel and duralumin. How much of each metal is in of solder containing Sn and Pb?

Alloys and purposes: An alloy is a homogeneous mixture of metals (or of a metal with a non-metal). Alloying increases hardness and strength, resists corrosion, lowers the melting point and improves casting and machining.

Examples: Brass (Cu to , Zn): fittings and instruments. Bronze (Cu , Sn ): bearings, bells and statues. Stainless steel (Fe with to Cr and Ni): utensils and surgical tools. Duralumin (Al , Cu , Mg, Mn): aircraft parts.

Solder: and .

Answer:

of Sn and of Pb.

← Analytical Techniques and their ApplicationsSustainable Chemistry →